Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Lake Dallas
Gate repair in Lake Dallas typically runs $180 – $650 depending on the problem, and most calls are completed same-day when you reach us before 2 PM. Our crews work out of the Dallas-Fort Worth office and know the Lake Dallas area well, from the lakeshore properties along Hundley Drive to the newer subdivisions near Swisher Road.
A stuck gate at your Lake Dallas home means more than a hassle. It means you’re either trapped inside or your property is wide open. We answer the phone with a live person 24 hours a day, dispatch background-checked technicians in uniform, and give you a written price before any work starts. Call (469) 530-2485 now.
Why Carver Gate Repair Is Lake Dallas’s Preferred Gate Repair Company
We’ve built our reputation in Lake Dallas on showing up when we say we will and leaving the site clean. The Garrison Standard doesn’t allow anything less. Our technicians carry the right parts for nine major brands, so we don’t waste your afternoon running back to the warehouse.
Lake Dallas homeowners call us back because the price we write down is the price they pay. No surprises at the door. The 365-Day Done Right Promise covers every repair we make here, and if something fails inside that window, we come back free of charge.
Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but the crews serving Lake Dallas live and work in this market. They know the difference between a gate on the lake side dealing with constant humidity off Lewisville Lake and one up near the I-35E corridor catching full afternoon sun. That local knowledge saves time and gets the diagnosis right the first time.
Metal Gate Repair in Lake Dallas
Metal Gate Repair in Lake Dallas covers everything from rusted hinge welds on lakeside properties to bent pickets from storm debris and failed magnetic locks on security gates. The constant moisture coming off Lewisville Lake accelerates corrosion on iron and steel gates, especially for homes near the shoreline or in low-lying pockets where fog sits heavy in the mornings. A typical metal gate repair in Lake Dallas runs $220 – $480 for hinge and post work, $180 – $340 for weld repairs, and $280 – $650 if the gate needs realignment after a vehicle impact or foundation shift.
Weld and Rust Restoration
We cut out rotted sections, fabricate matching pieces, and weld them clean. Then we apply a rust-inhibiting primer and touch-up paint that matches your existing finish. For Lake Dallas homes near the water, we often recommend upgrading to stainless hardware during the repair, which adds $40 – $80 to the job but doubles the lifespan of the connection.
Hinge and Post Realignment
Metal gates sag when the post footing shifts or the hinge pin wears oval. We reset posts with concrete rated for North Texas clay soil, which swells and contracts dramatically through wet and dry seasons. The written price includes the post, concrete, and hinge hardware, and we check the gate swing before we leave.
Wood Gate Repair in Lake Dallas
Wood Gate Repair in Lake Dallas addresses rot at the base of posts, warped boards from summer heat and humidity, and frame separation where the gate has been dragging. The combination of Lewisville Lake moisture and intense Texas sun creates expansion and contraction cycles that tear wood gates apart faster than in drier inland markets. Typical wood gate repair in Lake Dallas costs $200 – $420 for board replacement and frame tightening, $260 – $550 for post replacement, and $180 – $320 for hardware upgrades.
Rot and Frame Rebuilds
We probe the post base and bottom rail with an awl. If the wood crumbles, we replace with pressure-treated 4×4 or 6×6 stock, sealed at the cut, and set in gravel for drainage. Lake Dallas soil holds moisture longer than areas west of I-35E, so drainage detail matters here.
Board Replacement and Matching
We source cedar and pressure-treated pine that matches your existing gate’s grain and weathering stage. New boards are pre-drilled and fastened with coated screws, never nails that work loose. The written price includes material, labor, and one return trip if the stain match needs adjustment after weathering.
Trusted Brands We Service in Lake Dallas
Our Lake Dallas technicians are trained on FAAC, BFT, Linear, and Viking control boards, operators, and safety systems. We stock common failure parts locally, including FAAC 740 gearboxes, Linear actuators, and Viking limit switches, so your gate isn’t sitting open for a week waiting on a warehouse shipment. When you call about a Gate Motor Repair in Lake Dallas, we ask for the brand and model number so the technician shows up with the right components already on the truck. That preparation is part of The Garrison Standard, and it’s why we can offer same-day resolution on most motor and control issues.
