Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Schertz
Gate repair in Schertz usually means one of two things: a swing gate that’s started dragging on the hinge side, or a slide gate that grinds halfway and stops. Both are fixable, often the same day we get the call. Our crews know Schertz streets well, from the older lots along FM 78 to the new subdivisions east of I-35, and we carry parts for nine gate-motor brands so our Gate Motor Repair in Schertz doesn’t wait on shipping. Call us at (469) 530-2485 and a live person answers, day or night. You’ll get a written price before any work begins, not an estimate that moves once the gate’s open.
Why Carver Gate Repair Is Schertz’s Preferred Gate Repair Company
Schertz homeowners ask for the same things: a technician who shows up when promised, a price that holds, and a repair that doesn’t need redoing in three months. That’s the Garrison Standard we’ve operated under since 2008. Every technician dispatched in Schertz is background-checked and uniformed, so you know who’s coming through the gate before they arrive. The phones are answered by a person around the clock, weekends included.
Reviews from Schertz customers mention the same pattern: the tech diagnosed the actual problem, wrote the price down, and the gate worked when he left. We don’t ask you to take that on faith. Every repair carries a written 365-Day Done Right Promise. If the repair fails inside that year, we return and fix it again at no charge. That’s not a courtesy call process with fine print. It’s one sentence in the work order, and it means what it says.
Iron Gate Repair in Schertz
Iron gate repair in Schertz starts with the post, not the pickets. Wrought-iron and steel gates here sit on expansive clay that swells when wet and shrinks when dry. Over a few wet-dry seasons, the hinge post shifts, the leaf drops, and the gate starts scraping the drive or the latch stops lining up. We see this more than any operator fault in Schertz, especially on the FM 3009 corridor and around the newer homes near Wiederstein Road. Repairing the leaf without resetting the post means redoing the work next year.
Post Reset and Re-Hang
When a hinge post has settled, we pull it, re-set the footing at proper depth, and re-hang the leaf so it swings plumb. The panel itself is usually fine. The problem is below grade. A proper re-hang in Schertz runs $450 to $850 depending on footing size, weld work, and whether the post needs to be sleeved or replaced outright.
Weld and Rust Repair
Schertz’s heat and occasional freeze cycles open hairline cracks in older iron gate frames, and rust advances fastest at the bottom rail where irrigation water and splashback collect. We grind out the rot, weld in new steel, and re-coat the repair so it doesn’t fail at the same joint in a year. Basic weld repair on an iron gate here runs $225 to $500, with rust remediation on larger panels a separate line item.
Sliding Gate Repair in Schertz
Sliding gate repair in Schertz usually involves the track, the rollers, or the operator’s limit switch. The flat lots east of I-35 and the ranch-style properties along Schwab Road favor slide gates, and they take abuse from heat, dust, and the occasional kid riding the gate as it opens. The symptom is predictable: the gate halts mid-run, reverses, or grinds before the motor gives out.
Track and Roller Replacement
When rollers wear flat or the track gets bent by a mower or delivery truck, the gate fights the operator every cycle. We replace worn rollers, true the track, and set the gate weight back on its wheels rather than letting the motor drag it. A full roller and track service in Schertz typically runs $350 to $700, depending on gate weight and track condition.
Limit Switch and Entrapment Fault Clearing
Slide operators use limit switches to know when to stop. Heat and dust in Schertz get into those switches and the loop detector wiring, so the gate over-travels or faults out. We replace the switch, clean the contacts, and re-test the entrapment reversal per UL 325 standards before we call the job done. Limit-switch replacement runs $180 to $320 on most Schertz properties.
Trusted Brands We Service in Schertz
Our technicians train on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. That covers most automatic gates in Schertz without waiting on a specialist. We keep common Viking and Ghost Controls boards and remotes stocked in local vehicles, and DoorKing and Elite swing and slide parts are sourced from nearby suppliers when a job needs something uncommon. The point is shorter turnaround for Schertz customers who don’t want their driveway blocked for a week over a $40 limit switch.
