Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Ontario
Gate repair in Ontario comes down to one thing: a crew that understands what the Santa Ana winds and clay soil do to a gate system. Most repairs here aren’t panel problems. They’re post problems, footing problems, and operator problems caused by the ground shifting under the gate. Our technicians live and work in the Inland Empire, and we get to Ontario homes fast. When a swing gate starts dragging or a slide gate stalls off its track, call (469) 530-2485 and speak to a live person. We’ll give you a written price before any work starts, and that price doesn’t move at the door.
Why Carver Gate Repair Is Ontario’s Preferred Gate Repair Company
Ontario homeowners call us because we do one thing and we do it without excuses. Gate work isn’t a side job for us. Our Gate Repair team carries parts for nine motor brands, including FAAC, BFT, Linear, and Viking, so we’re not running across town mid-job to find a limit switch. When a homeowner near the Ontario Mills area has a gate that won’t close, they need a technician who arrives with the right parts on the truck. That’s how we work.
Lonnie Burke runs our crews to a standard that’s been set since 2008, under the Garrison Standard. Written prices, background-checked technicians, and a 365-Day Done Right Promise on every repair. That guarantee is in writing, not a handshake. If the repair fails inside that window, we return and fix it at no charge. Homeowners who’ve been burned by no-show techs and inflated invoices notice the difference immediately.
We dispatch from our Inland Empire office, and Ontario is squarely inside our regular service rotation. When you call, you reach a person. Not a voicemail. Not a call-center queue. Someone who can tell you when a technician will arrive and what the job will cost.
Sliding Gate Repair in Ontario
Sliding gate repair in Ontario usually tracks back to two things: the track and the footing. Ontario’s heavy clay soil expands when wet and contracts when dry. That movement shifts post footings and throws slide gate tracks out of alignment by a quarter inch or more. A quarter inch is enough to make the gate stall, jerk, or trip the operator. Our crew sees this constantly in older tracts where gates were poured decades ago.
Track Correction and Re-Leveling
We pull the gate off the track, check the rollers and bearings, and re-level the track with shims or a re-pour where the footing has sunk. We don’t adjust the operator and call it done. The track has to be right first. In Ontario, our steel track work usually runs $350 – $850 depending on how much of the run needs re-leveling and whether the rollers are shot.
Operator and Safety Edge Repair
When a slide gate operator runs but the gate barely moves, it’s often a sheared sprocket or a stripped drive gear. We replace those and then test the safety edge and reversal per UL 325. A gate that won’t reverse on contact is a code violation and a liability. Most operator repairs in Ontario run $275 – $650 including parts and testing.
Wrought Iron Gate Repair in Ontario
Wrought iron gate repair in Ontario is rarely about the iron itself. Those gates look heavy and solid, but the failure point is almost always the hinge post. Ontario’s inland wind loads and winter Santa Ana events push swing gates hard against their posts. The clay soil underneath gives way slowly over time. Homeowners notice a gate that sags at the latch side, drags on the ground, or binds mid-swing.
Hinge Post Re-Setting and Re-Pour
We cut the gate off at the hinges, pull the post, re-dig the footing, and pour a new concrete base with proper depth for the wind load. This is not a patch job. A re-pour takes concrete 24 – 48 hours to cure before we re-hang the gate. In Ontario, hinge post re-setting runs $450 – $1,100 depending on post size and how much concrete we’re replacing.
Realignment and Latch Repair
Once the post is solid, we re-hang the gate and align the latch. Wrought iron gates need the latch to catch cleanly without slamming. We also check the gate’s swing arc for obstructions and adjust the stop so the operator isn’t fighting the gate at full travel. Latch and realignment work typically runs $180 – $400.
Trusted Brands We Service in Ontario
Our Ontario customers have FAAC swing operators on custom estate gates, BFT slide operators on commercial entries, and Linear units running driveway gates in older neighborhoods. We also service LiftMaster, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. We keep common FAAC and Linear boards, limit switches, and remote receivers stocked on our trucks, so when a homeowner in Ontario calls at 7 a.m. with a gate stuck open, we can often fix it on the first visit. No waiting a week for parts to ship.
