Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in San Diego, CA
Gate repair in San Diego is shaped by salt air, canyon winds, and steel gates that work harder than they should have to. We’re Carver Gate Repair, the gate company San Diego homeowners call when a swing gate sags, a slide gate grinds, or a motor stops answering the remote. Most of our San Diego work falls into three categories: gate repair, gate installation, and gate motor repair. Each has its own page here, with local pricing and plain-language detail. If the gate is stuck open at midnight, call (469) 530-2485 and a live person will answer.
Why San Diego Homes Are Different
San Diego is a coastal city, and that changes how gates fail. Salt air corrodes hinge pins and motor housings faster than inland locations, especially west of the 5 in neighborhoods like Point Loma, Ocean Beach, and La Jolla. We see rust on chain links, limit switches that short after fog seasons, and gate rollers that bind from sand blown into the track. These are not generic failures. They’re specific to a city where the atmosphere is part marine layer and part dry inland air, and where temperatures swing just enough to expand and contract metal.
Terrain plays a role too. Many San Diego properties sit on slopes. Driveway entrances in Mission Hills, Clairemont, and the canyons around Tierrasanta are graded, which means gate posts take more lateral load and swing operators work against gravity. We set post footings with that load in mind. In planned communities and some of the older tracts in North Park and Kensington, gates often sit close to property lines and shared walls, which can complicate motor placement and photo-eye alignment. None of that surprises us. It’s just the terrain.
Our Main San Diego Services
Most homeowners call for one of two things: a gate that won’t open or close properly, or a new gate for a driveway or side yard. Here’s what those jobs look like in San Diego.
Gate Repair in San Diego
Gate repair in San Diego usually starts with a sagging leaf, a grinding roller, or a gate that reverses when it shouldn’t. In coastal neighborhoods, hinge corrosion is the most common culprit. Inland, it’s more often a misaligned track or a weak weld at the post. We’ve repaired gates where the real problem was a shifted post in a canyon-side yard, and gates where salt had eaten through the lower rail. Our crew removes the failed hardware, matches the replacement to what’s already installed, and torques everything back on site. Written price before work starts. Gate Repair in San Diego
Gate Installation in San Diego
A new gate in San Diego has to hold up to marine air, wind, and sloped approaches. We build for all three. Installation includes the gate itself, hinges or rollers, posts set to the right depth for the soil, and the motor system if the homeowner wants automation from day one. In neighborhoods like Rancho Peñasquitos and Scripps Ranch, we often install swing gates on driveways with a grade. In older grid areas like Normal Heights, it’s more often a pedestrian gate with a striker and closer. The job includes a written proposal and a set timeline. Gate Installation in San Diego
Gate Motor Repair in San Diego
When a gate motor fails in San Diego, the cause is often electrical: a limit switch that’s seized, a capacitor that gave out, or a control board that no longer reads the remote signal. We work on nine major motor brands so the repair matches the system already mounted on the property. That matters in San Diego, where many homes have operators that were installed a decade ago and are no longer in production. We carry common parts and know which boards cross-reference. Gate Motor Repair in San Diego
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in San Diego
Our San Diego technicians carry parts and know the failure points for Linear, Viking, Ghost Controls, and DoorKing operators, among the nine brands we service. We stock common control boards, limit switches, and receiver kits locally, which often turns a two-visit motor diagnosis into a one-visit repair. For more detail, see our brands.
Pricing for Gate Company in San Diego, CA
| Service | Typical range in San Diego |
|---|---|
| Gate repair, minor (hinge, roller, striker) | $180 – $340 |
| Gate motor repair (board, limit switch, receiver) | $260 – $480 |
| Gate motor replacement | $850 – $1,800 |
| Slide gate roller replacement | $220 – $400 |
| Swing gate hinge replacement | $200 – $380 |
| Photo-eye / safety sensor replacement | $160 – $300 |
| Control board replacement | $350 – $650 |
| Remote / keypad programming | $90 – $180 |
| Full gate installation (single swing, automated) | $2,800 – $6,500 |
Coastal corrosion and sloped post settings push San Diego prices toward the top of these ranges. The number you get from Carver Gate Repair is a written price agreed before work starts. It does not move at the door.
Neighborhoods We Serve in San Diego
We dispatch crews across San Diego County. Our local scheduling means most San Diego homeowners can get a gate repair visit inside one business day, with the typical call answered within an hour.
- Point Loma and Ocean Beach
- North Park and Kensington
- Mission Hills and Hillcrest
- Clairemont and Tierrasanta
- Scripps Ranch and Rancho Peñasquitos
Service Area – Cities Near San Diego
Carver Gate Repair serves San Diego and the adjacent cities across the metro. If your gate is in Coronado, CA, National City, CA, Chula Vista, CA, or Lemon Grove, CA, the same written-price standard applies. Dispatch is coordinated from our San Diego office, and crews run local routes so you’re not waiting on someone from across the county.
Serving San Diego, CA – Our Local Coverage Area
We’re based in the San Diego area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in San Diego
Most San Diego repair calls can be scheduled within one business day. For emergency situations like a gate stuck open or a motor that won’t respond, we prioritize same-day routing across the city. Call (469) 530-2485 and a live person will confirm the window.
Many San Diego HOAs require approval before a new gate is installed, particularly in planned communities. For repairs, the answer is usually no. We can walk you through what your specific neighborhood needs and build the written quote around the work that’s actually permitted.
We work on nine major gate motor brands, including Linear, Viking, Ghost Controls, and DoorKing. If yours is an older or discontinued model, we’ll assess parts availability before quoting. If the motor has to be replaced, the written quote covers everything, including removal and programming.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What San Diego Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.