Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Lantana, FL
Gate work in Lantana comes down to two things: salt air and older properties. Most of the homes here were built between the 1960s and the 1990s, and their gates and motors have been through decades of coastal humidity. Carver Gate Repair handles gate repair, installation, and motor work in Lantana with written pricing, background-checked technicians, and a full-year guarantee on every repair. If your gate is binding, sagging, or not responding to the remote, call (469) 530-2485 and a live person answers.
Why Lantana Homes Are Different
Lantana sits right on the Intracoastal Waterway, which means the air is damp and salty year-round. That eats at gate hardware faster than you would expect. Hinges rust at the weld points. Swing gate posts loosen in sandy soil. Control boards corrode from condensation inside the housing. A gate that worked fine in a drier town will fail here in a few years without attention.
The housing stock matters too. Lantana has a mix of older single-family homes along streets like Hypoluxo Road and Lantana Road, plus gated communities and condo associations closer to the water. Many of those HOA-governed communities have their own gate requirements. Some specify exact styles or finishes, and a few have architectural review steps before an installation can move forward. We work within those rules, and we will tell you upfront what applies to your property.
What we see most often in Lantana is corrosion-related failure: swing gates that start to drag because the post has shifted in soft ground, slide gates whose rollers have ground down from sand and grit, and older motors whose limit switches or loop detectors have given out after years of humidity. These are not mysterious problems. They are predictable for this climate, and they have specific fixes.
Our Main Lantana Services
Gate repair and gate motor repair are the two calls we get most often from Lantana homeowners. Here is what each one involves.
Gate Repair in Lantana
A gate that will not open or close usually comes down to a handful of causes: a worn hinge, a bent track, a control board that has failed, or hardware that has corroded from the salt air. Our technicians inspect the full system before touching anything, then give you a written price. That number does not move once the work starts. For the full scope of what we fix and what it costs in Lantana, see Gate Repair in Lantana.
Gate Installation in Lantana
New gate work in Lantana often involves HOA style requirements, property lines, and getting the post depth right for soil that can be loose near the Intracoastal. We measure, talk through gate type and material, and give a written price before any work is scheduled. You get a clear breakdown of what is included: post setting, gate hanging, hardware, and any finish work. Details on the process and options are on the Gate Installation in Lantana page.
Gate Motor Repair in Lantana
Most motor failures we see in Lantana fall into three groups: control boards shorted by moisture, limit switches out of adjustment, and loop detectors that no longer sense a vehicle. We carry parts for the major brands and diagnose the issue on site, then give a written price before any component is replaced. If the motor cannot be repaired, we quote a replacement at the same visit. Read more about what we handle on the Gate Motor Repair in Lantana page.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Lantana
We work on Linear, Viking, and DoorKing equipment most often in Lantana, and we keep common parts for those systems stocked so repair work is not held up waiting on a shipment. Most motor repairs are done the same visit. For the full list of equipment we support, see our brands.
Pricing for Gate Company in Lantana, FL
These are the ranges we quote most often for gate work in Lantana. Every job gets a written price before any work starts, so these are a reference point, not a contract.
| Service | Typical range in Lantana |
|---|---|
| Gate hinge replacement | $180 – $320 |
| Swing gate wheel or roller replacement | $150 – $280 |
| Gate lock or latch repair | $140 – $260 |
| Gate control board diagnosis and replacement | $350 – $600 |
| Gate motor replacement (swing) | $700 – $1,200 |
| Gate motor replacement (slide) | $800 – $1,400 |
| Loop detector replacement or installation | $300 – $550 |
| Gate welding repair (per joint) | $120 – $250 |
In Lantana, prices tend to run toward the higher end when the gate hardware is heavily corroded and needs extra grinding or when an HOA requires a specific finish or replacement part. Whatever the job ends up requiring, you will see the full number in writing before we start, and that number does not change at the door.
Neighborhoods We Serve in Lantana
We cover the full Lantana area, including the neighborhoods and communities along the Intracoastal and west of I-95. Most calls get a same-day or next-day visit, depending on the time of day you reach us.
- Hypoluxo Island
- Lantana Pines
- Moorings at Lantana
- Lakeside Point
- Waterway Commons area
Service Area – Cities Near Lantana
Our Lantana crews cover the town and surrounding Palm Beach County communities. We also run crews in other parts of the state, including Miami, FL, Jacksonville, FL, Orlando, FL, and Tampa, FL. Scheduling and dispatch are coordinated from our South Florida office in the Miami area, with local technicians serving Lantana.
Serving Lantana, FL – Our Local Coverage Area
We’re based in the Lantana area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Lantana
Most Lantana calls get a same-day or next-day visit, depending on when you call and how many jobs are already booked. Emergency calls are answered by a live person 24/7, and we will give you a straight answer on the time window when you call (469) 530-2485.
It depends on your community. Some Lantana HOAs require approval before a gate installation or major change, and a few have specific style or finish rules. We will ask about your community when you call and walk you through what is needed before any work is scheduled.
Yes. Every Lantana job gets a written price before any work starts. You approve the number first. That is the whole point of the way we operate: no moving prices and no surprises when the invoice comes.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Lantana Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.