Common Gate Repair Problems We See in Ontario Homes
- Shifted hinge posts on swing gates. Ontario’s clay soil expands and contracts with rain and drought, pushing posts out of plumb. The gate sags, the operator strains, and the problem gets worse every windy weekend.
- Phantom openings on automatic slide gates. Loop detectors under the driveway can trip when winter rain ponds in low spots or when driveway rebar gets magnetized over time. The gate opens on its own at night and the homeowner thinks someone’s in the yard.
- Stalled operators on older slide tracks. When post footings sink even a half inch, the slide track binds and the operator stalls mid-cycle. The motor’s fine. The geometry underneath it isn’t.
- Worn rack and pinion on LiftMaster and FAAC units. Inland wind puts constant load on the drive gear. Over time, the teeth wear and the gate moves in jerks before it stops entirely.
Pricing for Gate Repair in Ontario, CA
Gate repair pricing in Ontario isn’t a mystery. A hinge adjustment with minor realignment starts around $180. Replacing a swing gate operator runs $650 – $1,400 depending on brand and gate weight. A full hinge post re-pour with new concrete runs $450 – $1,100. Track re-leveling for slide gates falls between $350 – $850. We give you a written price before any work starts. That number doesn’t change unless you approve additional work in writing. Estimates are free. Call (469) 530-2485 and we’ll walk you through what your gate needs and what it’ll cost.
We Also Serve Cities Near Ontario
Our crews run Gate Repair in Ontario daily, and we also cover Montclair, Claremont, Upland, and Rancho Cucamonga. If you’re on the edge of Ontario or just over a city line, call us. We’ll tell you straight whether you’re in our regular service area and when a tech can be there.
Serving Ontario, CA – Our Local Coverage Area
We’re based in the Ontario area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Ontario
The hinges usually aren’t the problem. Ontario’s clay soil shifts the post footing underneath the gate, and inland wind pushes the gate hard against that post every time it blows. Adjusting the hinge is a band-aid. The honest fix is re-setting the post in a new concrete footing sized for the wind load. That’s what stops the sagging. Call (469) 530-2485 for a free assessment of your post and footing.
For slide gates, it’s usually a sheared sprocket, worn rack and pinion, or a track that’s binding from a shifted footing. For swing gates, it’s often a post so far out of plumb that the operator is fighting the gate’s weight. We diagnose it on-site and give you a written price for the repair before we touch a tool. Estimates are free.
Yes. Automatic gate operators in California must comply with UL 325 entrapment protection requirements, which means working safety edges, photocells, and reversal testing. We test every gate we repair against UL 325 before we clear the job. If your gate doesn’t reverse on contact, it’s not just a repair issue. It’s a safety and code issue.
A complete gate installation, including groundworks, post setting, power runs, operator mounting, and safety edge installation, typically takes two to four days depending on gate size and access. We schedule a free measure first, write up a detailed scope and price, and give you a realistic timeline. We don’t promise same-day installation because a poured footing needs cure time before a gate hangs on it.
If you have an automatic slide gate, phantom openings are almost always a loop detector issue. Ontario’s winter rain can pond water over the loop, and magnetized rebar in older driveways can cause false triggers. We test the loop with a meter and replace the detector or re-cut the loop if needed. If we rule out the loop, we move to the keypad and remote receivers. Call (469) 530-2485 and we’ll track it down.
Get Your Ontario Gate Fixed Right
We got a call in Ontario’s Creekside neighborhood to a LiftMaster-powered swing gate that started dragging and reversing mid-swing after a windy weekend. The hinge post footing had shifted, and the rack and pinion on the operator was binding. We re-poured the hinge post footing, corrected the sag, releveled the slide gate track, and retested the safety photocell and reversal per UL 325 before clearing the job.
That’s the kind of repair Ontario gates need. Not a quick adjustment that looks fine for three weeks. The ground here moves. The wind here pushes. The fix has to account for both.
Call (469) 530-2485 for a free estimate. You’ll get a live person, a written price, and a technician who knows exactly what Ontario ground does to a gate.
Written by Lonnie Burke, Owner at Carver Gate Repair. Operating to the Garrison Standard since 2008.