Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Lorenzo, CA
Carver Gate Repair handles gate work across San Lorenzo, CA, and we approach this community differently than nearby cities because the housing stock and lot layouts demand it. San Lorenzo was built as planned suburban housing, which means most homes sit on modest lots with driveway gates close to the street and electrical service that has seen decades of weather. We respond to every San Lorenzo call with a written price before any work starts, and a live person answers the phone around the clock. Call (469) 530-2485 and you’ll talk to someone who can schedule a San Lorenzo visit, not a call center queue.
Why San Lorenzo Homes Are Different
San Lorenzo’s housing stock leans heavily toward mid-century single-family homes on flat, rectangular lots. That sounds simple, but it changes gate work in practical ways. Many original gates swing on posts set into soil that shifts with Bay Area winter rains, leaving hinges out of square by spring. Narrow side yards between homes mean swing gates often clear a property line by inches, and a replacement post has to be set precisely or the gate rubs on its first week. Driveway gates here also tend to sit close to the sidewalk, so a swing gate’s arc crosses a public walkway, and the city expects that path to stay clear.
The salty air rolling off the bay accelerates rust on steel hardware, hinges, and operator arms. We see it on every brand: a gate that functions fine in a drier inland climate will bind and squeal in San Lorenzo within a season or two if hardware wasn’t lubricated and the frame wasn’t primed at installation. Flat terrain is one mercy. San Lorenzo doesn’t have the slope-driveway problems of the East Bay hills, and that keeps most gate alignment work simpler. What it does have is concentrated weekday traffic along Hesperian Boulevard and Lewelling Boulevard, which means a gate that won’t open on a Monday morning blocks a car into a driveway with no easy alternate route.
Homes here tend to shift hands, and a new owner often inherits a gate operator installed fifteen or twenty years ago with no manual and no record of who serviced it. That’s the bulk of our San Lorenzo work: sorting out existing gates that were never quite right and making them right, in writing, with a guarantee that lasts a full year.
Our Main San Lorenzo Services
San Lorenzo homeowners call us most often for two situations: a gate that has stopped opening reliably, and a gate or motor that has reached the end of its serviceable life. Each service has its own detailed San Lorenzo page linked below.
Gate Repair in San Lorenzo
Most San Lorenzo repair calls start with a gate that drags, sags, or refuses to close all the way. The issue is usually mechanical before it’s electrical: rusted hinges, a bent post, a wheel that’s worn flat on the concrete track. We work through the gate from the hinge side out, replace what’s beyond saving, and test the full sweep at least a dozen times before we call it done. On gates close to the sidewalk, we also confirm the arc doesn’t pinch a pedestrian path, because on this terrain a gate that looked square in the morning can shift with afternoon heat. Gate Repair in San Lorenzo
Gate Installation in San Lorenzo
A new gate in San Lorenzo has to fit the house and the lot, not the other way around. We measure the existing opening, check how the driveway falls toward the street, and account for bay air when choosing steel gauge and hardware. Most San Lorenzo installs are swing gates on square-tube steel frames, but we also set slide gates where a short setback doesn’t leave room for a swing arc. We pull permits when the municipality requires them, and we leave the site swept and the old gate staged neatly for pickup, not dumped on the lawn. Gate Installation in San Lorenzo
Gate Motor Repair in San Lorenzo
San Lorenzo’s humid bay air is hard on gate motors, and the telltale is usually a motor that runs but won’t move the gate, or a limit switch that lets the gate overrun and slam the post. We bench-test the board, replace limit switches and loop detectors as needed, and if the motor is burned past saving, we quote a replacement matched to the arm that’s already bolted in place. Most motor repairs happen the same day we arrive, because the failure is usually one component, not the whole system. Gate Motor Repair in San Lorenzo
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Lorenzo
We carry repair parts for the brands most common in San Lorenzo: FAAC, BFT, Linear, and Viking among them. We stock limit switches, loop detectors, and replacement arms for these and other systems, which keeps most San Lorenzo turnaround to a single visit. See our brands for the full list and the details on each.
Pricing for Gate Company in San Lorenzo, CA
These are the ranges we typically see in San Lorenzo for the work listed. Every written quote we give falls inside the range for the specific job, and the price is agreed before any work starts.
| Service | Typical range in San Lorenzo |
|---|---|
| Gate repair (typical) | $200 – $500 |
| Gate motor repair | $250 – $650 |
| Hinge replacement | $150 – $350 |
| Gate wheel / roller replacement | $120 – $280 |
| Gate frame welding | $180 – $450 |
| Limit switch replacement | $150 – $325 |
| Loop detector replacement | $200 – $400 |
| Gate motor replacement | $450 – $1,100 |
| Full swing gate installation | $1,500 – $4,500 |
| Full slide gate installation | $2,500 – $6,500 |
| Gate opener remote / keypad | $75 – $250 |
| Articulating arm replacement | $250 – $550 |
Prices climb in San Lorenzo when bay-air rust has spread from the hardware into the gate frame, because that requires cutting and welding new steel rather than swapping a part. Salt-air corrosion also shortens the life of exposed motor arms, which is why some homes need an arm replacement years before the motor itself fails. Whatever the job looks like, the number on the written quote is the number you pay, and it’s agreed up front.
Neighborhoods We Serve in San Lorenzo
Carver Gate Repair serves every residential neighborhood in San Lorenzo, from the streets north of Hesperian Boulevard down to the edges of the unincorporated county border. We know the area’s most common gate setups because we see them block by block, and we keep standard hinge sizes and wheel sets in the truck so most repairs don’t wait on a part.
- San Lorenzo Village
- Washington Manor
- Baywood
- Del Rey
- The neighborhoods off Bockman Road
We typically reach homes in San Lorenzo within 60 to 90 minutes on repair calls. Repair and emergency work is dispatched same day. Installation and new motor quotes are scheduled, measured, and set on a written timeline.
Service Area – Cities Near San Lorenzo
Our crews cover San Lorenzo and the surrounding Alameda County area, including Castro Valley, CA, San Leandro, CA, and Union City, CA. We also serve Oakland, FL for Florida-based customers in that market. If you’re on the border between two cities, call us and we’ll confirm coverage and response time.
Serving San Lorenzo, CA – Our Local Coverage Area
We’re based in the San Lorenzo area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Lorenzo
Most San Lorenzo repair calls are reached within 60 to 90 minutes. Emergency calls are dispatched same day. Installation and motor replacement quotes are scheduled for a set time, measured on site, and delivered in writing before any work begins.
It depends on the job. Repairs and part replacements generally don’t need permits. New gate installations, especially ones with footings or electrical runs, may require county sign-off. We check the current rules for your specific address and handle the paperwork when it’s needed. Call (469) 530-2485 and we’ll tell you straight.
Yes. We cover all of San Lorenzo, including San Lorenzo Village, Washington Manor, Baywood, and the streets around Bockman Road. If your gate is anywhere in the San Lorenzo ZIP codes, you’re in our service area, and a live person answers the phone 24/7 to confirm it.
If your gate is dragging, stuck open, or the motor has quit entirely, call Carver Gate Repair at (469) 530-2485 and we’ll give you a straight answer and a free estimate for the work you actually need, in writing, before anything is scheduled.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Lorenzo Customers Say
"Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H.