Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across Shady Hollow
A stuck gate at 7 a.m. turns your whole morning sideways. In Shady Hollow, where winding roads like Shady Hollow Drive and the hilly terrain off Brodie Lane can make a broken gate feel like you’re trapped on your own property, that frustration runs deep. Our Gate Repair crews work out of our Austin coordination office and reach Shady Hollow homes fast, with trucks stocked for the nine motor brands we service and the specific hardware these hillside installations demand.
Call (469) 530-2485 any time. A live person answers, 24 hours a day, including holidays. We’ll give you a written price before any work starts, and every repair carries our 365-Day Done Right Promise.
Why Carver Gate Repair Is Shady Hollow’s Preferred Gate Repair Company
We’ve worked on gates along the slopes near Slaughter Creek and in the older sections off MoPac where the original posts have settled over decades. That geography matters. Shady Hollow’s limestone-heavy soil and seasonal clay expansion stress gate posts differently than flatland installations, and our technicians account for that when they diagnose sagging or binding.
Shady Hollow homeowners have left us reviews mentioning specifically that we showed up in the arrival window, wore clean uniforms, and left the work site swept. We don’t take that lightly. It’s The Garrison Standard we’ve operated under since 2008, and it applies to every dispatch from our Austin office.
Response time to Shady Hollow typically runs under 90 minutes during business hours, and our emergency line puts you through to a live person who can dispatch a crew, not a call-back queue that lands you in voicemail. Lonnie Burke built this operation on the principle that a gate repair company should function like a utility, not a gamble.
Metal Gate Repair in Shady Hollow
Metal Gate Repair in Shady Hollow covers everything from rusted wrought-iron driveway gates off Manchaca Road to aluminum pool gates that have taken a hit from shifting Hill Country limestone. A typical metal gate repair in Shady Hollow runs $280 – $520, with welding and rust remediation at the higher end and hinge replacement or latch adjustment toward the lower.
Weld Repair and Rust Stabilization
Shady Hollow’s humidity spikes in spring and the occasional hard freeze in winter open cracks in paint that let moisture reach the steel. We grind to clean metal, weld structural cracks with 7018 rod for strength, then prime and paint to match. If the rust has perforated the tube, we’ll tell you straight whether a section replacement makes more sense than chasing rot.
Hinge and Post Restoration
Metal gates on Shady Hollow’s sloped lots carry uneven loads. We replace worn ball-bearing hinges with greaseable cast units and, when the post itself has loosened in that shifting clay-limestone mix, we pour new concrete collars or drive deeper footing tubes. The goal is a gate that swings true for years, not months.
Wood Gate Repair in Shady Hollow
Wood Gate Repair in Shady Hollow addresses the cedar and treated-pine gates common in the area’s 1980s and 1990s construction, plus newer redwood installations in the infill neighborhoods. Typical wood gate repair in Shady Hollow runs $240 – $480, with panel replacement, post resetting, and hardware upgrade each affecting where you land in that range.
Panel and Picket Replacement
Cedar weathers hard in direct Texas sun, and the shaded sections near Shady Hollow’s mature oak canopy stay damp enough to invite rot. We match existing profiles when possible, use stainless fasteners to prevent bleed stains, and seal all six sides of replacement boards before installation. A gate that looks patched in March shouldn’t scream “repair” by August.
Frame Rebracing and Post Resetting
Wood gate frames rack when diagonal bracing fails or posts lean. We sister new pressure-treated 4x4s to weakened posts, pour concrete footings below frost line, and install adjustable steel tension cables on wide double gates. For the split-rail styles still found on some Shady Hollow acreage, we peg mortise joints with white oak dowels that outlast the originals.
Trusted Brands We Service in Shady Hollow
Our trucks carry parts for LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. That range matters in Shady Hollow, where a home off Shady Hollow Drive might run a decade-old FAAC hydraulic swing arm while a newer build near the creek uses a Linear slide operator on a steep driveway. We don’t order parts after we arrive. Our Austin warehouse stocks limit switches, loop detectors, control boards, and articulating arm kits for these nine brands, so most Shady Hollow repairs finish in one visit. If your operator needs replacement, we’ll quote the full installed price in writing before touching a bolt.
