Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Antonio, TX
Carver Gate Repair is the San Antonio gate company that works from written prices and a written guarantee on every repair. San Antonio’s mix of older established neighborhoods and newer Hill Country developments means gates here face heat, limestone soil, and HOA standards that vary block by block. The work we do in San Antonio runs from heavy iron driveway gates that have sagged over twenty years to newer tube-steel gates with motor systems that stop reading remotes after a storm. The constant is how we operate: background-checked, uniformed technicians, a price agreed before any work starts, and a phone answered by a live person at (469) 530-2485, any hour.
Why San Antonio Homes Are Different
San Antonio gate work is shaped by three local realities. First, the heat and limestone. Summer temperatures routinely pass 100 degrees, and that expansion and contraction cycle works bolts loose, warps wood gates, and cooks circuit boards inside motor housings that sit in full afternoon sun. Second, the housing stock is split between pre-1990 neighborhoods with ornamental iron on brick pillars and post-2000 developments where gates came with the house but rarely got maintained. Third, the terrain changes the hardware load. Gates on slopes in areas like Stone Oak or Alamo Heights carry more stress on hinges and operators than flat-lot gates, and when a post shifts in the clay-heavy soil common across Bexar County, the gate binds and the motor burns out trying to move it.
Many San Antonio HOAs also require gates to stay functional and match the street’s original look, which means a repair that changes the gate’s appearance can trigger a review. We talk through that before the work, not after. The point is that gate repair in San Antonio is rarely just swapping a part. It usually means correcting the reason the part failed so the fix holds.
If you’re dealing with a gate that will not open, a motor that hums but doesn’t move, or a gate that has dropped on its hinges, call (469) 530-2485. You’ll get a live person, not a voicemail tree.
Key takeaways:
- Every job gets a written price before any work starts.
- Every repair carries the 365-Day Done Right Promise, in writing, good for a full year.
- Technicians are background-checked and uniformed on every call.
- We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule equipment.
Our Main San Antonio Services
San Antonio homeowners call us most for the two things a failed gate creates in a hurry: a gate that will not close all the way, and a motor that stopped responding overnight. Each service has its own San Antonio page with local pricing and specifics.
Gate Repair in San Antonio
Most San Antonio gate repairs start as a sagging leaf, a post that has moved, or a hinge that is grinding. Our technicians work from a written price, and the repair is covered by our written full-year guarantee. On ornamental iron gates common in older San Antonio neighborhoods, we check the pickets, the hinge welds, and the post anchors, not just the visible symptom. The full scope of what Gate Repair in San Antonio covers includes welded steel, tube steel, wood, and ornamental iron.
Gate Installation in San Antonio
A new gate in San Antonio has to stand up to limestone soil, summer heat expansion, and whatever the HOA requires for street-facing elevation. We measure, order, and schedule installations rather than rushing them, and every installation starts with a written price. Whether it’s a driveway gate in a gated community or a side-yard pedestrian gate, the job includes proper post setting for the soil conditions and hardware sized for the gate’s weight. The Gate Installation in San Antonio page walks through the process and pricing in detail.
Gate Motor Repair in San Antonio
San Antonio’s heat is hard on gate motors, especially units mounted without shade. Common failures include capacitors that swell in the heat, limit switches that drift, and control boards that fry after an electrical surge. We diagnose the exact failure and quote the repair in writing before we turn a wrench. Technicians work on LiftMaster, BFT, FAAC, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, so the parts match the equipment already installed. See the Gate Motor Repair in San Antonio page for motor-specific pricing.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Antonio
Our San Antonio technicians are trained across nine gate-motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That means we diagnose the system that is already on the property instead of pushing a replacement just because it is what we stock. We keep common parts for DoorKing and LiftMaster systems on local trucks and order brand-specific boards and arms from our brands network, which keeps most motor repairs to a single visit.
Pricing for Gate Company in San Antonio, TX
These are the ranges San Antonio homeowners should expect for common gate jobs. The price is set in writing before any work begins, and the number does not move at the door.
| Service | Typical range in San Antonio |
|---|---|
| Gate repair (minor, hinges/latch) | $125 – $350 |
| Gate repair (major, weld/alignment) | $300 – $800 |
| Gate motor repair (board/limit switch) | $180 – $450 |
| Gate motor replacement | $900 – $2,400 |
| Driveway gate motor install | $1,750 – $4,200 |
| Full gate replacement | $1,500 – $3,800 |
| Gate installation (new, standard) | $2,000 – $5,500 |
| Solar gate opener install | $1,300 – $3,600 |
| Gate opener install (AC powered) | $1,500 – $4,000 |
| Weld repair (per section) | $145 – $390 |
What pushes a San Antonio gate job toward the top of those ranges is usually post condition, motor age, or the amount of fabrication required to match an existing ornamental design. Every quote is written, every repair is guaranteed in writing for a full year, and every job starts with the price already agreed.
Call (469) 530-2485 for an exact quote on your gate or motor. Estimates are free.
Neighborhoods We Serve in San Antonio
Our San Antonio crews work the whole metro, from in-town neighborhoods with older iron gates to newer subdivisions on the north and west sides where gates and operators were installed by the builder. Response is usually same day or next morning for repair calls inside the city.
- Stone Oak
- Alamo Heights
- Terrell Hills
- Leon Valley
- Alamo Ranch
Service Area – Cities Near San Antonio
Carver Gate Repair covers San Antonio and the surrounding Bexar County cities: Converse, TX, Universal City, TX, Schertz, TX, and Helotes, TX. Dispatch and scheduling are coordinated from the brand’s San Antonio office, and crews serve the metro locally.
Serving San Antonio, TX – Our Local Coverage Area
We’re based in the San Antonio area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Antonio
Most San Antonio repair calls get a same-day or next-morning visit. We’ll give you a straight answer on the phone about when a technician can be there, and the phone is answered by a live person 24/7 at (469) 530-2485.
Depends on the neighborhood and the scope. Repairs that match the existing gate usually do not need approval. A full replacement or a style change often does. We’ll flag it before the work starts so you aren’t surprised later by a letter from the association.
We focus on residential gates and motor systems across San Antonio. That includes driveway gates, pedestrian gates, and operators on residential properties. If the gate is at a house and it’s broken, that’s our job. Call (469) 530-2485 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Antonio Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.