Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Rohnert Park
Gate repair in Rohnert Park typically runs $180 to $340 for sensor, hinge, and keypad fixes, while full operator replacement on an automatic gate lands between $850 and $1,800 depending on the brand and whether the footing is still sound. Our crew serves the whole city, from the M Section to Country Club, and we answer the phone around the clock at (469) 530-2485. If your gate is dragging the concrete, failing its safety reverse, or dead at the keypad, the fix usually starts with an honest assessment of what is actually broken, not a guess.
Why Carver Gate Repair Is Rohnert Park’s Preferred Gate Repair Company
Our Gate Repair team works to The Garrison Standard, which means a written price before any work begins, background-checked and uniformed technicians on site, and a written guarantee on every repair good for a full year. That guarantee is the 365-Day Done Right Promise. If a repair fails inside that window, the second visit is free. No argument, no re-invoice.
Lonnie Burke, who leads our crews, has walked enough Rohnert Park driveways to know what the original tract construction leaves behind: undersized post footings, gate lines that pool water in winter, and operator logic boards that get replaced when the real problem is in the ground. Our team answers the phone live, 24 hours a day, every day of the year. Not a voicemail box. A person.
On a 1970s ranch-style driveway in the Country Club area near Rohnert Park Expressway, our crew diagnosed a swing gate that dragged on the apron and tripped its obstruction sensor mid-travel. We pulled the original hinge post, found the footing cracked and undersized, poured a deeper footing, reset the post, corrected the sag, and replaced the control board and safety photocells on the LiftMaster arm operator. The homeowner told us two prior technicians had adjusted the panel without ever touching the post. The gate now opens fully and the reversal test passes on the first try.
Driveway Gate Repair in Rohnert Park
Driveway Gate Repair in Rohnert Park usually means one of three things: the gate has sagged and started scraping the apron, the operator motor runs but the gate barely moves, or the safety sensors have failed and the gate reverses for no visible reason. Each has a different fix, and most of them are less expensive than a full replacement. A hinge post reset runs $250 to $450. Sensor and limit switch repairs run $180 to $320. A worn swing arm operator replacement runs $700 to $1,200 installed.
Fixing a Gate That Drags the Concrete
When the gate leaf drops and the latch side scrapes the driveway, the operator usually gets blamed. The cause is often the hinge post leaning in a footing that was poured too shallow forty or fifty years ago. We reset that post into a deeper concrete pour, re-level the gate, and confirm the operator no longer fights the load.
Repairing Automatic Openers
Automatic gate failure is commonly a failed limit switch, a corroded control board connector, or a dead capacitor in the motor. We bench-test the board before replacing it, because a burned motor on a good board is a wasted $400 part. Written price first, every time.
Gate Welding in Rohnert Park
Gate Welding in Rohnert Park covers cracked hinge welds on steel driveway gates, broken pickets on ornamental gates along the M Section and Executive Homes neighborhoods, and frame repairs where a sagging gate has been repeatedly forced. Most touch-up and repair welding runs $150 to $350 per section, while a bent frame that needs straightening and re-welding runs $400 to $800. We weld on site so the gate never leaves the property.
Steel Frame and Picket Repair
Rohnert Park’s older tract homes have a lot of square-tube steel gates with light factory welds. Moisture from flat-lot drainage gets into the tube at the bottom rail, rusts it from the inside, and the picket welds crack over time with daily use. We cut out the rusted section, weld in new steel, and grind the repair flush before primer.
Rusted Hinge and Latch Replacement
A broken weld at the hinge barrel or latch plate is a safety issue that also ruins the gate’s travel. We remove the old hardware, weld in a replacement bracket, and set the latch position so the opener’s close-limit engages cleanly. The whole job is usually done the same day.
