Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Winter Park
A sagging gate on a brick pillar, an operator that hums but won’t move, a slide gate that has jumped its rack. These are the calls we run in Winter Park every week. We’re Carver Gate Repair, and we work exclusively on gates and gate motors. If you’re in Winter Park and your gate won’t open, won’t close, or won’t hold adjustment, call (469) 530-2485. A live person answers. We’ll get a background-checked technician to your property with a written price before any work begins.
Why Carver Gate Repair Is Winter Park’s Preferred Gate Repair Company
Winter Park homeowners tend to know their houses. Older brick, lakefront lots, mature trees, walls that have been standing for decades. We respect that. Our technicians arrive in uniform, give you a written price before touching a bolt, and back every repair with our 365-Day Done Right Promise. That guarantee is in writing, good for a full year from the date of service. If the repair fails inside that window, we come back and fix it free. No charge, no argument.
We’re part of the Garrison Partners family, and we’ve operated to The Garrison Standard since 2008. That standard means written prices, background-checked technicians, and a clean site when we leave. Lonnie Burke leads our crews with one rule: quote it in writing, do it right, stand behind it for a year. Dispatch for Winter Park runs from our South Florida office, and our local crews know the streets, the walls, and the gate systems that are common here.
Winter Park homeowners call us because they’ve had someone no-show, or quote one number and invoice another. Our process removes that. You’ll know the price before work starts, you’ll know who is walking through your gate, and you’ll have a written guarantee when the job is done. That’s the whole point.
Wrought Iron Gate Repair in Winter Park
Wrought iron gate repair in Winter Park usually means one of three things: a hinge failing on a brick or block pillar, a weld cracking at a stress point, or a panel that has dropped out of square and starts dragging on the drive. Older Winter Park homes around the downtown and lakefront neighborhoods often have iron gates hung on masonry walls that were built decades ago. The panel may look fine. The hinge post is usually the problem. We cut and set hinge posts through existing wall columns when needed, reinforce the footing, and re-hang the panel so it swings clean.
A typical wrought iron hinge or post repair in Winter Park runs $280 to $540, depending on whether we need to open the wall and reset the footing. Weld repairs on cracked iron run $160 to $380 per location. If the gate has multiple cracked pickets or a failed bottom rail, expect $400 to $800 for structural repair and weatherproof paint.
Hinge Post Reinforcement on Masonry Walls
Winter Park’s older brick and masonry walls are the real variable here. Most metro crews are used to digging around a wooden post in soil. Here, we regularly open the wall column itself, set a steel post core, and re-mortar around it. That work takes half a day, sometimes longer if the brick needs matching. You’ll know before we start.
Realignment and Weld Repair
A gate that drags or won’t latch may just be out of square. We re-level the panel, reset hinges, and weld any cracks at the stress points, usually the top hinge and the corner of the bottom rail. If the iron is too far gone, we’ll tell you straight rather than patch it for a year.
Metal Gate Repair in Winter Park
Metal gate repair in Winter Park covers aluminum and steel gates, including the tubular steel and aluminum frame gates common in newer subdivisions and the older steel gates found on lakefront properties. The work includes hinge replacement, post reinforcement, panel realignment, lock repair, and rust treatment. A standard hinge and alignment job on a single-drive steel gate runs $240 to $460. Full panel straightening with rust treatment and repaint runs $500 to $900, more if the gate is double-drive or eight feet tall.
Winter Park’s humidity is tough on untreated steel. Gates near Lake Osceola, Lake Virginia, and the Winter Park Chain of Lakes pick up surface rust faster than gates in drier inland neighborhoods. We remove rust, treat the metal, and repaint. If the frame is rusted through at the bottom rail, we’ll say so before quoting a repair that won’t hold.
Rust Treatment on Lakefront Gates
Properties within a few blocks of the lakes consistently show rust at bolt holes, hinges, and the bottom rail where water sits. We grind rust, apply a rust converter, prime, and paint. The repair usually runs $180 to $340 per affected section, and it holds if done right.
Lock and Latch Repair
A gate with a working motor and a dead lock is still not secure. We repair or replace gate locks, latches, and magnetic locks on Winter Park properties, including coordinating the lock with your existing operator. Basic latch repair runs $120 to $220. Full lock replacement with a compatible maglock runs $280 to $480.
