Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fleming Island, FL
Gate work in Fleming Island follows the shape of the island itself. Most homes sit on larger lots with long driveways, and gates here tend to be wide, heavy, and exposed to the St. Johns River humidity that eats at hinges and control boards faster than inland properties. We’re Carver Gate Repair, and we handle repair, installation, and motor work across Fleming Island with written pricing and a one-year guarantee on every repair. If a gate won’t open or a motor is grinding, call (469) 530-2485 and a live person answers, day or night.
Why Fleming Island Homes Are Different
Fleming Island’s housing stock runs from 1990s subdivisions off Highway 17 to newer developments near Eagle Harbor and Pace Island, and the gate work reflects that spread. Older swing gates on masonry columns settle over time, so a gate that swung cleanly ten years ago now drags on the latch post. Newer homes lean toward sliding gates and openers mounted on aluminum track, which handle the flat terrain well but collect oak debris and pine needles in the rail.
The river environment is the bigger factor. Salt-adjacent air, morning fog, and summer thunderstorms accelerate corrosion on steel hinges, wire junctions, and control boards. We see failed photo-eye sensors after heavy rain and limit switches that stick from moisture more often here than in neighborhoods farther from the water. Clay County permit rules for driveway gates are limited compared to some metro counties, but HOA covenants in communities like Eagle Harbor and Fleming Island Plantation often control gate height, style, and even opener type, so any new installation starts with a check of what the association will approve.
Our Main Fleming Island Services
These are the two jobs Fleming Island homeowners call about most, plus the motor work that keeps both running. Each has its own page with local pricing and detail, linked below.
Gate Repair in Fleming Island
Repair work here usually means a gate that has sagged on its hinges, a wheel that has come off its track, or a post that has shifted in the sandy soil common on the island. We inspect the full swing or slide path, correct the alignment, and replace worn hardware rather than tightening a bolt and leaving. The humidity near the river means we look for rusted welds and corroded fasteners that a gate in a drier climate would not show. See the full scope and local pricing on the Gate Repair in Fleming Island page.
Gate Installation in Fleming Island
New gates on Fleming Island almost always need to clear an HOA review before the first post hole is dug. We quote the gate, the hardware, and the layout in one written price, then confirm the style and height against the community’s rules. Wide driveways here often call for a cantilever slide gate that does not need a track across the opening, which keeps the drive clear of debris and means no rail to mow around. Full details are on the Gate Installation in Fleming Island page.
Gate Motor Repair in Fleming Island
Motor failures on the island usually trace to a control board that got wet, a capacitor that gave out after a summer of daily cycles, or a limit switch that no longer stops the gate at the right point. We bench-test the board before replacing anything, because a board that tests fine should not be on the invoice. Technicians carry parts for major swing and slide operators so most motor fixes finish in one visit. Read the full breakdown on the Gate Motor Repair in Fleming Island page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fleming Island
Our crews work on Viking, Ghost Controls, DoorKing, and Elite operators most often in Fleming Island, and we keep common boards, arms, and photo-eyes for those brands stocked locally. That means fewer second trips waiting on a part. See the full list on our brands page.
Pricing for Gate Company in Fleming Island, FL
| Service | Typical range in Fleming Island |
|---|---|
| Gate repair, minor (hinge, latch, wheel) | $180 – $340 |
| Gate repair, major (rack, post reset, weld) | $420 – $850 |
| Gate motor replacement (operator only) | $650 – $1,450 |
| Swing gate opener, full install | $1,600 – $3,800 |
| Slide gate opener, full install | $1,900 – $4,500 |
| Single swing gate, new install | $1,800 – $5,500 |
| Double swing gate, new install | $4,000 – $11,000 |
| Slide gate, new install | $2,500 – $8,500 |
| Control board replacement | $280 – $620 |
| Photo-eye or safety sensor replacement | $140 – $300 |
| Keypad or intercom addition | $320 – $850 |
| Service call with diagnostic | $85 – $140 |
What pushes a Fleming Island job toward the top of these ranges is usually rust or moisture damage, a driveway wider than 20 feet, or an HOA that requires a specific style or material. Whatever the number, it is written down and agreed before any work starts, and it does not move at the door.
Neighborhoods We Serve in Fleming Island
We run gate calls across the whole island, from the riverfront lots to the inland subdivisions, and we are typically on-site within one business day for non-emergency repair calls.
- Eagle Harbor
- Pace Island
- Fleming Island Plantation
- Sweetbriar
- Cobblestone
Service Area – Cities Near Fleming Island
We also work in the communities around Fleming Island, including Orange Park, FL, Green Cove Springs, FL, Middleburg, FL, and Jacksonville, FL. Dispatch and scheduling run from our Miami office, while the crew working your gate is local to the Fleming Island area.
Serving Fleming Island, FL – Our Local Coverage Area
We’re based in the Fleming Island area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fleming Island
For most repair calls, a technician reaches Fleming Island within one business day. Emergency calls, like a gate stuck open or a motor that won’t respond, get priority routing and are handled the same day whenever possible. Call (469) 530-2485 and a live person will give you a straight arrival window.
In many Fleming Island communities, yes. Neighborhoods like Eagle Harbor and Fleming Island Plantation review gate height, color, and opener type before installation. We’ll confirm your HOA’s requirements before quoting, so the gate we install is one the association will approve. Call us at (469) 530-2485 to start.
Every repair carries a written one-year guarantee. If the same issue returns inside that window, we come back and fix it at no charge. The guarantee is in writing on your invoice, not a verbal promise. Call (469) 530-2485 and we’ll schedule the return visit.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fleming Island Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.