Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Conway, FL
Conway is a pocket of Orlando where a lot of homes sit on generous lots with driveway gates that get daily use, and the humidity does not let up. That combination means gate hardware in Conway wears differently than it does a few miles inland or out toward the coast. We are the gate company Conway homeowners call when a swing gate starts dragging, a slide gate jumps its track, or an opener stops responding. From the Conway Acres streets to the shores of Lake Conway, our crews know what stands up to this climate. Call (469) 530-2485 and a live person will answer, day or night.
Why Conway Homes Are Different
Conway sits on sandy, low-lying ground around a chain of lakes. That matters for gates. Gates here sink over time, and a gate that was square five years ago will often be out of level today because the soil has settled unevenly. Hinges bind. Latch posts lean. Slide gates catch on their wheels. We check level and soil movement on every job in Conway, because skipping that step is how repairs fail twice. It is also why we do not just swap a part and drive off – we set the gate up so it works on the ground it is actually standing on.
The housing stock matters too. A large share of Conway homes were built between the 1960s and the 1990s, which means original gate equipment in many backyards, or gates that were added years later without much thought to drainage or power. The humidity and afternoon thunderstorms put real stress on motor boards, wiring, and steel frames. Powder coating fails faster here than inland. Rust starts at welds and spreads under hinges. When we repair a gate in Conway, we are usually correcting years of exposure, not just one broken piece.
Our Main Conway Services
Most calls we take from Conway fall into two groups: a gate that will not open, and a gate that needs replacing. Below is what each job looks like around here.
Gate Repair in Conway
Gate Repair in Conway is our most common call. A gate that drags, sags, or will not latch is a repair job, and in Conway the cause is often sand settling under the post or moisture in the electronics. We carry steel stock, hinges, wheels, and control parts in the truck, so most repairs are completed on the first visit. When you call, we give you the repair price before any work starts, and it holds. If the gate fails inside a year, we come back free.
Gate Installation in Conway
Gate Installation in Conway means a new gate set into ground that shifts. We dig deep posts, brace them, and build for how Conway soil moves. Whether a customer wants a swing gate across a driveway or a slide gate across a wider opening, we measure, quote, order, and install in a straight line. You get a written price before anything is ordered, and the gate is built and set by the same crew that measured it. We also handle power runs, keypads, and safety edges as part of the job, not as afterthoughts.
Gate Motor Repair in Conway
Gate Motor Repair in Conway is about openers that quit, grind, or open halfway. Conway’s humidity gets into circuit boards and limit switches, and afternoon lightning does the rest. We test the motor, the board, the loop detector, and the arm before replacing anything, so you are not paying for parts you do not need. We work on FAAC, BFT, Linear, and Viking motors, among others, and we keep common boards and arms stocked for fast turnaround in Conway.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Conway
Our technicians are trained on FAAC, BFT, Linear, and Viking equipment, along with several other major brands. We keep the most common boards, limit switches, and arm parts stocked locally, so most Conway motor repairs finish in one trip. See our brands for the full list.
Pricing for Gate Company in Conway, FL
| Service | Typical range in Conway |
|---|---|
| Gate repair | $180 – $340 |
| Gate motor replacement | $650 – $1,800 |
| Full gate installation | $1,200 – $5,500 |
| Gate opener repair | $180 – $340 |
| Control board replacement | $225 – $750 |
| Swing arm or actuator replacement | $275 – $975 |
| Loop detector replacement | $225 – $550 |
| Track and wheel replacement for slide gates | $350 – $1,250 |
Conway’s sandy soil tends to add one thing to a repair bill: post-work. When a gate has settled out of level, the post usually needs to be dug, re-set, and concreted before anything else will hold. We tell you about that on the quote, not after the job is open. Every price we give in Conway is written down before work begins, and the number does not change at the door.
Neighborhoods We Serve in Conway
We cover the whole Conway area, from the lakefront streets to the neighborhoods off Michigan Street and Hoffner Avenue. Our crews know these blocks and the gate problems that repeat on them.
- Conway Acres
- Lake Conway Shores
- Bryn Mawr
- Conway Forest
- South Conway
Most Conway calls get a technician on site within one business day. Emergency calls are handled around the clock.
Service Area – Cities Near Conway
We work throughout the broader central Florida area. If you are outside Conway, you may be in one of the nearby cities we serve, including Orlando, FL, Jacksonville, FL, Tampa, FL, and Miami, FL. Call us and we will tell you which crew covers your address.
Serving Conway, FL – Our Local Coverage Area
We’re based in the Conway area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Conway
Most non-emergency calls in Conway get a technician out within one business day. If a gate is stuck open or a vehicle cannot get out, we treat it as an emergency and dispatch around the clock. Call (469) 530-2485 and a live person will tell you the next available arrival window.
Some Conway neighborhoods have HOAs that require approval before a new gate or motor goes in. The rule is not universal across Conway, so check your covenants first. We can help with specs and a written quote to attach to an HOA application if yours requires one.
We cover the full Conway area, from the lakefront properties to the neighborhoods east toward the airport and south toward Belle Isle. Dispatch is coordinated from our Miami office, but the crews that show up in Conway are local to the area and know the ground.
Check the breaker first, and if the gate has a keypad or remote, try the manual release to see if the gate moves freely. If it does not move smoothly, the problem is mechanical. If it moves but the motor will not respond, the problem is electrical. Either way, call us and describe what the gate is doing. We will walk you through what we can over the phone and schedule the right technician for the job.
If your gate is stuck, dragging, or not responding in Conway, call (469) 530-2485 for a written, upfront quote. We answer live, day or night.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Conway Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.