Trusted Brands We Service in Rohnert Park
Our technicians work on FAAC, BFT, Linear, and Viking equipment, along with LiftMaster, DoorKing, and the other major operator brands common in Rohnert Park garages and gate posts. We carry the most-requested boards, sensors, and remotes for these systems in a local parts stock, so a repaired Linear swing actuator or a FAAC photobeam set doesn’t wait on a two-week ship notice. When a BFT board is discontinued, we source a compatible substitute and configure it before we leave the driveway.
Common Gate Repair Problems We See in Rohnert Park Homes
- Cracked, undersized original footings. Rohnert Park’s tract homes from the late 1960s through the 1980s often have hinge posts set in shallow concrete. The post leans, the gate drags the apron, and the operator’s obstruction sensor trips mid-travel.
- Flat-lot winter drainage pooling at the gate line. Water sits at the base of the post and the slide operator during the wet months. Loop detector wire rusts, operators short, and hinge steel corrodes from the inside out.
- Failed safety photocells on older LiftMaster and Linear operators. A faded or misaligned beam fails the UL 325 entrapment reversal test. The gate then reverses without a cause, or worse, does not reverse when it should.
- Dead keypad entry systems. Exposure to Sonoma County’s wet winters kills the membrane and corrodes the terminals on older keypads. The operator is fine; the access point is not.
Pricing for Gate Repair in Rohnert Park, CA
Gate repair in Rohnert Park usually falls into a few clear bands. Sensor, limit switch, keypad, and hinge repairs run $180 to $340. Welding a cracked frame or replacing rusted hinge hardware runs $150 to $350 per section. A full swing or slide operator replacement, including new arm, board, and safety retest, runs $850 to $1,800 depending on brand and travel length. If the post footing has failed and needs a new pour, add $200 to $450. Every customer receives a written price before any work starts, and that price does not move at the door. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Rohnert Park
Our crews cover the neighboring areas around Rohnert Park regularly, including Cotati, Petaluma, Santa Rosa, and Sebastopol. The same written pricing, the same guarantee, and the same background-checked technicians apply in every one of those cities. If your gate is failing and you’re just outside Rohnert Park’s limits, call and we will route the nearest uniformed technician to you.
Serving Rohnert Park, CA – Our Local Coverage Area
We’re based in the Rohnert Park area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Rohnert Park
In most Rohnert Park homes built between the late 1960s and the 1980s, the answer is the post. The original hinge posts were often set in shallow, narrow concrete footings that crack under decades of weight and wet-dry cycles. The gate leaf drops, the latch side drags the apron, and the operator fights the added load. Fixing it means pulling the post, pouring a deeper footing, resetting it plumb, and re-hanging the gate. Call (469) 530-2485 and we will give you a written answer and a price on site.
Rarely. On Rohnert Park’s flat, low-lying lots, the original footings are often cracked or undersized for a modern slide gate operator. Reusing a bad footing is how you get a gate that binds in winter and trips its obstruction sensor the week after installation. If the existing footing is sound and the right size, we use it. If it is not, we pour a new one and add that to the written quote before any work starts.
Yes, and Sonoma County’s sun load is enough to run most FAAC, BFT, and LiftMaster solar-compatible operators through the wet months if the panel is sized correctly. A solar conversion includes the operator, battery bank, panel, and full UL 325 safety edge and photocell check. The realistic installed range is $1,200 to $1,900. We will give you a written price and test the reversal before we leave.
We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators in Rohnert Park. That matters because a Linear swing actuator has different limit settings and board logic than a FAAC hydraulic operator, and guessing creates repeat failures. Our technicians are trained on each brand, not just one. Call (469) 530-2485 and tell us the brand on the operator box.
Most standard automatic driveway gate installations take two to four working days in Rohnert Park. Day one is footing excavation and concrete pour. Day two or three is gate framing, operator mounting, and power run. The final day covers safety edge alignment, photocell positioning, UL 325 reversal testing, and controller configuration. We do not promise a same-day install. We quote a schedule, put it in writing, and keep it. Call (469) 530-2485 to have a technician measure your driveway and give you a written timeline and price.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Rohnert Park and the surrounding Sonoma County communities.