Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Texas City
Gate repair in Texas City usually falls into one of three jobs: a gate that sags and won’t latch, a motor that hums but won’t move the gate, or a keypad and control board that quit after salt air off Galveston Bay ate through the connections. Most repairs run $220 to $540, and we can typically get a technician to a Texas City address the same day you call. If your gate is stuck open, stuck shut, or making a grinding noise every time it cycles, call us at (469) 530-2485. We answer the phone around the clock with a live person, not a voicemail tree.
We know Texas City’s gate failures well. This isn’t a generic repair call for us. The humidity, the salt, the shifting soil near the bay, and the mix of 1960s slab homes and newer developments off Emmett F. Lowry Expressway all shape what fails and how we fix it. When we send a technician to your street, they already know what to look for before the truck stops.
Why Carver Gate Repair Is Texas City’s Preferred Gate Repair Company
Carver Gate Repair operates under The Garrison Standard, and that means three things you can hold us to. Every job gets a written price before any work starts. Every repair carries a written guarantee for a full year. Every technician who steps onto your property is background-checked and in uniform. Lonnie Burke runs our crew, and he built the process so homeowners in Texas City don’t have to wonder who’s showing up or what the invoice will say.
Our Gate Repair team works on gates across Texas City, from the neighborhoods off Texas Avenue to the subdivisions near Amburn Road and the streets around Carver Park. We’ve fixed driveway gates in Bayou Vista, swing gates near the Texas City Dike, and slide gates on commercial lots along Highway 146. The calls are local, the failures are local, and our technicians carry the parts that Texas City gates actually need, including corroded control boards and salt-damaged loop detector wiring.
When you call, a live person answers. No answering service that logs a ticket and promises a callback by Tuesday. You describe the problem, we give you a straight answer about what it likely is and what it’ll cost to diagnose, and we schedule a window that we actually keep. That’s been our operating rule since 2008, and it applies to every Texas City job the same as anywhere else we work.
Metal Gate Repair in Texas City
Metal Gate Repair in Texas City usually means steel or wrought-iron gates that have spent years absorbing moisture and salt out of the bay air. The gate itself is rarely the first thing to fail. What dies first is the hardware bolted to it: hinge bearings seize, latch mechanisms rust through, and the bottom rail rots where water sits against the concrete. A metal gate repair here typically runs $250 to $520 depending on whether we’re replacing hinges, rebuilding a latch, or cutting out and welding in a new section of steel.
Hinge and Post Failure
Salt corrosion works on gate hinges like sandpaper. The hinge pin binds, then the gate starts to drag, then the post itself starts to lean because the footing below it has cracked. We replace the hinge with a sealed bearing unit and, where the post has moved, we reset the footing rather than just shimming the gate. A hinge replacement on a Texas City metal gate runs $180 to $340.
Rust Through and Weld Repair
On older steel gates near the waterfront, the bottom rail rusts from the inside out. You’ll see flaking paint and a soft spot where the metal should ring solid. We grind back to clean steel, weld in a new section, and coat the repair so it doesn’t start rusting again in six months. Expect $300 to $600 for a localized weld and rust repair, depending on how far the corrosion has traveled.
Wood Gate Repair in Texas City
Wood Gate Repair in Texas City has a different failure pattern than metal. The wood itself swells and contracts with humidity swings that are more aggressive here than inland because of the bay. A gate that fit fine in February binds in August. The post bases wick moisture up from the soil, the hinge screws loosen, and the gate starts to sag until the latch no longer lines up. A typical wood gate repair runs $200 to $450.
Sagging Frames and Realignment
Most wood gates in Texas City sag because the hinge post has started to move, not because the hinges are bent. Homeowners tighten screws, add a third hinge, and the gate still drags. We check the post footing first. If the post is solid, we realign the frame and reset the hinges with longer structural screws. If the post has rotted at the base, we set a new one. Gate realignment on a wood gate runs $200 to $380.
Latch and Lock Repair
Gate latches near the bay get the same salt exposure as everything else. The spring rusts, the mechanism sticks, and at some point the gate won’t stay closed. We replace the latch with a galvanized or stainless unit and adjust the strike so it engages cleanly. Latch and lock repair on a wood gate runs $140 to $260.
Trusted Brands We Service in Texas City
Carver Gate Repair technicians train on nine gate-motor brands, and the Texas City trucks carry parts for the ones we see most often in this area: Linear, Viking, Ghost Controls, and DoorKing. If your operator is one of these, we can usually repair it the same visit instead of ordering a part and coming back next week. For FAAC and LiftMaster systems, which run a lot of the commercial and high-end residential gates near the industrial corridor, we stock the control boards and limit switches that fail most often in this humidity. You don’t pay for us to learn your system on your nickel.
