Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Wylie
Gate repair in Wylie typically costs $145 – $340 for common fixes like sag correction, hinge work, and limit switch adjustments, with most residential jobs completed the same day we arrive. Full operator replacement runs higher, usually $450 – $1,200 depending on the motor and arm style. We answer the phone around the clock at (469) 530-2485, and every job gets a written price before any tool leaves the truck.
Wylie’s spread-out neighborhoods sit on North Texas clay that moves with every wet-dry cycle. That ground movement is the single biggest reason gates here bind, sag, or burn out operators. When you call Carver Gate Repair, you’re talking to a company that understands why a gate off FM 544 fails differently than one off SH 121, and we dispatch accordingly.
Why Carver Gate Repair Is Wylie’s Preferred Gate Repair Company
We’re part of the Garrison Partners family, operating to The Garrison Standard since 2008. That means the same written guarantee, the same background-checked and uniformed technicians, and the same upfront pricing on every call in Wylie. No exceptions based on zip code, no surprises once the job is open. Lonnie Burke leads our crews, and the standard he holds us to is the same whether we’re working a Kreymer Estates driveway or a commercial slide gate near Woodbridge Parkway.
Homeowners across Wylie tell us the same story: another company quoted one number, showed up late, and left a gate worse than they found it. Our process is built to end that pattern. You get a live person on the phone day or night. You get a technician in uniform who introduces themselves. You get a written price you approve before we start. And every repair carries our 365-Day Done Right Promise, in writing, covering a full year from the date of service. If it fails inside that window, we return and make it right at no charge.
Response times to most Wylie neighborhoods run under two hours for emergency calls, and we schedule routine work in firm arrival windows, not open-ended “sometime between noon and five” slots. Your time matters as much as your gate.
Commercial Gate Repair in Wylie
Commercial gate repair in Wylie covers the heavier equipment running at business entries, apartment complexes, and controlled-access drives along the SH 121 and FM 544 corridors: slide gates on steel wheels, big swing operators, loop detectors, and safety edge systems that see hundreds of cycles a day. The work is different from residential repair because downtime carries a real cost, and because commercial operators are often paired with access control that has to keep working with the gate, not against it.
Typical commercial repairs in Wylie run $300 – $900 for fault diagnosis, limit adjustments, loop detector replacement, and safety system restoration. Full operator replacement on a commercial slide or swing gate starts around $1,200 and rises with the size of the motor and the condition of the existing track or hinges. Every commercial job starts with a written price and a clear scope of work.
Slide Gate Track and Rack Alignment
Wylie’s clay soil does a number on commercial slide gates. Post footings settle unevenly, the track cants, and the rack and pinion start eating themselves. We re-square the track, re-bed failing footings, and re-set the pinion mesh so the gate runs clean instead of grinding.
Loop Detector and Safety Edge Restoration
A slide gate that won’t hold open or closes on a car usually points to a failed loop detector or a dead safety edge. We test the loop integrity in the pavement, replace detectors when they can’t be tuned, and re-install worn safety edges so the gate reverses on contact like it’s supposed to.
Iron Gate Repair in Wylie
Iron gate repair in Wylie handles the ornamental steel and wrought-iron gates that front so many homes in the city’s older subdivisions off FM 544, plus the newer custom iron work going up around the SH 121 corridor. The repair focus is usually structural: hinge posts leaned out of plumb, welds cracking at stress points, rails sagging, and panels dragging on the driveway. Cosmetic rust repair is part of the job too, but the structural fit comes first.
Residential iron gate work in Wylie runs $150 – $450 for hinge re-welds, post re-setting, and sag correction. If the post footing has failed and needs new concrete, expect to add $100 – $250 to that range depending on the size of the pour and whether the post can be salvaged. We quote the whole job in writing before we start, so you know the number on the front end.
Hinge Post Re-Set in Expansive Clay
An iron gate starts sagging when the hinge post leans, and in Wylie the cause is almost always the clay beneath the footing. We dig out the old concrete, re-bed the post in properly cured concrete at the right depth, and re-hang the gate so it swings true. This is not a shim job; it’s a footing replacement.
Weld Repair and Rust Treatment
North Texas humidity and rain cycles work on bare welds fast. We grind out cracked welds, re-weld with proper penetration, and treat the surrounding metal so the repair doesn’t become a new rust point in six months. The written guarantee covers the weld for a full year.
