Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Orlando
Gate repair in Orlando usually runs between $185 and $650 depending on the failure. A sagging swing gate from a settled hinge post, a fried control board after a storm, a slide gate grinding off its track. Most repairs we schedule in Orlando are done in a single visit because we carry common Linear, Viking, Ghost Controls, and DoorKing parts on the truck. Call (469) 530-2485 and a live person picks up, day or night. We serve every Orlando neighborhood, from College Park to Lake Nona to Dr. Phillips, with written pricing before any work starts.
Why Carver Gate Repair Is Orlando’s Preferred Gate Repair Company
Orlando homeowners call us because the price we quote is the price on the invoice. Every job gets a written price before the first tool comes out, and every repair carries a written guarantee for a full year. That is The Garrison Standard, and it has been our operating rule since 2008. Lonnie Burke leads our Orlando team, and every technician who shows up at a home near Baldwin Park or Thornton Park is background-checked and in uniform. You know who is at your gate before you open it.
Our Gate Repair crews work exclusively on gates and gate motors. We do not do fences on the side, we do not do general contracting between jobs. That focus is why a tech can diagnose a Viking swing operator or a Ghost Controls board in the first fifteen minutes of the visit instead of guessing through a manual. When an Orlando customer calls about a gate dragging on the driveway in the morning after a storm, the tech already knows what to look for before he pulls into the street.
Reviews from Orlando customers point to the same things that hold everywhere else we work: the tech showed up inside the window, left the site clean, and charged what he wrote down. Those are not compliments to us, they are the baseline. We hold every Orlando job to that standard because a gate that does not close is a security problem, not a cosmetic issue.
Wrought Iron Gate Repair in Orlando
Wrought iron gate repair in Orlando is usually about the frame and the foundation, not the pretty scrollwork. A heavy ornamental gate that has been hung for ten or fifteen years starts sagging when the hinge post footing settles into sandy soil after a few heavy rainy seasons. Orlando sits on a high water table, and the concrete around those posts cracks and shifts. The panel itself might be straight and solid while the whole assembly drags on the driveway by an inch or two.
When we repair a wrought iron gate here, the first measurement is post plumb, not panel alignment. If the post has moved, we reset it and re-pour the footing before re-hanging the leaf. Then we weld or replace a worn hinge barrel and re-level the latch so it catches cleanly. A typical post reset and re-hang in Orlando runs $350 to $650. A simpler hinge or latch repair runs $185 to $320.
Rust and Weld Repair
Florida humidity never really stops, and Orlando afternoon storms keep the air wet most of the year. Wrought iron gates here eventually rust at the bottom rail and at every weld joint where water sits. We cut out the thin sections, weld in new steel, and coat the repair so it ages with the rest of the gate. A small rust patch near the ground is a $230 to $400 repair. If the lower rail is rotted through end to end, you are closer to a rebuild than a patch, and we will tell you that before we cut anything.
Gate Realignment
A wrought iron gate that latches but scrapes the ground near the free end usually means the post settled and the panel is leaning. We re-level the leaf, adjust the hinge shims, and set the latch height. Most realignment work in Orlando is $220 to $380. We do not spray the hinges with lubricant and call it fixed. A fixed gate closes without being lifted or shoved.
Metal Gate Repair in Orlando
Metal gate repair in Orlando covers steel and aluminum gates, both ornamental and utilitarian. Steel gates here tend to fail at welds and rust lines. Aluminum gates more often sag because the post was not set deep enough for Florida’s sandy soil. Orlando’s freeze risk is near zero, but the ground moves with water, not with frost, and that movement is slower and harder to notice until the gate starts dragging.
The most common metal gate repair we perform in this city is a hinge post reset on a sagging gate. We dig out the old footing, set the post in new concrete, and hold the gate level while it cures. That job runs $400 to $680 for a single swing leaf, more for a heavy double gate. The second most common is a failing weld at the hinge or at the bottom rail, which runs $185 to $350 depending on how much steel has rotted.
Hinge and Post Repair
Most Orlando gate failures are not the gate at all, they are the post underground. A post that leans outward by three degrees is enough to drag the latch side down by half an inch. We rebuild the footing, not just the bracket on top. When we replace a hinge, we use a heavier barrel than the original if the gate is heavy, because the original was usually the weakest part of the install.
