Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Gig Harbor, WA
Carver Gate Repair handles gate repair, gate installation, and gate motor repair for homeowners throughout Gig Harbor, WA. Gates here take a beating from salt air off the Sound, steady winter rain, and the slope-heavy lots that define much of the peninsula. We’re the gate company that shows up with a written price in hand before any work starts, and we back every repair with a 365-Day Done Right Promise. Call (469) 530-2485 any hour, any day. A live person picks up.
This page is the Gig Harbor overview. Each service has its own page below with the full detail, pricing, and specifics.
Why Gig Harbor Homes Are Different
Gig Harbor sits on a peninsula, which means moist marine air moves through nearly every neighborhood. For gate hardware, that translates to corrosion on hinges, limit switches failing sooner than they would inland, and control boards exposed to humidity that shortens their life. We see the same pattern across Artondale, Canterwood, and the shoreline properties along Harborview Drive: rust at the base of swing gates, operators that trip intermittently after heavy rain, and keypads with water intrusion.
The terrain matters just as much. Many Gig Harbor lots slope toward the water or climb away from the road. A gate installed on a grade puts constant load on the operator, especially swing gates that have to fight gravity on every cycle. We set open and close limits accordingly, and we check the mounting plate flex that shows up on gates that have been straining against a hill for years. On steep driveways off Peacock Hill and in the Rosedale area, a well-anchored operator and properly adjusted travel limits make the difference between a gate that lasts five years and one that lasts fifteen.
Housing across Gig Harbor mixes older waterfront homes with newer construction in developments like McCormick Woods. The older gates are frequently LiftMaster or FAAC systems that were installed with the house and have had multiple hands on them since. The newer builds lean toward BFT and Linear operators with keypad entry. Either way, we match the repair to the system already installed rather than pushing a replacement that isn’t warranted.
Our Main Gig Harbor Services
Gig Harbor homeowners call us most for two things: a gate that stopped working, and a motor that quit responding. Each service has its own Gig Harbor page, linked below.
Gate Repair in Gig Harbor
A gate that won’t open or won’t close usually comes down to a bad hinge, a bent track, a seized wheel, or an arm that’s worked loose from the operator. In Gig Harbor, we also deal with corrosion from salt air, which accelerates wear on steel hardware near the water. Our technicians arrive, diagnose the exact failure, and give you a written price before any repair starts. If it’s not done right, we make it right under our full-year guarantee. Full detail on the Gate Repair in Gig Harbor page.
Gate Installation in Gig Harbor
New gate installations in Gig Harbor have to account for slope, setbacks, and the wet soil that makes post depth critical. We measure, quote a written price, and schedule the work so you know the number before we order materials. Whether you’re replacing a tired wooden gate in Artondale or adding a steel driveway gate on a new build in McCormick Woods, the job starts with a site walk, not a guess. See the Gate Installation in Gig Harbor page for the full process and what to expect.
Gate Motor Repair in Gig Harbor
Gig Harbor’s damp air is rough on gate motors. Condensation gets into control boards, sensors corrode, and operators that worked fine all summer start faulting in November. We repair and replace motors across LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Our techs identify the motor or board failure, explain it in plain language, and quote the repair in writing before turning a wrench. The Gate Motor Repair in Gig Harbor page covers motor specifics and pricing.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Gig Harbor
Our Gig Harbor technicians carry parts for FAAC, BFT, Linear, and Viking systems among the nine brands we service. That means fewer return trips and faster turnaround on common motor and board replacements. For the full list of equipment we work on, see our brands page.
Pricing for Gate Company in Gig Harbor, WA
These are the ranges Gig Harbor homeowners typically see for gate work. Your exact price is quoted in writing before any work begins, and that number does not move at the door.
| Service | Typical Range in Gig Harbor |
|---|---|
| Gate repair (non-motor mechanical) | $180 – $410 |
| Gate motor / operator repair | $240 – $575 |
| Gate motor replacement | $875 – $2,400 |
| Gate installation (single swing) | $1,800 – $4,500 |
| Gate installation (double swing) | $3,200 – $7,800 |
| Sliding gate installation | $3,800 – $9,500 |
| Hinge replacement | $95 – $260 |
| Limit switch replacement | $120 – $310 |
| Control board replacement | $260 – $720 |
| Loop detector replacement | $180 – $495 |
What pushes a Gig Harbor repair toward the high end of a range is usually corrosion damage that requires more disassembly, or a slope that puts extra load on the operator. What never changes is the process: written price first, no surprises later, and a written guarantee on every repair for a full year.
Neighborhoods We Serve in Gig Harbor
We cover the entire Gig Harbor area, from the waterfront homes along Harborview Drive to the newer developments east of Highway 16. Our standard arrival window is 1 to 2 hours, and emergency calls get priority dispatch.
- Artondale
- Canterwood
- McCormick Woods
- Peacock Hill
- Rosedale
Service Area – Cities Near Gig Harbor
Our crews serve Gig Harbor as the core area and regularly travel to nearby communities across the Kitsap Peninsula and southern Puget Sound. Dispatch and scheduling are coordinated from the brand’s Seattle office, but the technicians on your gate are local to this market. If you’re in Wauna, WA, Vashon, WA, Port Orchard, WA, or University Place, WA, give us a call to confirm coverage.
Serving Gig Harbor, WA – Our Local Coverage Area
We’re based in the Gig Harbor area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Gig Harbor
For gate failures that leave you stuck in or out of your driveway, we dispatch same-day in most Gig Harbor neighborhoods, with a standard 1-to-2-hour arrival window. Non-emergency repairs are scheduled at the next available opening. Call (469) 530-2485 and a live person will tell you the exact window for your area.
Some Gig Harbor HOAs, particularly in newer developments like McCormick Woods, have design-review requirements for visible driveway gates. City permitting typically applies to new gate posts exceeding certain heights or to electrical work tied to operators. We discuss this on the site walk so there are no surprises after the quote.
Yes. Gate motor repair and replacement include wiring, control boards, safety edges, and loop detectors. We match the operator to your existing power supply, and we quote the electrical scope in writing before work starts. Call (469) 530-2485 for a free estimate on any gate or operator issue in Gig Harbor.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Gig Harbor Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.