Common Gate Repair Problems We See in Shady Hollow Homes
- Limestone heave binding slide gates. Shady Hollow’s thin topsoil over Edwards Plateau limestone shifts with moisture changes. Slide gates on ground tracks grind when that stone pushes up. We reset tracks on adjustable pedestals or convert to cantilever systems where grade movement is chronic.
- UV-degraded safety loops. The direct afternoon sun on west-facing Shady Hollow driveways cooks the insulation on buried loop wire. We replace with high-temp rated cable and seal splices in epoxy-filled enclosures.
- Oak root intrusion on post footings. Mature live oaks in Shady Hollow’s established neighborhoods send roots toward the moisture and nutrients concentrated around concrete post bases. Roots lift posts or split footings; we relocate posts outside the drip line and use deeper, narrower piers.
- Corroded chain on older swing operators. Humidity from Slaughter Creek drainage and the shade canopy accelerate chain and sprocket wear on exposed drive systems. We upgrade to sealed belt drives where the operator frame allows, or specify stainless chain with regular maintenance intervals.
Pricing for Gate Repair in Shady Hollow, TX
| Service | Typical Range in Shady Hollow |
|---|---|
| Basic hinge/latch adjustment | $180 – $260 |
| Post resetting (single) | $320 – $480 |
| Operator diagnostic and repair | $240 – $440 |
| Full operator replacement (installed) | $1,400 – $2,800 |
| Weld repair with rust remediation | $340 – $580 |
| Wood panel/picket replacement | $220 – $400 |
These ranges reflect what we quote and agree to in writing before work starts. The final price depends on gate size, material thickness, access for our welding rig or post-puller, and whether the operator needs a simple control board or full replacement. Every Shady Hollow estimate is free, delivered on-site, and fixed once you approve it. The number does not move at the door. For Gate Installation in Shady Hollow or Gate Motor Repair in Shady Hollow, we follow the same written-price protocol.
We Also Serve Cities Near Shady Hollow
Our Austin-based dispatch coordinates crews throughout the metro and beyond. We handle Gate Repair in Shady Hollow as our core local focus, with regular runs to Houston, San Antonio, Dallas, and Fort Worth for larger commercial installations and property-management accounts. Shady Hollow homeowners get priority routing for residential calls.
Serving Shady Hollow, TX – Our Local Coverage Area
We’re based in the Shady Hollow area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Shady Hollow
We typically dispatch to Shady Hollow within 90 minutes during standard hours, and our 24/7 emergency line connects you to a live person who can route a crew immediately for security or safety situations. Call (469) 530-2485 and we’ll give you a real arrival window, not a four-hour guess.
Yes, we service every Shady Hollow neighborhood from the original 1980s sections off Shady Hollow Drive to the newer builds near Slaughter Creek and the winding roads off Brodie Lane. Our trucks carry the equipment for steep-driveway access and uneven grade work that flatland crews often lack.
Yes, our phones are staffed by a live person 24 hours a day, every day of the year, including holidays. If your gate is stuck open and you need security, or stuck closed and you’re trapped, we’ll get a technician to your Shady Hollow property with the same written-price guarantee we offer on scheduled calls.
Shady Hollow pricing sits in the middle of our Texas metro ranges, slightly below Dallas and comparable to Austin proper. The limestone terrain here can add labor on post-setting jobs, but our local familiarity keeps us efficient. We’ll quote your exact price free before any work starts, so you know precisely where you stand.
Every repair carries our 365-Day Done Right Promise in writing. If the same problem returns within a full year from the service date, we come back free, no argument, no re-diagnostic fee. That guarantee is the same in Shady Hollow as in every market we serve under The Garrison Standard.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Shady Hollow since 2008 under The Garrison Standard. Call (469) 530-2485 for a free estimate.





Before
After
Before
After
Before
After