Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Maitland, FL
Carver Gate Repair is a gate company serving Maitland, FL, focused exclusively on gates and the motor systems that run them. Most Maitland homes sit on larger lots than you’ll find closer to downtown Orlando, which means longer driveway runs, heavier fabricated steel gates, and swing or slide operators that take real weather year-round. If your gate won’t open, sags on its hinges, or the motor hums but nothing moves, call (469) 530-2485 and we’ll get a background-checked technician out to look at it.
Why Maitland Homes Are Different
Maitland’s housing stock trends toward established neighborhoods with mature trees, older brick or block construction, and driveway gates that were added years after the house went up. That last part matters. A gate hung on a poured footer that wasn’t planned for one behaves differently than a builder-installed gate. We see shifted posts, wheels wearing unevenly on slide gates, and swing gates that bind because the column settled a few degrees. The soil here holds water after heavy rain, and clay expansion pushes against gate posts over time. That’s a Maitland-specific problem, not something you fix once and forget.
Summer heat and afternoon thunderstorms also work against exposed gate hardware. Limit switches corrode faster. Loop detectors in the driveway get confused by standing water after a downpour. Swing operators mounted low take splash from puddles. None of this is exotic, but it’s predictable, and a gate company that knows Maitland plans for it instead of getting surprised by it.
Our Main Maitland Services
The two calls we get most from Maitland homeowners are a gate that stopped opening and a motor that runs but won’t move the gate. Here’s what each job looks like.
Gate Repair in Maitland
Most repair calls start with a gate that’s heavy to push, leaning, or stuck halfway. We check the hinges, the post set, the wheel track if it’s a slide gate, and the pinch points where the gate meets the column. Occasionally we’ll find a broken weld or a post that’s pulled out of its footer. We quote the repair in writing before any work begins, then fix it the same visit when parts allow. Gate Repair in Maitland covers the full scope.
Gate Installation in Maitland
A new gate in Maitland usually means a custom-width steel or aluminum gate built to the existing opening, or a full post-and-gate replacement if the old posts are too far gone to reuse. We measure, order, and schedule the install with a written price agreed before fab starts. The work includes setting posts, hanging the gate, and adjusting it so it swings or slides without binding. Gate Installation in Maitland walks through what’s included.
Gate Motor Repair in Maitland
When the operator hums, clicks, or does nothing at all, the problem usually traces to the limit switch, the loop detector, a burned capacitor, or stripped gearing inside the operator. We carry parts for the common brands and replace what’s failed rather than selling a whole new operator when one component fixes it. Gate Motor Repair in Maitland covers the diagnosis and the repair steps.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Maitland
We work on Viking, Ghost Controls, DoorKing, and Elite operators, among the nine brands our technicians train on. Parts for these sit in local van stock, so most Maitland motor repairs don’t wait on a shipment. See the full list on our brands page.
Pricing for Gate Company in Maitland, FL
| Service | Typical range in Maitland |
|---|---|
| Gate troubleshooting and diagnosis | $85 – $150 |
| Hinge replacement (steel gate, standard pair) | $180 – $340 |
| Gate sag repair and re-alignment | $150 – $375 |
| Weld repair (cracked joint or bracket) | $120 – $280 |
| Cantilever wheel or roller replacement | $160 – $320 |
| Slide gate track repair | $200 – $450 |
| Limit switch replacement | $110 – $240 |
| Loop detector replacement | $160 – $350 |
| Gate motor capacitor replacement | $130 – $270 |
| Full swing or slide operator replacement | $850 – $1,800 |
What pushes a Maitland price toward the top of these ranges is usually access: posts set in old concrete that needs cutting, a gate that’s been scraping for years and wore the operator along with it, or a drive that slopes enough to require re-racking. Every quote is written and agreed before work starts. The number doesn’t move at the door.
Neighborhoods We Serve in Maitland
Our crews cover the whole city, including the HOA-heavy subdivisions east of I-4 and the older lakefront streets where driveway widths run narrow. We’re typically able to schedule Maitland service within one to two business days, with emergency calls handled around the clock.
- Dommerich Hills
- English Estates
- Lake Maitland area
- Maitland Club
- Park Maitland
Service Area – Cities Near Maitland
Beyond Maitland, we take calls from Winter Park, FL, Altamonte Springs, FL, Casselberry, FL, and Orlando, FL. If you’re a few minutes outside the city limits, call and we’ll confirm coverage.
Serving Maitland, FL – Our Local Coverage Area
We’re based in the Maitland area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Maitland
Most non-emergency visits are scheduled within one to two business days. Emergency calls, including a gate stuck open overnight or a motor that won’t close, get priority dispatch. Call (469) 530-2485 and a live person answers, day or night.
If your gate faces the street or sits in a neighborhood with architectural review, your HOA may require approval for a full replacement or a change in material or color. A repair that restores what’s already there usually doesn’t need one. We can write up the scope if your board asks.
Dispatch and scheduling run from our South Florida office, and the crews serving Maitland work locally. The paperwork matters less than the guarantee: written price before work starts, a full-year written warranty on every repair, and a free second visit if anything fails inside that window. Call (469) 530-2485 and we’ll get you on the schedule.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Maitland Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.