Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Sacramento
Gate repair in Sacramento usually means one of two things: a gate that won’t open, or a gate that won’t stay put. Most repairs we handle in Sacramento run between $185 and $650, and we can typically get a technician to your property the same day or next morning. Wrought iron and steel gates across Land Park, East Sacramento, Natomas, and Arden-Arcade face a specific set of problems tied to our clay soils and dry summers. If your gate is dragging, sagging, or refusing to respond to the remote, call us at (469) 530-2485 and we’ll give you a straight answer and a written price before any work starts.
Why Carver Gate Repair Is the Gate Repair Team Sacramento Homeowners Call
We’re a gate-only contractor, not a generalist handyman service that happens to hang gates. That focus matters in Sacramento, where a 14-foot iron gate on adobe clay behaves differently than the same gate on Bay Area loam or foothill granite. Our technicians work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment, so the diagnostic step isn’t a guessing game. We carry the common boards, limit switches, receivers, and hinges for those brands on our trucks, which means fewer second trips.
Every Sacramento job starts with a written price delivered before we touch a tool. Every repair carries a written one-year guarantee, the 365-Day Done Right Promise. If the repair fails inside that year, we come back and fix it at no charge. No argument, no invoice. Our technicians are background-checked and uniformed, and dispatch is coordinated from our Sacramento office. When you call (469) 530-2485, a live person answers, 24 hours a day, every day of the year.
We understand the frustration Sacramento homeowners feel after a no-show technician or a quote that grows at the door. That’s why we run on The Garrison Standard: written prices, verified people, and a guarantee that’s in writing. Lonnie Burke leads our team, and the standard is the same on every job, from a small latch repair in Rio Linda to a full operator replacement in Carmichael.
Wrought Iron Gate Repair in Sacramento
Wrought iron gate repair in Sacramento is our most requested service, and the first thing we check is not the gate itself but the posts holding it. A 12- or 14-foot iron gate is heavy, and when the post shifts even a quarter inch, the gate starts to drag, bind, or lean. Straightening a sagging double iron gate and re-setting posts in Sacramento typically runs $350 to $800, depending on how much excavation and re-footing the soil requires. Replacing bent iron pickets or a rusted bottom rail usually falls between $220 and $450.
Post Re-Set and Sag Correction
Sacramento’s clay soil expands in winter and shrinks in summer, which slowly works gate posts out of plumb. We dig out the old footing, re-set the post in a deeper concrete pour, and re-level the gate so the hinges don’t fight gravity. This is not a job to skip, because an out-of-level gate destroys the operator.
Iron Pickets, Rails, and Rust Repair
Rust on the bottom rail is typical in Sacramento, especially on gates near sprinkler overspray or shade. We cut out and weld in matching steel, sand and prime the repaired section, and finish it so it doesn’t stand out. The repair holds and looks intentional, not patched.
Metal Gate Repair in Sacramento
Metal gate repair in Sacramento covers steel, aluminum, and ornamental iron gates, and most of the problems come down to hinges, welds, and posts rather than the gate panel itself. A broken hinge weld or a torn post bracket typically costs $180 to $380. Replacing a caster wheel or bottom track roller on a slide gate runs $150 to $300. If the gate frame is bowed or the post has heave damage, the job moves into post re-setting and realignment, which lands in the $300 to $700 range.
Weld and Frame Repair
We repair snapped hinge welds, cracked top rails, and torn brackets with proper MIG welding and matched steel, then grind and finish the joint. We see a lot of gates in Elk Grove and North Natomas where a previous weld failed because it was done thin and fast. We redo those correctly.
Hinge and Bracket Replacement
Heavy gates need hinges that are sized for the load. We replace undersized hardware with heavier barrel hinges or replaceable bearing hinges and align the gate so it swings without drag. On a steel frame gate, this usually takes one to two hours on site.
Trusted Brands We Service in Sacramento
We work on nine gate motor systems, and the ones we see most often in Sacramento are LiftMaster, DoorKing, Linear, and Ghost Controls. The older residential neighborhoods, Think East Sacramento and Curtis Park, have a lot of LiftMaster and Linear swing operators. Hobby farms and acreage lots around Rio Linda and North Highlands lean on Ghost Controls and Viking slide operators. We stock boards, remotes, limit switches, and safety sensors for these brands locally, so we’re not waiting on a parts shipment from a distributor before we can finish your repair.
