Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lomita, CA
Gate work in Lomita, CA means dealing with compact lots, older iron and steel frames, and salt air off San Pedro Bay that finds every exposed bearing and hinge. We’re Carver Gate Repair, and we handle gate repair, gate installation, and gate motor repair across this city with written prices before any work starts and a full-year guarantee on every repair. Lomita’s housing stock leans toward 1940s and 1950s single-family homes with narrow driveways and gates that have seen decades of coastal weather. Call us at (469) 530-2485 and a live person picks up, any hour.
Why Lomita Homes Are Different
Lomita sits a little inland from the coast, but the marine layer still rolls in most mornings, and that matters for gate hardware. Powder coating lasts here, but raw steel doesn’t. We regularly see rust around weld points and bottom rails on Lomita gates that were never prepped for damp air. The lots are tighter than Torrance or Rancho Palos Verdes, which means swing gates often open over sloped driveways, and the hinges take more side load than they were built for.
The older neighborhoods along Narbonne Avenue and around Lomita Park have a lot of original ornamental iron. Those gates look solid but the hinge posts were sometimes set in concrete that’s now cracked, so gates start dragging or binding after years of smooth operation. We also see plenty of estates closer to Rolling Hills with heavier gates, and when a motor fails there, it’s rarely just the motor. Speaking plainly: the limit switch, the loop detector, even the articulating arm on a swing operator all age together in this environment, and a good repair accounts for that.
Our Main Lomita Services
Most calls we get from Lomita homeowners are for two things: a gate that won’t open, and a motor that quit with the gate half-closed. Each service has its own page below.
Gate Repair in Lomita
Gate repair in Lomita usually starts with a sagging gate or a hinge that’s pulling away from the post. Older steel gates along the cross streets between Palos Verdes Drive North and Lomita Boulevard often need more than a hinge adjustment, the post itself has shifted. We write the price before any work starts, so a hinge replacement that looks simple doesn’t turn into a surprise invoice. Full details are on our Gate Repair in Lomita page.
Gate Installation in Lomita
New gate installations in Lomita need to account for set-back requirements and existing driveway angles. We often measure sites where a homeowner is replacing a rusted iron gate with a powder-coated steel frame, and the key is getting the post depth right for the soil, which is mostly clay and drains slowly after rain. See what a full installation includes on the Gate Installation in Lomita page.
Gate Motor Repair in Lomita
Gate motor repair in Lomita frequently comes down to a failed limit switch or a loop detector that’s been tripping for months. Motors by Viking, Ghost Controls, and Elite are common in this area, and we carry parts for all three. When a swing operator’s articulating arm seizes, the motor keeps running and burns itself out, which is a pattern we see here more than inland. Read the specifics at Gate Motor Repair in Lomita.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lomita
We work on Viking, Ghost Controls, DoorKing, and Elite gate motors across Lomita, with common parts stocked locally. That cuts turnaround on repairs to same-day in most cases. See the full list on our brands page.
Pricing for Gate Company in Lomita, CA
| Service | Typical range in Lomita |
|---|---|
| Gate sag or hinge repair | $180 – $340 |
| Weld repair on steel or iron gate | $150 – $400 |
| Gate opener limit switch replacement | $160 – $260 |
| Loop detector replacement | $200 – $350 |
| Articulating arm replacement | $250 – $450 |
| Swing operator replacement | $550 – $950 |
| Slide gate motor replacement | $600 – $1,100 |
| Full gate installation (steel, single swing) | $2,500 – $5,500 |
| Full gate installation (steel, slide) | $3,500 – $7,000 |
| Service call and diagnostic | $75 – $125 |
Rust and post shifting push Lomita prices toward the higher end of those ranges. Every customer gets a written price quoted and agreed before any work begins, so the number never moves at the door.
Neighborhoods We Serve in Lomita
We cover all of Lomita, and most calls put a technician on-site within a few hours depending on the time of day. Typical neighborhoods we work in:
- Lomita Park and the streets around it
- The blocks off Narbonne Avenue
- Areas bordering Lomita Boulevard
- Near the Rolling Hills boundary
- The residential streets south of Palos Verdes Drive North
Service Area – Cities Near Lomita
If you’re outside Lomita but nearby, we publish specific pages for Torrance, CA, Carson, CA, and Rancho Palos Verdes, CA. We also serve Lakewood, WA for homeowners in that area.
Serving Lomita, CA – Our Local Coverage Area
We’re based in the Lomita area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lomita
Dispatch for Lomita is coordinated from our Los Angeles office, and most calls put a technician on-site the same day. For urgent failures that leave a gate stuck open or closed, we respond evenings and weekends. Call (469) 530-2485 and a live person will schedule it.
Most gate repairs don’t need a permit in Lomita. New gate installations may, depending on height, placement, and whether it’s near the sidewalk. We’ll confirm what applies to your property before scheduling the work, and prices are written before anything starts.
Every repair is guaranteed in writing for a full year from the date of service. If the repair fails inside that window, we return at no charge under our 365-Day Done Right Promise. That’s the standard, not an upsell.
Call Carver Gate Repair at (469) 530-2485 for a free estimate on gate work in Lomita, CA.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lomita Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.