Common Gate Repair Problems We See in Lake Dallas Homes
- Corroded hinge pins on lakeside properties. The humidity off Lewisville Lake condenses on metal hardware overnight, especially on gates facing east. We see this most often in the Hundley Drive corridor and near the marina. Stainless steel upgrades solve it permanently.
- Foundation-shifted posts after spring rains. North Texas clay swells when saturated, then shrinks in summer drought. Gates on the Swisher Road side of town, where newer fill soil hasn’t fully compacted, are especially prone to post tilting and latch misalignment.
- Control board failures from power fluctuations. Lake Dallas sits at the end of several rural feeder lines where voltage can spike during storms. We install surge protection on FAAC and Linear systems, and we keep replacement boards in stock for same-day swap-outs.
- Articulating arm binding on uphill swings. Lots in the rolling terrain near the lake’s edge put unusual angles on swing gates. Viking and BFT articulating arms handle this better than linear actuators, but only if the limit switches are calibrated to the actual travel path, not a flat-ground default.
Pricing for Gate Repair in Lake Dallas, TX
Gate repair pricing in Lake Dallas follows the complexity of the fix and the hardware involved. Here’s what we typically see in this market:
| Service | Typical Range in Lake Dallas |
|---|---|
| Hinge and post repair | $220 – $480 |
| Weld and rust repair | $180 – $340 |
| Gate realignment | $280 – $650 |
| Wood board replacement | $200 – $420 |
| Wood post replacement | $260 – $550 |
| Lock and latch repair | $150 – $280 |
| Control board replacement | $320 – $580 |
| Motor / operator repair | $280 – $620 |
These ranges include parts, labor, and our 365-Day Done Right Promise. The exact price depends on gate size, material thickness, and whether the post footing needs excavation. We measure, diagnose, and write the price on a ticket before any work begins. You approve it. Then we start. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Lake Dallas
Our Gate Repair in Lake Dallas coverage extends to Little Elm, Lewisville, Argyle, and The Colony. If you’re on the border between Lake Dallas and one of these neighboring cities, we’ll confirm your service area when you call and dispatch the closest available crew.
Serving Lake Dallas, TX – Our Local Coverage Area
We’re based in the Lake Dallas area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Lake Dallas
Most Lake Dallas calls are dispatched same day if you reach us before 2 PM, and emergency lockouts or security breaches get priority routing. Our Dallas-Fort Worth coordination center tracks technician location in real time, so we give you an arrival window, not a vague “sometime this afternoon.”
Yes, we work from the lakeshore properties along Hundley Drive through the Swisher Road corridor and all residential areas in between. Our Gate Repair crews know the local soil conditions, drainage patterns, and typical gate setups for each part of town.
Yes, our phones are staffed by a live person 24 hours a day, 7 days a week, including holidays. If your gate is stuck open after hours or won’t secure before a storm, we can often have a technician on site within a few hours. Call (469) 530-2485 anytime.
Lake Dallas pricing sits in the middle of our local market, slightly below The Colony and on par with Little Elm. The lakeside humidity here means we see more corrosion-related work than in drier Argyle, which can push some jobs toward the higher end of the range. We quote every job in writing before starting, so you know exactly where you stand.
Every repair carries our 365-Day Done Right Promise in writing. If the same component fails or the same problem returns within one year of service, we come back and fix it at no charge. No argument, no re-diagnosis fee. This guarantee applies to all Lake Dallas work and is backed by the Garrison Partners family of companies.
Ready to get your gate working right? Call Carver Gate Repair at (469) 530-2485 for a free, written estimate. Our background-checked technicians serve Lake Dallas with upfront pricing, clean sites, and a full-year guarantee on every repair.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Lake Dallas and the greater Dallas-Fort Worth area since 2008.