Trusted Brands We Service in Wylie
Our technicians work on the gate motors Wylie homeowners and businesses actually have installed: Linear, Viking, Ghost Controls, DoorKing, and five more major brands. That matters because the failure pattern on a Viking swing arm is different from a Ghost Controls slide operator, and matching the right part and the right diagnostic sequence to the system on your posts saves both time and money. We keep common boards, limit switches, and receiver modules in local inventory, so turnaround for the most common Wylie repairs is hours rather than days. No “we’ll order it and maybe see you next week” when your gate is stuck open at midnight.
Common Gate Repair Problems We See in Wylie Homes
- Clay-shifted hinge posts: In older Wylie neighborhoods off FM 544, driveway gates sag because the post footing moves in expansive clay. The gate drags, the operator binds, and eventually both need work.
- Operator burnout from a binding gate: A slide or swing operator that has to muscle an out-of-level gate every cycle will fault or burn out its board. On the newer SH 121 side, we more often see the operator healthy while the keypad, photocell, or loop detector fails.
- Safety system bypasses: After a photocell nuisance-trips a few times, someone bypasses it. The gate now closes on anything in the path, which is a genuine hazard. We re-install and re-test safety eyes and edges on every call that involves them.
- Post footing settlement on commercial gates: Wylie’s commercial slide gates, especially on the busier east-west corridors, fall out of square when concrete pads shift before the rack and pinion show wear. The fix starts under the gate, not on it.
Pricing for Gate Repair in Wylie, TX
You should know the numbers before you call, so here they are. Basic hinge and latch work in Wylie runs $145 – $250. Sag correction with post re-setting lands between $200 and $400. Limit switch, photocell, or loop detector replacement goes $180 – $350. Residential operator replacement runs $450 – $900; commercial operators start at $1,200. Full custom gate installation, including groundworks, power, safety edges, and reversal testing, starts around $3,000 and goes up with the size and material of the gate and the amount of concrete work required.
Every price is written and approved by you before any work begins. The invoice you see at the end matches the quote you signed at the start. Free estimates, no traveling charge to Wylie, and the 365-Day Done Right Promise on every repair. Call (469) 530-2485 and get a real number from a real person.
We Also Serve Cities Near Wylie
Our Gate Repair crews run regular routes through Sachse, Lavon, Rowlett, and Garland, so if you’re just outside the Wylie city line, we’re still close. The same written prices, the same guarantee, and the same live phone answer. If your gate is down and you need a professional opinion, call us. For more detail on our service footprint, see Gate Repair in Wylie.
Serving Wylie, TX – Our Local Coverage Area
We’re based in the Wylie area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Wylie
Sag correction is usually enough when the gate drags slightly at the latch side and the hinge post is still plumb; a full post replacement is needed when the post itself has leaned out of vertical in the clay, which most Wylie homeowners can spot by sighting down the post line. If the operator is faulting at the same point every cycle, the problem is structural, not electrical. Call (469) 530-2485 and we’ll diagnose it on site with a written quote.
Not necessarily. In many Wylie homes the operator is fine and the fault comes from a misaligned safety photocell, a failed loop detector, or a gate binding on a shifted hinge post. We diagnose the whole system before recommending a replacement, and the diagnosis is part of the free estimate. If the operator does need replacing, you’ll see the exact price before we order anything.
Yes. We handle driveway swing and slide gates all over Wylie’s residential neighborhoods and heavy commercial slide gates along the FM 544 and SH 121 corridors. The crews, the parts stock, and the written pricing apply to both. Commercial work often runs on scheduled maintenance plans with documented safety testing.
Most residential hinge, latch, and limit switch repairs are completed in two to four hours on site. Post re-sets that require new concrete take longer, usually spanning a day for the footwork and cure time before the gate is re-hung. We give you a clear time estimate with your written quote so you’re never wondering when the job ends.
Any gate operating automatically should have working safety photocells across the opening and, on slide gates, a working safety edge that reverses on contact. After every repair involving the motor, track, or hinge system, our crews run the full reversal and obstruction test before we call the job done. If a safety device has been bypassed, we restore it; we won’t leave an automatic gate running without its safeties.
Need a gate fixed in Wylie today? Call (469) 530-2485. You’ll get a live person, a straight answer, and a written price before any work starts. That’s The Garrison Standard, and it’s how we work on every gate, every time.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Wylie, TX.