Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Repair Across South Houston
Gate repair in South Houston typically runs $180 – $650 depending on the damage, and most repairs are completed in a single visit with parts stocked for nine major brands. Our crews dispatch from the Houston office and carry the common failure items we see fail fastest in this market: rust-pitted hinges from the Gulf humidity, loop detectors scrambled by street flooding near Spencer Highway, and swing operator arms fatigued by the constant thermal cycling South Houston gates endure.
We’re familiar with the housing stock here, from the mid-century ranches off Texas Avenue to the newer builds closer to the Beltway. Gates in South Houston take a beating that inland properties don’t. The salt air pushes in from Galveston Bay, the summer humidity hangs at 80% for weeks straight, and the clay soils shift enough to throw posts out of plumb inside a single season. That local knowledge changes what we stock on the truck and how we diagnose a problem when we arrive. If your gate is dragging, stuck, or dead, call (469) 530-2485. A live person answers, and we’ll give you a written price before any work starts.
Why Carver Gate Repair Is South Houston’s Preferred Gate Repair Company
Our Gate Repair team has built its reputation in South Houston on showing up when promised and leaving with the job actually finished. Homeowners here don’t have patience for another no-show contractor, not when a broken gate means leaving a vehicle exposed overnight on Avenue A or backing out blind onto a busy street.
We answer the phone with a live person 24 hours a day. No voicemail, no callback queue, no “we’ll get to you Monday.” That matters in South Houston, where a gate that won’t close on a Friday evening can mean a long weekend of worry.
Every technician we send is background-checked, uniformed, and trained to The Garrison Standard. You’ll know who is on your property, and they’ll know your gate system before they step out of the truck. Our 365-Day Done Right Promise covers every repair in writing. If it fails inside that year, we come back free. No argument, no invoice.
We also know the local terrain. Crews working Gate Repair in South Houston regularly deal with the low-lying drainage issues near the Sims Bayou watershed, where water intrusion kills underground loop detectors faster than almost anywhere else in the metro. That experience saves diagnostic time and saves you money on parts you don’t need.
Iron Gate Repair in South Houston
Iron Gate Repair in South Houston addresses the specific corrosion and fatigue patterns that wrought iron and steel gates develop in this coastal-influenced climate. The combination of Gulf moisture, occasional salt spray, and the industrial particulates from the Houston Ship Channel corridor accelerates rust at weld points and along lower rails faster than homeowners expect. A typical iron gate repair in South Houston runs $220 – $480 for hinge replacement and rust remediation, or $340 – $650 if structural welding and post resetting are required.
Rust Damage at Hinges and Pickets
We see this most often on gates installed before 2010, when powder coating standards were thinner and South Houston’s air carried more unfiltered refinery particulate. The rust starts at the hinge barrel or where the picket meets the lower rail, then spreads behind the paint where you can’t spot it. We cut out the compromised metal, weld in matching stock, and refinish with a two-part epoxy primer that holds up to local conditions better than standard spray coatings.
Weld Repair and Structural Reinforcement
When a gate has sagged enough to drag concrete, the frame has usually cracked at a stress concentration point. We don’t just weld over the crack. We sleeve the joint, redistribute the load, and check the post footing for the soil shift that caused the failure in the first place. Otherwise you’re repairing the same break twice.
Sliding Gate Repair in South Houston
Sliding Gate Repair in South Houston focuses on the track, roller, and drive systems that move gates along fence lines common to narrower lots near College Avenue and the older subdivisions off Allen Genoa Road. These gates save space but accumulate debris in the track, and the constant vibration loosens chain tension and wears v-groove wheels unevenly. Typical sliding gate repair in South Houston costs $180 – $420 for track cleaning, roller replacement, and chain adjustment; motor or operator replacement pushes the range to $480 – $1,200 depending on brand and access.
Track Obstruction and Wheel Wear
Live oak debris, the fine gravel used on local driveways, and the mud that washes in during heavy rains all find their way into sliding gate tracks. We strip and clean the track, replace pitted v-groove wheels with sealed-bearing units rated for outdoor exposure, and set the proper clearance so the gate doesn’t bind when the frame inevitably shifts with seasonal moisture changes.
Chain Drive and Limit Switch Calibration
A sliding gate that stops short or overruns its stop is usually a limit switch issue, not a motor failure. We test the opener’s travel limits, recalibrate the encoder or mechanical stops, and verify the safety reverse function. If the chain has stretched beyond adjustment, we replace it and check the sprocket for wear that would ruin the new chain in months.