Common Gate Repair Problems We See in Schertz Homes
- Hinge-post settlement on expansive clay. The soil under the footing shrinks and swells with rainfall, and the post heaves or tilts. The gate leaf drops, drags, and eventually faults the operator, even though the motor itself is fine.
- Control-board failures from heat and dust. Slide operators mounted with surface boxes facing all-day sun run their boards hotter than the manufacturer intended. The caps dry out earlier, and the loop detector connections corrode from fine dust and condensation.
- Binding on newer subdivision gates. Homeowners east of I-35 and around Cibolo Valley area sometimes get gates set by fencing crews who didn’t check footer depth. Within a year or two the posts torque unevenly and the gate binds mid-swing.
- Entrapment faults that trip every cycle. A dragging gate triggers UL 325 entrapment protection, and the operator reverses as a safety response. The board usually isn’t broken. The gate’s fighting a mechanical problem the operator is correctly shutting down for.
Pricing for Gate Repair in Schertz, TX
A typical gate repair in Schertz runs $180 to $500 for common jobs like limit switches, hinge adjustments, and roller replacement. Post resets and weld work run higher, $350 to $850, because they take longer and require heavier equipment. Full operator replacement, when needed, lands between $900 and $1,800 depending on the motor and arm type. What moves the number most is what’s actually wrong: a misaligned hinge is cheap to fix, a settled post is not. You’ll have a written price before any work starts, with the labor, parts, and any disposal listed as separate lines. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Schertz
From our Gate Repair in Schertz service area, we handle calls in Gate Repair for neighbors in Universal City, Cibolo, Converse, and New Braunfels. If you’re just outside those city lines, call us. The dispatch team will tell you straight whether we can get a technician to your address.
Serving Schertz, TX – Our Local Coverage Area
We’re based in the Schertz area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Schertz
The hinge post is settling in Schertz’s expansive clay soil. The leaf drops and scrapes the ground or the latch post, and the motor keeps pushing against that added friction until it eventually trips its entrapment fault. We fix the post first, then check the operator. Call (469) 530-2485 and we’ll send someone to look at the footing, not just the panel.
Yes. Any automatic gate operator installed or repaired in Schertz must be tested for entrapment reversal per UL 325 standards after the work is done. That includes the primary and secondary entrapment devices like photocells, edges, or reverse sensors. We test these as part of every repair that touches the operator, not as an extra charge.
We can, but the repair often includes correcting the track and roller setup, not just replacing a motor or a board. A sloped drive changes the gate’s weight distribution and wears the track unevenly, especially in the clay-heavy lots on the north and west sides of Schertz. We re-level the track and set the gate so the operator stops fighting gravity. Call (469) 530-2485 for a written quote on your specific slope.
LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers the large majority of operators installed across Schertz and the surrounding San Antonio area, so we usually have the repair parts on the truck or at a nearby supplier, not on a two-week backorder.
A typical repair in Schertz is done in two to four hours on site. A full installation, meaning new posts, footings, wiring, and operator mounting, takes a couple of days and is scheduled, not dispatched same-day. We never rush an install, because dropping footer concrete before it’s cured or skipping a reversal test means the gate fails inside a year. Call (469) 530-2485 and we’ll give you a realistic timeline for your specific job.
Call Carver Gate Repair for Service in Schertz
If your gate is down, dragging, or faulting out, call (469) 530-2485. A live person answers, day or night. You’ll get a background-checked, uniformed technician from our Gate Repair team who arrives with a written price before any work starts, and every repair is covered by our 365-Day Done Right Promise. For Schertz homeowners, that means the gate works when we leave, and if it doesn’t stay working, we come back at no charge. Dispatch and scheduling for Schertz are coordinated from our San Antonio office, and crews serve Schertz locally.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Schertz, TX to The Garrison Standard since 2008.