Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Ocoee
A gate that won’t open, drags on the ground, or trips its breaker is a problem you can’t put off in Ocoee. Most repairs we handle in this area run $185 to $640 depending on what failed, and we schedule a technician to your home with a written price before any work begins. Our team knows the neighborhoods off Ocoee-Apopka Road, around Starke Lake, and through the newer developments east of the West Orange Trail. Call (469) 530-2485 and a live person answers, day or night.
Why Carver Gate Repair Is Ocoee’s Preferred Gate Repair Company
Homeowners in Ocoee call us because we do one thing – gates. No general handyman work, no “we also do fences and decks.” Just gate repair, gate installation, and our Gate Motor Repair in Ocoee. That focus means our technicians have seen the specific failures that Ocoee’s sandy soil and summer storms cause, and they carry parts for the major brands on the truck instead of ordering and making you wait.
Every Carver technician is background-checked and uniformed before they step onto your property. You know who’s pulling into your driveway. The price is written before work starts, so the number doesn’t move once the job is open. And if a repair fails within a year, we come back at no charge. That’s the Garrison Standard – it’s been the operating rule since 2008, and it’s written on every job we do in Ocoee.
Lonnie Burke leads the crew, and he’s particular about two things: showing up when we say we will, and leaving a gate that works like it should. The guarantee backs that up. A full year, in writing, on every repair.
Gate Welding in Ocoee
Gate Welding in Ocoee is often the most direct fix when a steel or iron gate has cracked at a hinge point, snapped an ornamental picket, or pulled a weld loose where the operator arm attaches. Rust combined with the daily torque of an automatic opener creates stress fractures over time. We cut out the damaged section, prep the steel, and weld it solid using proper penetration and gusseting where needed so the repair outlasts what failed originally. Most Ocoee gate welding jobs run $250 to $850 depending on the extent of the crack, the metal thickness, and whether we’re also correcting alignment the damage caused.
When Welding Beats Replacement
A cracked weld on a hinge plate or a broken picket doesn’t mean the whole gate needs to go to the scrap pile. If the frame is sound and the damage is localized, welding restores strength at a fraction of replacement cost. We’ll tell you straight if the metal is too far gone – rust-through along the bottom rail usually means new steel, not a patch.
Post-Weld Alignment Checks
After any weld repair, we check the gate’s swing arc, latch engagement, and operator travel. A weld that’s even slightly misaligned makes the motor strain and shortens its life. We adjust and test before we call the job done.
Commercial Gate Repair in Ocoee
Commercial Gate Repair in Ocoee covers slide gates, barrier arms, and heavy swing gates at offices, warehouses, and apartment complexes along State Road 50 and the industrial parks near the Turnpike. These systems cycle dozens or hundreds of times a day, so the failure points are different from a residential driveway gate – limit switches wear, loop detectors fail, and slide rollers pick up sand and debris that grinds them down. Typical commercial repairs in Ocoee run $350 to $1,400, with full slide gate motor replacements running higher depending on horsepower and control integration.
Loop Detector and Access Control Issues
When a commercial gate stops responding to vehicles but works on the keypad, the loop detector in the pavement is usually the problem. Florida’s heat and moisture break down the loop wiring over time. We test, locate the break, and repair or replace the loop so your employees and tenants aren’t stuck waiting at the entry.
Heavy-Duty Slide Gate Track Service
Slide gates in Ocoee commercial settings take a beating. Sandy soil from surrounding lots gets into the track, rollers wear flat, and the gate starts jumping or binding. We service the full run – track, rollers, guide wheels, and the operator’s torque output – on brands including DoorKing and Elite.
Trusted Brands We Service in Ocoee
Our technicians are factory-trained on the systems most common across Ocoee homes and businesses, including Gate Repair work on LiftMaster, FAAC, and BFT operators, plus Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when you’re waiting on parts. We keep common boards, limit switches, remotes, and photocells stocked in the Orlando office that dispatches to Ocoee, so most repairs don’t stall waiting for a shipment. If you have an older operator or a brand that’s been discontinued, we’ll match compatible parts and test the unit before we leave.
