Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Menlo Park, CA
We’re Carver Gate Repair, the Menlo Park gate company that specializes in automatic driveway gates, pedestrian gates, and the motors that run them. Most Menlo Park calls center on one of three things: a gate that stopped opening, a new gate purchase, or a motor that runs but won’t stop or won’t move the gate. This page gives you the lay of the land: what Menlo Park repair work typically costs, which neighborhoods we cover, and how our written-price and written-guarantee process works. If you need a price today, call (469) 530-2485 and a live person will answer.
Why Menlo Park Homes Are Different
Menlo Park gate work splits into two very different jobs depending on where you live. West of El Camino Real, in neighborhoods like The Willows, Allied Arts, and Sharon Heights, we see older estate properties with long driveways, heavy steel or wrought-iron gates, and underground loop detectors that have been in the ground since the Reagan administration. East of 101, in Belle Haven and the newer construction near Marsh Road, the work leans toward lighter aluminum gates and newer operator models, often still under partial warranty. The difference matters because a heavy swing gate on degrading hinges puts a completely different load on a motor than a light slide gate on a new track.
The marine influence off the Bay means cool, damp mornings and occasional fog, which accelerates rust on steel gate frames and corrodes exposed control boards faster than inland climates. We routinely see circuit boards in Menlo Park that have failed from moisture intrusion and rusted limit switch contacts, problems that would be rare in drier parts of the Bay Area. Homes near San Francisquito Creek also contend with soil movement that shifts gate posts over time, pulling gates out of alignment and causing them to bind against the latch or the motor. Menlo Park’s permit office requires a building permit for any gate installation that includes new footings or changes to an existing driveway approach, and many HOAs in the area require advance design review before a gate goes in. When you call us, mention your neighborhood and whether an HOA is involved, and we’ll tell you what’s needed before anyone shows up.
Our Main Menlo Park Services
Most Menlo Park homeowners reach us for one of three reasons: a gate that stopped working, a motor that runs but doesn’t move the gate, or a full new installation. Each service has its own Menlo Park page with detailed pricing and scope. What follows is the short version.
Gate Repair in Menlo Park
A gate that won’t open is usually a mechanical failure: a broken hinge, a bent track, a limit switch that’s out of adjustment, or a chain that’s jumped. On Menlo Park’s older estate properties, we frequently replace worn hinges and rusty ground tracks before touching the motor, because no operator can push a gate that’s mechanically binding. On newer gates, the call is often simpler: a burned capacitor or a failed battery in the operator. Every repair includes a written guarantee, good for a full year. If the same failure happens again inside that window, the second visit is free. Gate Repair in Menlo Park
Gate Installation in Menlo Park
New gate work in Menlo Park starts with the question of permits and HOA approval, then moves to gate weight, swing versus slide, and operator selection. We walk you through all of it: concrete footings, post depth, electrical conduit from the house or a dedicated circuit, and safety features like photo eyes and pressure edges. The written quote covers the gate, the operator, the hardware, the electrical, and the cleanup. No number changes once you approve it. Gate Installation in Menlo Park
Gate Motor Repair in Menlo Park
When the motor runs but the gate doesn’t move, or the arm swings erratically, the problem is usually in the operator: a stripped gear, a bad capacitor, a dead control board, or a limit switch that’s drifted. We work on nine brands, including Viking, Ghost Controls, DoorKing, and Elite, and we match replacement parts to the motor already on your Menlo Park property, not whatever happens to be on the truck. Gate Motor Repair in Menlo Park
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Menlo Park
Our technicians are trained on nine gate-motor brands so the right part and the right know-how land on your Menlo Park driveway the first time. We commonly service DoorKing, Elite, and Viking operators in this area, along with Ghost Controls systems on newer residential installs. Parts for the most common failures are carried on our service vehicles, which keeps turnaround tight on most Menlo Park dispatch calls. See the full list on our brands page.
Pricing for Gate Company in Menlo Park, CA
| Service | Typical range in Menlo Park |
|---|---|
| Service call and on-site diagnosis | $95 – $145 |
| Gate hinge replacement (pair) | $200 – $360 |
| Gate wheel and roller replacement | $90 – $180 per wheel |
| Gate track repair (minor bending/misalignment) | $160 – $280 |
| Welded steel gate repair (crack, broken joint) | $220 – $480 |
| Control board replacement | $280 – $420 |
| Limit switch replacement | $130 – $220 |
| Loop detector replacement | $220 – $430 |
| Gate remote or keypad replacement | $110 – $210 |
| Operator arm replacement | $200 – $340 |
| Slide gate motor replacement | $720 – $1,480 |
| Swing gate motor replacement | $680 – $1,240 |
Prices in Menlo Park run slightly higher on older estate gates west of El Camino, where heavy steel and long driveways mean more reinforcement and more labor per job. On the east side, lighter aluminum gates and newer operators tend to land at the lower end of these ranges. Whatever the number is, it’s a written price delivered before any work starts and it doesn’t move when the work begins.
Neighborhoods We Serve in Menlo Park
We dispatch across the full city, from Sharon Heights and The Willows to Allied Arts, Suburban Park, and Belle Haven. Our Menlo Park crews also respond to the unincorporated portions just outside the city line, where driveway gate setbacks and easement rules differ.
- Sharon Heights
- The Willows
- Allied Arts
- Suburban Park
- Belle Haven
Response time across the Menlo Park area is typically same-day for emergency repair calls placed before mid-afternoon. A live person answers the phone at any hour.
Service Area – Cities Near Menlo Park
We also run calls in the towns directly around Menlo Park. Homeowners in Atherton, CA, Stanford, CA, Palo Alto, CA, and Redwood City, CA reach the same live dispatch line and get the same written-price and written-guarantee terms. If your property sits on the Menlo Park border, call and we’ll tell you which crew covers your street.
Serving Menlo Park, CA – Our Local Coverage Area
We’re based in the Menlo Park area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Menlo Park
For a gate stuck open or stuck closed, we aim for same-day service when you call before mid-afternoon. Scheduling is coordinated from our San Francisco Bay Area office, and Menlo Park calls are routed to a local crew. Call (469) 530-2485 and we’ll give you a straight arrival window.
Many Menlo Park HOAs, including several in Sharon Heights and west Menlo Park, require design review before a gate installation or a major gate replacement. We’ll tell you what documentation the HOA typically asks for and adjust the quote to include whatever the board needs to see.
Permits are the homeowner’s responsibility, but we prepare the scope of work and the site plan details the Menlo Park building department asks for. Footing depth, post size, and operator specifications are all documented in the written quote before you apply. Call (469) 530-2485 and we’ll walk you through it.
For a written gate repair or installation price in Menlo Park, call (469) 530-2485. You’ll speak to a live person, and the price you approve is the price you pay. Estimates are free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Menlo Park Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.