Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Graham, WA
Graham sits at the southeast edge of Pierce County, where rural acreage and 1990s-era subdivisions share the same roads. Gate work here runs the full range: a farm-style driveway gate on 254th Street, a swing gate on a two-acre lot off Meridian, or a motorized entry system for a newer build near Kapowsin. Whatever the job, the deciding factors are the same: wet winters, soft ground, and gates that need to keep working year-round. Call Carver Gate Repair at (469) 530-2485 for a written price before any work starts.
Why Graham Homes Are Different
Graham’s housing stock is a mix of older rural properties and planned communities that went up in the 1990s and early 2000s. Many homes off Meridian Avenue and 224th Street sit on lots large enough for a serious gate, not a decorative fence insert. That changes the work. A swing gate on a long gravel drive needs a heavier operator than one on a short concrete pad in a city lot. The frost line and soil composition matter here too: clay-heavy ground near the Puyallup River basin and the lower slopes toward Orting holds water through the winter, which is exactly when a post starts to lean or a gate drops half an inch and starts dragging.
Wet, mild winters mean gate hardware in Graham rusts differently than it does east of the Cascades. We see rust at hinge welds and limit switch housings more than we see freeze damage. We also see a lot of gates that were installed without enough post depth, which is a problem you won’t notice until the ground is saturated and the gate suddenly won’t latch. Graham has no single dominant HOA structure; much of the area is unincorporated Pierce County. That means permitting and setback rules are less uniform than in a city like Puyallup, and the right fix sometimes depends on exactly where the property line falls. We check the actual site conditions before we quote anything.
Our Main Graham Services
Most calls from Graham homeowners come down to two things: a gate that has stopped working correctly, or a gate that needs to be installed or replaced. Here’s what each job looks like in this area.
Gate Repair in Graham
A gate that won’t open, won’t close, or drags against the ground is the most common call we take in Graham. We start by checking the posts, hinges, and operator, then we write up the fix with a firm price. A bent hinge on a heavy steel gate off Kapowsin Highway is a different repair than a sagging gate on a vinyl fence line near the Graham-Kapowsin High School neighborhoods, and the price reflects what is actually wrong, not a standard charge. Gate Repair in Graham covers what we check, what we fix, and what the repair should cost.
Gate Installation in Graham
New gate work in Graham almost always involves the driveway or the entry point to a larger property. That means we spend time on post depth, ground slope, and the swing or slide path before the gate goes in. A gate on a sloped drive along 200th Street needs a different mount than one on flat ground in a cul-de-sac. We quote the full job in writing: gate, posts, operator if it is part of the plan, and the labor to make it square and level. Gate Installation in Graham has the details and the pricing ranges.
Gate Motor Repair in Graham
When the gate itself is fine but the opener has quit, the issue is usually the motor, a limit switch, or a control board. Graham’s wet winters are hard on circuit boards that sit in a housing that is not fully sealed. We bring the right parts for the operator that is already installed, whether it is a FAAC on a swing arm or a Viking on a slide track. A motor replacement is quoted before we start, and the work is covered in writing for a full year. Gate Motor Repair in Graham explains what we replace and what it typically costs.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Graham
Our crews work on FAAC, BFT, Linear, and Viking operators routinely in Graham. Parts for common repairs on these brands are stocked on the truck, and when a board or a motor is not on hand, it is usually at the shop and can be run out the same day. Our brands page lists all nine systems we are trained to service.
Pricing for Gate Company in Graham, WA
| Service | Typical range in Graham |
|---|---|
| Gate repair (minor, hinge or latch) | $95 – $160 |
| Gate repair (welding, post reset) | $180 – $400 |
| Swing gate operator replacement | $850 – $1,450 |
| Slide gate operator replacement | $1,100 – $1,900 |
| Control board replacement | $350 – $600 |
| Limit switch replacement | $180 – $320 |
| Loop detector replacement | $275 – $475 |
| Gate installation (single swing) | $1,800 – $3,500 |
| Gate installation (double swing) | $3,000 – $6,000 |
| Gate installation (slide) | $3,500 – $7,000 |
Prices in Graham run slightly higher on properties with long gravel driveways or steep grades, where we need to add concrete work or a heavier operator. What you see on the written quote is what you pay. That number is agreed before any work starts, and it does not move at the door.
Neighborhoods We Serve in Graham
We run calls all over the Graham area, from the older rural parcels south of 224th to the newer subdivisions north of the high school. Typical dispatch time to most Graham addresses is under an hour once the truck is rolling from the Pierce County coverage area.
- Graham-Kapowsin
- Kapowsin
- Meridian Avenue corridor
- 224th Street area
- South Hill edge (Graham side)
Service Area – Cities Near Graham
Our crews also cover the surrounding Pierce County communities. If you are just outside Graham, we serve Spanaway, WA, Orting, WA, Sumner, WA, and Bonney Lake, WA with the same written-price policy and the same one-year guarantee on every repair.
Serving Graham, WA – Our Local Coverage Area
We’re based in the Graham area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Graham
Most Graham calls are reached the same day, and we run emergency calls around the clock. A live person answers the phone at (469) 530-2485, not a voicemail box. For urgent jobs where a gate is stuck open or stuck closed, we dispatch as soon as a technician is available.
Much of Graham is unincorporated Pierce County, so permit requirements vary by property. For most repairs, no permit is needed. For new installations near a county road or with electrical work, the county may require one. We can tell you what applies to your property before you commit.
Yes. Every Carver Gate Repair job in Graham gets a written price before any work begins. That is part of The Garrison Standard, and it is not negotiable. The number on the quote is the number on the invoice.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Graham Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.