Trusted Brands We Service in South Houston
Our trucks carry parts and diagnostic tools for nine gate motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In South Houston, we see a lot of Linear and Viking operators on residential slide gates, and Ghost Controls units on the lighter swing gates popular in the newer developments. We also stock DoorKing control boards and loop detectors, because the commercial properties along Spencer Highway and the industrial parcels near the rail corridor run heavy-duty systems that can’t wait for a parts order from Dallas. Having the right component on hand means most South Houston repairs finish same-day, and our technicians are trained to the factory standards for each brand, not just general electrical work.
Common Gate Repair Problems We See in South Houston Homes
- Loop detector failure after street flooding. The low elevation near Sims Bayou and the poor drainage on some streets off Texas Avenue means water regularly covers the pavement cut where the induction loop lives. Once water intrudes past the seal, the detector board throws constant faults or misses vehicles entirely.
- Hinge seizure from salt-air corrosion. Gates within a few miles of the Ship Channel get a double dose: Gulf humidity plus airborne chlorides and sulfides. Hinge pins gall inside the barrel, and the gate starts to drag or bang. We replace with stainless or zinc-coated hardware and grease with a marine-grade compound.
- Post lean from expansive clay soils. South Houston sits on the same gumbo clay that plagues foundation repair companies across the metro. A gate post set without proper depth or drainage tilts as the soil swells and shrinks, throwing the gate out of alignment and stressing the operator.
- Operator arm fatigue from thermal cycling. Summer days hit 95°F, nights drop to 75°F, and the metal expansion joints in articulating arms work themselves loose over a few seasons. We see this on older FAAC and Mighty Mule units especially, and we check the pivot bushings, not just the arm itself.
Pricing for Gate Repair in South Houston, TX
We publish actual ranges because homeowners in South Houston have already dealt with contractors who quote low and invoice high. Here’s what gate repair costs here:
| Service | Typical Range in South Houston |
|---|---|
| Hinge replacement / adjustment | $180 – $290 |
| Post reset and realignment | $260 – $420 |
| Electric / automatic gate diagnostic & minor repair | $180 – $340 |
| Gate motor / operator repair | $280 – $480 |
| Gate motor / operator replacement | $680 – $1,200 |
| Weld repair and rust remediation (iron gates) | $220 – $650 |
| Access control / keypad repair or replacement | $180 – $380 |
What moves the number: brand and age of the operator, whether the post footing has failed, how far rust has spread before you call, and whether we need to pull a permit for electrical work. We don’t guess at your price over the phone for complex jobs, but we do give you a written, itemized price after inspection and before any work begins. That price doesn’t change once we start. Estimates are free, and there’s no charge for the diagnostic if you decline the repair.
If your system is beyond repair, we also handle Gate Installation in South Houston and can quote replacement against repair so you have both numbers.
We Also Serve Cities Near South Houston
Our crews work throughout the southeast Houston metro. We regularly handle gate repair in Pasadena, Galena Park, Deer Park, and Pearland, with the same live-answer phone, same written pricing, and same 365-Day Done Right Promise. Dispatch is coordinated from our Houston office, but the technician who arrives knows your neighborhood’s soil conditions, typical gate hardware, and local code requirements. If you’re searching for South Houston gate repair but live just outside the city limits, call anyway. We likely already work on your street.
Serving South Houston, TX – Our Local Coverage Area
We’re based in the South Houston area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in South Houston
Most South Houston calls are scheduled same-day or next-day depending on when you call and parts availability. Emergency calls for gates stuck open or vehicles trapped inside get priority dispatch from our Houston office. Call (469) 530-2485 and a live person will give you the next available window.
Yes, we work from the older sections near Texas Avenue and College Avenue out to the Beltway 8 corridor and the industrial parcels along Spencer Highway. If your address shows South Houston, we’re coming. We also handle Gate Motor Repair in South Houston for the commercial and multi-family properties in the same zone.
Yes. Our phones are staffed by a live person 24 hours a day, every day of the year, including weekends and holidays. A gate that won’t close on a Saturday night in South Houston gets the same response as a Tuesday morning call. After-hours labor rates apply, and you’ll know that rate before we dispatch.
Not because of location. Our pricing is consistent across the metro. What can push South Houston repair costs higher is the local conditions: salt-air corrosion that has progressed further before detection, clay soil post failures that need more extensive resetting, and water-damaged loop detectors that require trenching and re-paving. We diagnose on site and give you the actual price, not a zone surcharge.
Every repair carries our 365-Day Done Right Promise in writing. If the same component or the same failure recurs within one year of service, we return and fix it free. No service fee, no parts charge, no argument. That guarantee is standard on every Carver job, including all South Houston repairs. Call (469) 530-2485 for an exact quote on your gate.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving South Houston with The Garrison Standard since 2008.





Before
After
Before
After
Before
After