Common Gate Repair Problems We See in Ocoee Homes
- Settling posts and dragging gates. Much of Ocoee sits on former citrus grove land with sandy, high-water-table soil. After heavy summer rain, gate posts shift, the gate sags, and suddenly it’s scraping the driveway or won’t latch.
- Operators losing limit settings. Florida thunderstorms bring power flickers and surges. LiftMaster and FAAC operators in Ocoee frequently reset or lose their limit programming after outages, leaving the gate stuck half-open or reversing for no clear reason.
- Photocell and keypad corrosion. Humidity and irrigation overspray near driveways corrode safety eye wiring and keypad contacts. The gate thinks something is in the path and refuses to close, or the keypad stops reading your code.
- Hinge and weld fatigue on heavy gates. Ornamental steel gates have a lot of weight hanging on two or three hinges. Over years, the welds crack and the hinges wallow out, especially on longer driveways where the gate catches wind off the lakes.
Pricing for Gate Repair in Ocoee, FL
Here’s what you can expect to pay for common Gate Repair in Ocoee. Hinge replacement runs $165 to $380 per hinge. Gate realignment and post shimming is $185 to $420. Safety photocell replacement runs $140 to $260. Operator limit switch or control board repair is $220 to $540. A full motor replacement on a single swing gate typically lands between $650 and $1,400 including labor. Welding repairs fall in the $250 to $850 range. The written price you get before we start is the price on the invoice – no surprises after the job is open. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Ocoee
Our Gate Repair team covers the whole west Orange County area. We dispatch to Apopka, Winter Garden, Oakland, and Orlando from our metro office, so scheduling is consistent wherever you are. If you’re just outside Ocoee, give us a call and we’ll confirm coverage for your street.
Serving Ocoee, FL – Our Local Coverage Area
We’re based in the Ocoee area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Ocoee
Dragging gates in Ocoee are usually a post settlement problem, not a worn hinge. The sandy former citrus grove soil here holds water and shifts after heavy rain, letting the hinge post lean and the gate sag. We fix it by re-setting the post in concrete, shimming the hinge, or re-pouring the footing if the post has moved enough to matter. In one case off Ocoee-Apopka Road near the West Orange Trail, a 14-foot swing gate had shifted so far it wouldn’t latch. We re-poured the footing, corrected the sag, and re-leveled the operator arm, then tested the safety photocells and set the reversal per UL 325 before we left. Call (469) 530-2485 and we’ll check your post footing first.
Yes. We repair slide gates, barrier arms, and heavy swing gates at commercial properties throughout Ocoee, including offices and warehouses along State Road 50 and the industrial areas near the Turnpike. Commercial jobs run $350 to $1,400 on average depending on the gate type and what failed. Call (469) 530-2485 for a commercial estimate with a written price.
Yes. Automatic gates in Florida are required to have entrapment protection – photocells or contact edges that reverse the gate if something is in the way – and the system must meet UL 325 standards for reversal force. We test the photocells and the reversal pressure on every automatic gate repair we do in Ocoee because a misaligned sensor or an over-pressured operator is the most common reason a gate refuses to close. Call (469) 530-2485 and we’ll inspect your safety system as part of the repair.
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. Most Ocoee homes have one of these operators, and our trucks carry common parts for all of them, so we’re not waiting on a shipment before we can fix your gate. If your operator is older or discontinued, we’ll source compatible parts and test the repair before we leave. Call (469) 530-2485 with your brand and model.
Most repairs are completed in a single visit, usually 1 to 3 hours on site. Hinge replacements, sensor swaps, and operator board replacements are typically same-visit fixes. A full gate installation in Ocoee takes longer – measured, ordered, and scheduled days out, never promised same-day – because it includes groundworks, possibly new post footings, the power run, safety edges, and UL 325 reversal testing. We give you a timeline in writing along with the price. Call (469) 530-2485 to schedule.
Contact Carver Gate Repair in Ocoee
If your gate is dragging, stuck, or refusing to close, call (469) 530-2485. You’ll get a live person on the phone, a background-checked technician at your door, and a written price before any work starts. Every repair in Ocoee carries our full-year guarantee, in writing. Free estimates, every job.
Written by Lonnie Burke, Owner at Carver Gate Repair, operating to The Garrison Standard since 2008.