Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in University Place, WA
If your gate is stuck, sagging, or the motor has stopped responding in University Place, you want someone who shows up on time and quotes a written price before touching anything. That is how we work. University Place homes range from 1960s ramblers near Chambers Creek to newer construction in the eastern hills, and the mix of older steel gates, wooden privacy gates, and salt air from Puget Sound creates repair patterns we see week after week. Call (469) 530-2485 and you’ll reach a live person, day or night, not a voicemail box.
Why University Place Homes Are Different
University Place sits on a slope running west toward Puget Sound, and that geography does two things to gates. First, the marine air carries moisture and salt that accelerates corrosion on steel hinges, latch hardware, and exposed motor housings. Second, many driveways have a noticeable grade, which puts steady, uneven load on gate hinges and forces motors to work harder every cycle. A gate that would last another three years on flat ground in Lakewood often needs hinge or roller attention sooner here.
The housing stock matters too. Older properties in the west end, around Grandview Drive and the neighborhoods above Chambers Bay, frequently have original steel tube gates installed in the 1980s and 1990s, with rust at the base and hinge posts working loose in older concrete. Newer subdivisions on the eastern side of University Place, toward Bridgeport Way and Cirque Drive, commonly have builder-installed swing operators that were never properly adjusted after the fence settled. HOAs in these subdivisions tend to enforce gate appearance and function standards, which means homeowners cannot simply remove a broken gate and wait. A sagging gate or dead motor becomes a compliance issue, not just a convenience problem.
We also see a lot of gates used daily by multiple vehicles, school traffic, and delivery trucks. The combination of grade, moisture, and daily cycling means limit switches drift, loop detectors get dirty, and articulating arms shear pins more often than homeowners expect. Our crews plan for those specific failure modes when they dispatch to University Place.
Our Main University Place Services
University Place homeowners call us most often for two things: a gate that will not open or close properly, and a motor that has quit responding entirely. Here is how we handle each.
Gate Repair in University Place
Sagging gates, seized hinges, broken welds, misaligned tracks, latch failures, binding at the catch post. In University Place, the usual culprits are rust from marine air and ground shift on sloped driveways. We bring steel tube stock, hinge sets, casters, and latch hardware so most repairs are completed in one trip. We quote a written price before any work starts, and the repair carries our 365-Day Done Right Promise. If the same problem returns inside a year, the second visit is free. Gate Repair in University Place

Gate Installation in University Place
A new gate in University Place has to account for slope, prevailing wind off the Sound, and the existing fence material. We measure on site, discuss gate weight and hinge type, and match the new gate to the driveway grade so the operator is not fighting gravity from day one. Steel, aluminum, and wood-frame designs are all options. Every installation gets a written price before materials are ordered. We also handle removal and hauling of the old gate. Gate Installation in University Place

Gate Motor Repair in University Place
When a motor hums and will not move the gate, or trips its breaker repeatedly, the problem is usually the capacitor, limit switch, or a damaged gear in the operator. Moisture intrusion into the control board is common in University Place because of the marine air. We open the operator, diagnose the fault in plain terms, and show you the failed part before replacing it. We service swing operators, slide operators, and the wiring from the control board to terminals. Gate Motor Repair in University Place

What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in University Place
We service Linear, Viking, Ghost Controls, and DoorKing equipment in University Place, along with other major brands. Our vans carry common boards, capacitors, remotes, and photo eyes for these systems. If we need a part not on the truck, we source it quickly and return to finish the job without starting over. See our brands page for the full list.
Pricing for Gate Company in University Place, WA
| Service | Typical range in University Place |
|---|---|
| Gate repair, general | $180 – $340 |
| Gate motor repair | $220 – $450 |
| Hinge replacement | $150 – $280 |
| Latch replacement | $95 – $190 |
| Track realignment | $160 – $300 |
| Gate wheel/caster replacement | $110 – $220 |
| Chain repair or replacement | $140 – $260 |
| Gate operator replacement | $680 – $1,100 |
| Swing gate opener installation | $900 – $1,800 |
| Sliding gate motor installation | $950 – $1,750 |
In University Place, prices tend to run higher when the gate has severe corrosion, when the driveway grade requires extra hinge reinforcement, or when HOA rules dictate specific materials. Whatever the number is, you see it in writing before we start. It does not move at the door.
Neighborhoods We Serve in University Place
We work across all of University Place, from the older streets near Chambers Bay to the newer subdivisions east of Bridgeport Way. We typically schedule service calls in University Place within one to two days, and we can often arrive the same day when a gate is stuck open or will not budge at all.
- Chambers Bay area
- Grandview Drive corridor
- Bridgeport Way east side
- Cirque Drive subdivisions
- West end near the Sound
Service Area – Cities Near University Place
We also cover the communities around University Place, including Steilacoom, WA, Lakewood, WA, Tacoma, WA, and DuPont, WA. Dispatch and scheduling run through our Seattle office, and crews serve University Place directly, so you get local service without a long wait for an appointment.
Serving University Place, WA – Our Local Coverage Area
We’re based in the University Place area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in University Place
We can usually schedule within one to two business days. If your gate is stuck open or trapping a vehicle, call us and we will tell you when we can be at your University Place address. The phone line is staffed 24 hours a day, every day.
Most residential gate replacements do not require a permit, but University Place HOAs frequently have rules about gate height, material, and appearance. We recommend checking any HOA requirements before ordering a new gate. We are familiar with common area standards and can help you sort through them.
You can call a real person any time at (469) 530-2485. If the situation is urgent, a stuck-open gate or a gate blocking vehicles, we will tell you over the phone what to do while you wait and when a technician can arrive in University Place.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What University Place Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.





Before
After
Before
After
Before
After