Common Gate Repair Problems We See in Texas City Homes
- Salt-air corrosion on operator control boards. The circuit board inside your gate operator is the first casualty of Galveston Bay air. We see boards with green corrosion across the terminals while the rest of the operator still works fine mechanically. The fix is usually a board swap and sealing the enclosure, not a full operator replacement.
- Waterfront post footings that crumble. Soil along the bay shoreline moves with tides and storm surge. Hinge posts that looked solid for years suddenly lean a few degrees, and the gate sags until the operator stalls. Hinge adjustment won’t fix this. The post has to be reset with a new footing that reaches below the movement zone.
- Loop detector and photocell wiring failure. Outdoor-rated wiring still takes on moisture at the splices in Texas City humidity. The gate reverses randomly, refuses to close, or sits open because the detector thinks a car is in the path. We trace the splice, cut back the corroded wire, and seal the new connection properly.
- Gate operators stalling mid-travel. A gate that moves six inches and stops usually has a limit switch problem or a drag problem, not a dead motor. We see this on older swing gates throughout Texas City. The fix is often a limit switch adjustment or replacement, which costs far less than a new operator.
Pricing for Gate Repair in Texas City, TX
Here are honest numbers for Texas City. A basic hinge replacement runs $180 to $340. A full gate realignment costs $200 to $380. Latch and lock repair runs $140 to $260. Weld and rust repair on a steel gate runs $300 to $600. Operator control board replacement typically lands between $350 and $700 depending on the brand. A full operator swap, installed, runs $850 to $2,100 when you’re replacing a swing or slide motor. Every one of those prices is written down before we touch a bolt. No estimate that grows once the job is open.
What changes the cost is what we find when we open the panel or pull the post. A gate that sags because the hinge post footing has turned to rubble costs more than one that sags because a hinge pin wore out. We tell you what we found, show you the price, and get your approval before the repair happens. Call (469) 530-2485 for a quote on your specific gate.
We Also Serve Cities Near Texas City
Carver Gate Repair covers Texas City and the surrounding communities, including La Marque, Hitchcock, Dickinson, and Bacliff. If your gate is in one of those towns, you get the same written pricing and the same full-year guarantee. This page covers Gate Repair in Texas City specifically, but the trucks don’t stop at the city limit line.
Serving Texas City, TX – Our Local Coverage Area
We’re based in the Texas City area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Texas City
The reversing is almost always a safety photocell or loop detector problem, not a motor problem. In Texas City, the most common cause is moisture intrusion in the wiring splice. The cell still sends a signal, but it’s a dirty signal, and the control board reads it as an obstruction. We fix it by cutting back the corroded wire at the splice, sealing the new connection, and re-aiming the photocell. Call (469) 530-2485 and we’ll trace it on site. Most of these repairs land between $220 and $420.
Hinge adjustment only works if the post is still solid and plumb. On the waterfront, the footing is often the real problem. Salt air and tidal soil movement eat the concrete and the post starts leaning, which drags the whole gate out of alignment. We’ll check the post first. If it needs a new footing, no amount of hinge work will hold. Post reset and gate realignment runs $300 to $600 depending on the size of the gate and how deep the new footing has to go.
We do. Carver Gate Repair technicians work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. For Texas City, we keep LiftMaster and FAAC control boards and limit switches in the truck because those are the two brands we see most often on waterfront and commercial gates. That means a faster repair and fewer return trips. Call (469) 530-2485 and tell us what brand you have, we’ll bring what it needs.
Yes, and for a lot of Texas City lots, solar makes sense. You skip the trenching and conduit run to the house panel, which can save $400 to $900 on the install. The tradeoff is that solar operators need good sun exposure and a battery that gets replaced every few years. We’ll look at your gate position and tell you straight whether solar will work or whether a hardwired run is the better call. Either way, the price is written before we start.
Most repairs take two to four hours on site. A hinge replacement, board swap, or photocell repair is usually done in one visit. A full gate installation takes one to two days once materials arrive, because it includes setting posts in concrete, running power, mounting the operator, installing the safety edges, and testing the entrapment protection. We never promise same-day installation, and neither should anyone else. You’ll get a firm schedule and a written price before the job starts. Call (469) 530-2485 to get your gate on the schedule.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Texas City through the Garrison Partners family since 2008.