Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Camas, WA
Gate repair in Camas, WA usually runs between $180 and $340 for most mechanical failures, while full motor replacements typically land between $650 and $950. We work on gates across Camas every week, and the local combination of wet winters, older custom gates, and long driveways on sloped lots means repairs here follow a predictable pattern. If your gate won’t open, sags on its hinges, or the motor runs but the gate doesn’t move, call (469) 530-2485 and we’ll give you a written price before any work starts.
Why Camas Homes Are Different
Camas sits in the Columbia River Gorge rain shadow, which means gates here endure long wet seasons followed by dry, warm summers. That cycle is hard on powder-coated steel and even harder on wood gates: moisture gets into the bottom rail, the gate swells, and the hinges start to bind. We see this most often in neighborhoods like Lacamas Shores, Prune Hill, and the hillside lots above downtown, where gates face prevailing wind and rain off the river. Many Camas properties were built before automatic gate operators became standard, so retrofitting older swing gates onto existing posts is a regular part of the work. HOA communities on the north side of Lacamas Lake often have specific finish and height requirements, and we keep that in mind when quoting any replacement.
Our Main Camas Services
Most Camas homeowners call us for one of two jobs: a gate that’s stopped working entirely, or a motor system that’s been failing in wet weather. Each of the three services below has its own Camas page with local pricing and timelines.
Gate Repair in Camas
Gate repair in Camas often starts with a gate that’s hard to move by hand, sagging at the latch post, or leaving wheel marks on the driveway where the caster has failed. We check hinge play, weld integrity on steel frames, and any warping in wood panels, especially after the wet months. In Camas, we also see a fair number of gates where the mounting posts themselves have shifted, because hillside soil moves more than flat-ground clay. Gate Repair in Camas covers common failures, response times, and what a typical repair costs.
Gate Installation in Camas
New gate installation in Camas usually starts with a site visit to measure the opening, check the driveway grade, and confirm where the operator will mount. A lot of Camas driveways slope, so we plan for swing clearance and make sure the gate doesn’t drag on the high side. We quote the full install in writing: gate, hinges, posts, operator, and safety edges if the system calls for them. Gate Installation in Camas walks through the process and what a full installation includes.
Gate Motor Repair in Camas
Gate motor repair in Camas is often a limit switch that’s drifted or a control board that’s taken on moisture. We bench-test motors from Viking, Ghost Controls, and DoorKing regularly, and in Camas the most common failure we see is a swing operator that’s been working against a stiff hinge for too long. If the motor hums but the gate doesn’t move, the gearbox is usually the culprit, and that’s repairable without pulling the whole operator. Gate Motor Repair in Camas covers what we test, what we replace, and how we price motor work.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Camas
We service Viking, Ghost Controls, DoorKing, and Elite operators in Camas, along with the rest of our nine-brand lineup. The most common boards and gear kits for those four brands are stocked locally, so most motor repairs don’t wait on a parts shipment. Our brands page lists the full lineup and what we keep on the truck.
Pricing for Gate Company in Camas, WA
| Service | Typical range in Camas |
|---|---|
| Gate repair (mechanical) | $180 – $340 |
| Hinge replacement | $120 – $260 per hinge |
| Gate wheel/caster replacement | $90 – $180 |
| Gate motor repair | $250 – $450 |
| Gate motor replacement | $650 – $950 |
| Limit switch repair | $180 – $320 |
| Control board replacement | $300 – $600 |
| Swing operator replacement | $650 – $950 |
| Slide gate operator replacement | $850 – $1,300 |
| Full gate installation | $2,500 – $7,000 |
Two things push Camas prices toward the upper end of those ranges: site conditions like steep driveways or poor access for lifting equipment, and gate size, since wider gates need heavier hinge hardware. Whatever the job, the price is in writing before we touch the gate: the number on the work order is the number you pay, and every repair carries a written guarantee good for a full year.
Neighborhoods We Serve in Camas
We run calls all across Camas, from Lacamas Shores and the hillside streets around Crown Park to the newer subdivisions north of Lacamas Lake. We quote a standard 2-hour arrival window for scheduled work, and emergency calls are routed to the closest available tech.
- Lacamas Shores
- Prune Hill
- Downtown Camas
- North Camas / Lacamas Lake
- Brentwood / Camas Meadows
Service Area – Cities Near Camas
Besides Camas itself, our crews cover the surrounding Clark County corridor. We run regular calls in Washougal, WA, Vancouver, WA, Battle Ground, WA, and Ridgefield, WA. If you’re just outside Camas on the east side, check the city nearest you: the written-price and guarantee terms don’t change across the service area.
Serving Camas, WA – Our Local Coverage Area
We’re based in the Camas area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Camas
We dispatch to Camas every day and usually have a technician on-site within 2 hours for an emergency repair. Scheduling is coordinated from our Seattle office, but crews work Camas locally, so you get a background-checked technician in a marked vehicle. Call (469) 530-2485 and a live person will take the call, day or night.
It depends on the community. Several Camas HOAs, especially around Lacamas Lake and in the newer subdivisions, have finish and height rules that affect gate replacement. We’ll quote to your HOA’s spec if you have the requirements on hand, and we can note them on the work order so there’s no second-guessing later.
Yes. Every repair we complete in Camas carries The Garrison Standard written guarantee, good for 365 days from the date of service. If the same repair fails inside that window, the second visit is free, no charge, no argument. That’s in writing on every work order.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Camas Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.