Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Union Park, FL
Gate repair in Union Park, FL typically runs $165 – $540 depending on the failure, and most jobs are completed same day. Union Park’s mix of 1970s through early-2000s homes means our technicians see a lot of swing gates on aging steel posts and motor systems that predate current safety standards. If your gate won’t open, drags on the ground, or the motor hums without moving the leaf, call (469) 530-2485 and we’ll give you a written price before any work starts.
Why Union Park Homes Are Different
Union Park sits on Orlando’s east side, and the soil here holds moisture longer than the sandier ground you find toward the coast. That matters for gates. A gate post set in consistently damp soil works loose faster, and a sagging gate pulls the hinges out of plumb, which strains the motor and shortens its life. We see it on Colonial Drive and in the neighborhoods off Dean Road. The fix usually starts with the post, not the operator.
Most Union Park properties were built between 1970 and 2005. The typical setup is a single swing gate for the driveway or a sliding gate for a side yard. HOA rules vary block by block. Some subdivisions require matching materials and paint; others only care that the gate opens inward and doesn’t block a sidewalk. If your HOA has a standard, we read it before we quote, so the first install is the approved install.
Hurricane season is a working condition here, not a headline. Gate hardware rated for sustained wind, a motor that disengages cleanly, and a frame anchored deep enough to resist ground saturation are not upgrades. They are the baseline in Union Park.
Our Main Union Park Services
Union Park homeowners call us most often about two things: a gate that won’t move and a motor that gave out after a storm. Each has its own page below.
Gate Repair in Union Park
Most gate repairs in Union Park start with a sagging leaf or a hinge that has pulled away from the post. We re-set the post if needed, re-hang the gate, and adjust the operator so the motor isn’t fighting the weight of the gate. Storm damage is common: bent tracks, snapped chains, and control boards that short out after a power surge. We walk you through what failed, what we’re replacing, and what it costs before we touch a bolt. Gate Repair in Union Park covers the full scope of what we fix.
Gate Installation in Union Park
A new gate in Union Park starts with a measure, not a catalog pick. We check the driveway slope, the gate post depth, and whether an HOA spec applies before we recommend anything. Then you get a written price for the gate, the operator, and the install. We handle concrete work, power runs, safety edges, and the first full adjustment cycle. No gates left rubbing. Gate Installation in Union Park lays out what a full install includes.
Gate Motor Repair in Union Park
When a motor clicks but won’t run, or runs but stops mid-travel, the problem is usually the limit switch, a capacitor, or the control board. In Union Park we also see a lot of loop detectors acting up after heavy rain. We bench-test the board, replace what’s failed, and set the travel limits for your exact gate. The motor stays if it is sound; we don’t replace a $600 operator to fix a $40 part. Gate Motor Repair in Union Park details what we diagnose.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Union Park
We work on Linear, Viking, Ghost Controls, and DoorKing systems, among others. That covers the operators installed across most Union Park homes. We carry the common boards, remotes, and limit switches for these brands so a repair doesn’t sit waiting on a part. See our brands page for the full list, including older models still worth repairing.
Pricing for Gate Company in Union Park, FL
| Service | Typical range in Union Park |
|---|---|
| Gate repair, general | $165 – $390 |
| Gate repair, minor hardware | $165 – $220 |
| Gate motor repair | $240 – $540 |
| Gate sensor or safety-edge replacement | $180 – $320 |
| Gate opener repair | $240 – $495 |
| Full gate operator replacement | $520 – $890 |
| Gate opener installation | $490 – $860 |
| Gate install, single swing | $650 – $1,250 |
| Gate install, sliding | $820 – $1,500 |
| Gate repair, same-day service call | $165 – $280 |
What pushes a Union Park job toward the top of these ranges is usually the post, not the gate. A post that has rotted in wet soil or shifted after a storm has to be dug out, re-set, and cured before the gate hangs straight. And on every one of these lines, the number is written down and agreed to before we start.
Neighborhoods We Serve in Union Park
We run calls across Union Park from Colonial Drive down to the neighborhoods near Lake Underhill, and out along Dean Road toward the 408. Typical response is same day when we have a technician in the corridor, and next morning for jobs that come in after dark. These are the areas we see most:
- Palms at Union Park
- Union Park neighborhoods off Dean Road
- Colonial Drive corridor
- McKinnon Groves
- Lake Underhill side of Union Park
Service Area – Cities Near Union Park
Our Union Park crews don’t cross the state, but our dispatch desk in Miami routes calls for the whole region. For gate work elsewhere in Florida, see Orlando, FL, Tampa, FL, Jacksonville, FL, or Miami, FL.
Serving Union Park, FL – Our Local Coverage Area
We’re based in the Union Park area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Union Park
Same day for most failures reported during business hours, and next morning for after-hours calls, as long as the motor or hardware is in stock. Call (469) 530-2485 and we’ll tell you when the technician can be there before you commit to anything.
If your subdivision has an architectural review process, yes. We pull the recorded spec and quote to it, which usually means matching the metal finish and keeping the gate swing off the sidewalk. We don’t file HOA paperwork, but we build to what they approved.
Technicians run Union Park jobs locally. Scheduling and phones are coordinated from our Miami office, so the person who answers at 2 a.m. isn’t a service. The truck at your gate is a Union Park crew, background-checked and uniformed.
If your gate isn’t doing what it should, call (469) 530-2485. You’ll get a live person, a straight answer, and a written price before anything gets taken apart.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Union Park Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.