Trusted Brands We Service in Winter Park
We train on nine gate motor brands, and three come up most often in Winter Park: Gate Repair on LiftMaster, Linear, and Viking operators. DoorKing and Ghost Controls also show up regularly on lakefront properties and newer builds. Our crews carry common boards, limit switches, loop detectors, and remotes for these brands, which means fewer return trips and faster turnaround for Winter Park customers. If your operator is off-brand or discontinued, we’ll tell you honestly whether it’s repairable or time to replace it, and we’ll write the price either way.
Common Gate Repair Problems We See in Winter Park Homes
- Sagging swing gates on brick pillars. The gate binds on the hinge post, not the panel. We reinforce the masonry footing, replace hardware, and re-level the gate before resetting operator limits. This is the single most common call in Winter Park.
- Operator arms out of alignment. Soil movement after heavy rain, storm debris near older walls, and shifted footings push articulating arms and rack and pinion drives out of alignment. The motor works, but the gate grinds or stops early.
- Safety photocells failing silently. A photocell or edge sensor that has failed may not trigger an alarm. Your gate looks fine. It fails a UL 325 reversal test. We test the sensor and reversal on every automatic gate repair. Should be an annual check on any motorized gate, especially where kids or pets use the yard.
- Slide gates jumping the rack. When a cantilever or wheeled slide gate in Winter Park jumps its rack and pinion track, it’s usually a wheel bearing or a bent rail. Forcing it back on without fixing the bearing just re-creates the failure next month.
Pricing for Gate Repair in Winter Park, FL
Hinge and post repair in Winter Park runs $240 to $540. Wrought iron weld repair runs $160 to $380 per location. Gate motor repair, including new boards, limit switches, or loop detectors, runs $280 to $650 depending on brand and part. Full operator replacement runs $1,200 to $2,800 installed, including safety testing. Every quote is written, and the price you sign is the price you pay. A second visit to adjust or correct the original repair inside the guarantee year is free. Call (469) 530-2485 for a free estimate. We’ll give you a range over the phone and a written price before any work starts.
We Also Serve Cities Near Winter Park
Our crews work throughout Winter Park and the surrounding area, including Maitland, Orlando, Altamonte Springs, and Casselberry. If you’re on the edge of Winter Park or just over the line into one of these cities, the same written pricing and one-year guarantee apply. Call us and we’ll confirm the next available appointment for your area.
Serving Winter Park, FL – Our Local Coverage Area
We’re based in the Winter Park area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Winter Park
The hinge post has usually failed, not the panel. In Winter Park, many swing gates hang on brick or block pillars. The masonry at the hinge point breaks down over time, the post shifts, and the gate drops. The panel looks straight because it is straight. We open the wall, set a steel core, re-mortar, and re-hang the gate. Call (469) 530-2485 if your gate is dragging or binding. The estimate is free.
Yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators. Our technicians are trained on all nine brands, and we carry common parts for LiftMaster and FAAC on most trucks serving Winter Park. A repair call typically starts with a diagnostic visit, and you’ll have a written repair price before we replace anything.
Test it at least once a month, and run a full reversal check every few months. Walk or wave across the beam while the gate is closing. The gate should stop and reverse. If it doesn’t, cut power to the operator at the breaker and call us. A failed safety sensor doesn’t always make noise. On every automatic gate repair in Winter Park we test the photocell and the reversal per UL 325 before we leave, and we show you what we found.
Yes, and this is a repair we see in Winter Park after heavy storms push debris into the track or a wheel bearing fails. We get the gate back on the rail, replace the failed bearing or bent section of track, and test the full run. A jumped slide gate should not be forced. You risk bending the rack and turning a $350 bearing job into a $1,500 rail replacement.
We do. For Winter Park properties where running conduit to the gate is impractical, a solar operator can work well. We specify the panel and battery bank for the gate size and the shade conditions on your lot. The quote includes the panel, mounting, wiring, operator, and safety testing. Installation is scheduled, not same-day: we measure first, then we install.
Call Carver Gate Repair for Gate Work in Winter Park
If your gate is sagging, grinding, or stopped altogether, call (469) 530-2485. We’ll answer live, schedule a background-checked technician for your Winter Park property, and provide a written price before any work begins. Every repair is backed by our 365-Day Done Right Promise. The guarantee is in writing, good for a full year, and the call is free.
Written by Lonnie Burke, Owner at Carver Gate Repair, operating to The Garrison Standard since 2008.