Common Gate Repair Problems We See in Sacramento Homes
- Post-footing failure from expansive clay soil. Sacramento’s wet winters and hot, dry summers make the San Joaquin and Sacramento Valley adobe clay shrink and swell, which heaves and settles gate posts. The gate then sags, drags, or binds against the ground, often before the operator shows any strain.
- Operator strain from an out-of-level gate. When a swing gate sags from post movement, the operator’s motor works harder on every cycle. That shortens the life of the capacitor, strips the gear, and eventually burns out the motor, even though the operator itself may have been fine.
- Safety photocell and edge sensor failures. Shifting posts knock safety beams out of alignment and damage edge sensors. Homeowners may not notice their automatic gate is no longer compliant with UL 325 entrapment protection, which is a serious safety concern for anyone near the gate.
- Limit switch failures on slide gates. On rack-and-pinion slide gates, we regularly replace limit switches that have been knocked out of position or burned out. The gate then slams at the end of travel or stops halfway, and the fix is usually a new limit assembly plus a track alignment.
In Land Park, we recently repaired a 14-foot wrought iron swing gate that had started dragging and sticking after a wet winter. The homeowner thought the gate operator was failing, but we found the hinge post had shifted due to soil movement. We re-set the hinge post with a deeper concrete footing, corrected the sag, and re-leveled the gate. We also added a safety photocell and tested the LiftMaster operator’s reversal to meet UL 325 entrapment protection. That’s the kind of Sacramento job we do every week.
Pricing for Gate Repair in Sacramento, CA
A service call and diagnostic in Sacramento runs $89, and that amount is credited toward the repair if you approve the work. Typical repairs fall into these ranges: hinge weld and bracket repair $180 to $380, post re-set and gate realignment $300 to $800, limit switch replacement $145 to $280, safety photocell or edge sensor replacement $160 to $350, and full operator replacement $650 to $1,600 depending on the motor and arm style. You get a written price before any work begins, and that number does not move at the door. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Sacramento
Our Sacramento crews also cover the surrounding communities, including West Sacramento, Rio Linda, North Highlands, and Carmichael. Each of those areas has its own mix of soil conditions and gate styles, from slide gates on rural lots to tight iron gates on older city lots. If you’re outside Sacramento proper, call and ask about your area.
Carver Gate Repair is part of the gate repair team serving the greater Sacramento region, working to The Garrison Standard on every job.
Serving Sacramento, CA – Our Local Coverage Area
We’re based in the Sacramento area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Sacramento
Yes. A gate that does not reverse on contact or break a beam is out of compliance with UL 325 entrapment protection, which is a safety standard, not a convenience feature. The usual culprits are a misaligned photocell, a damaged edge sensor, or a failed control board input. Call (469) 530-2485 and we can test the full safety circuit and give you a written repair price.
Sacramento’s clay soil absorbs winter rain, swells, and then shrinks in the summer heat, which moves gate posts a little more each year. The post footing cracks or shifts, and the gate sags or drags. Re-setting the post in a deeper concrete footing is the permanent fix, and it’s a repair we do frequently across Land Park, East Sacramento, and Natomas.
Yes. We repair and service both swing and slide gates across Sacramento, including single and double swing gates, cantilever slide gates, and track-style slide gates. We also repair the operators, safety devices, and loop detectors on both styles. A written estimate is free and the price is agreed before work starts.
Yes. Solar charging works well in Sacramento’s climate, which gets a consistent number of clear days throughout the year. We can install a solar-powered opener on a new or existing gate, and we’ll run the charging calculation based on your gate’s size and cycles per day. Solar installations require a site measure and a written quote, and we do not rush same-day installs.
Most common repairs, such as hinge replacement, limit switch replacement, or safety sensor repair, take one to two hours on site. Post re-sets and full operator replacements usually run half a day because they include digging, setting, alignment, and safety testing. We’ll give you a time window when you call (469) 530-2485, and the written price is fixed before we start.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Sacramento and the surrounding communities.