Lock and Latch Repair
Orlando gates take abuse from heat, rain, and daily cycling, and the latch is the first moving part to wear out. A loose latch lets the gate rattle and eventually spring open. We rebuild or replace latches and keyed locks on metal gates for $160 to $290. If the gate needs a loop detector or keypad tie-in on top of the latch, we quote that separately and in writing before the work starts.
Trusted Brands We Service in Orlando
Our Orlando techs work on Gate Repair in Orlando systems running Linear, Viking, Ghost Controls, and DoorKing operators, among others. That means we stock the limit switches, control boards, and remote receivers for these brands on the truck, so a repair does not become a two-week parts wait. A DoorKing slide operator with a stripped rack and a Viking swing arm with a failed capacitor are both jobs we have done dozens of times in this market. You do not need a different company for your gate and your motor. One crew, one written quote, one guarantee.
Common Gate Repair Problems We See in Orlando Homes
- Settled hinge post footings: Orlando’s sandy, high-water-table soil lets concrete footings shift after heavy summer rain, and the whole gate sags. We reset the post and re-pour the footing, because tightening the hinge bolts does not fix what moved underground.
- Lightning-damaged control boards: Central Florida thunderstorms send power surges through gate operators and fry circuit boards. The operator looks fine from the outside, but the gate does not respond. Board replacement is one of our most common Orlando repairs in the summer.
- Corroded rack and pinion drives: Year-round humidity and afternoon storms leave slide gate tracks and drive racks with a steady film of moisture. That turns into rust and stripped teeth on the pinion gear. We replace the drive gear and re-track the gate.
- Photocell failures from surge and salt air: Safety photocells near the coast or near retention ponds fail faster in this climate, and a failed photocell stops the gate from closing cleanly. We test and replace the pair together, not one at a time.
Pricing for Gate Repair in Orlando, FL
Here are the numbers our Orlando customers see most often. A sagging gate from a settled post runs $400 to $680. A fried control board replacement runs $260 to $480. Hinge and latch work runs $160 to $320. A full wrought iron post reset with re-hang runs $350 to $650, more if the gate is double. Slide gate track and drive repair runs $280 to $550. Every price is in writing before work starts, and the number does not change when the job is open. Call (469) 530-2485 for a free estimate on your specific gate.
We Also Serve Cities Near Orlando
Our Orlando crews also run calls to Winter Park, Maitland, Goldenrod, and Altamonte Springs. If your gate is on the north side of town or just over the Seminole County line, the same written-price guarantee and the same background-checked techs apply. We schedule by neighborhood, so a Goldenrod call and a College Park call usually run in the same day.
Serving Orlando, FL – Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Orlando
Because the post footing is moving in sandy soil, not the panel itself. Orlando’s high water table and heavy summer rain cause concrete footings to settle, which tilts the hinge post and drags the gate down. Tightening hinges or welding the panel does not fix an underground shift. The repair is a post reset with a new footing, and in Orlando that runs $400 to $680. Call (469) 530-2485 and our tech will check post plumb before touching the panel.
Yes, and we will not install or repair an automatic gate in Orlando without testing them. Photocells stop the gate from closing on a car, a child, or a pet, and Florida’s storm activity shortens their lifespan. If your gate won’t reverse after touching something, the photocells or the force setting are the first things we check. We replace them in pairs and test the reversal on a test block before we leave.
Our Orlando techs service Linear, Viking, Ghost Controls, and DoorKing operators, among others. That includes swing arms, slide operators, and the control boards that run them. We carry common boards, limit switches, and remote receivers for these brands on the truck, so most Orlando repairs are done in one visit. If your operator is a brand we do not stock, we tell you that on the phone before we schedule the appointment.
Orlando’s thunderstorms and humidity do two things: lightning surges fry control boards and photocells, and constant moisture corrodes rack and pinion drives and slide tracks. A gate that fails after a summer storm usually has a board issue. A gate that grinds or stutters along its track usually has a rust and wear issue. Both are repairable, and both are jobs our Orlando crews see weekly from June through September. Call (469) 530-2485 to schedule a diagnostic visit.
Most hinge, latch, board, and photocell repairs are done in a single visit, usually within two to four days of your call depending on the neighborhood and parts. Post resets and concrete work need a day to cure before the gate is re-hung, so plan for two visits. A full custom gate installation is measured, ordered, and scheduled, not rushed. We give you the timeline in writing with the price, and the estimate is free.
When your gate is down in Orlando, call (469) 530-2485. A live person answers, we give you a written price before any work starts, and every repair carries a full-year guarantee. That is how we run every job from Lake Nona to Winter Park.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Orlando.