Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Alamo, CA
Carver Gate Repair is the gate company Alamo homeowners call when a gate stops opening, sags on its hinges, or starts making noise that carries across the yard. Our crews focus exclusively on gates and gate motors, not general contracting, so the diagnosis comes from someone who has seen Alamo’s long driveways, mature landscaping, and oversized custom gates before. We answer the phone around the clock, quote a written price before any work starts, and back every repair with a full-year guarantee. Call (469) 530-2485 and a live person picks up.
Why Alamo Homes Are Different
Alamo is not a tract-home suburb. Properties here sit on larger lots, many of them an acre or more, with setbacks that push gates far from the house and away from the street. That distance shapes the work. A gate at the end of a 150-foot driveway needs a gate motor with more duty-cycle headroom than a courtyard gate in a denser town, and the wiring run to reach it is longer, often through landscaped beds or under pavers. We see that on homes along Stone Valley Road and throughout the neighborhoods off Danville Boulevard, where original 1960s and 1970s ranch gates have been replaced by heavier steel and iron work that weighs two or three times what the original post was set for. Alamo’s dry summers and winter rains also do real work on gate hardware. Sun breaks down the plastic gears and limit-switch housings on older swing operators; rain swells and contracts the soil around gate posts, which is why a gate that latched cleanly in October drags by January. None of this is exotic. It is just the normal life of a gate in this part of Contra Costa County, and it changes which parts we keep on the truck. Most Alamo calls involve swing gates rather than sliders, reflecting the wider lots and the custom ironwork many homeowners have installed. We also run into county permitting rules for substantial changes to gate posts and any new electrical work beyond low-voltage controls, so we talk through those realities before quoting.
Our Main Alamo Services
Three services cover nearly every call we take in Alamo. Each has its own page with local pricing, common failures, and what same-week service looks like.
Gate Repair in Alamo
Most repair calls in Alamo are swing gates that have drifted out of alignment or sagged on their hinges, rollers, and track hardware that has worn after years of daily cycles, or structural posts that have moved in the soil. A repair here means correcting the door’s alignment first and replacing whatever wore out to cause it, not just tightening a bolt and leaving. Gate Repair in Alamo covers the sub-jobs we see most: hinge and roller replacement, post-setting, track and wheel work, drop-bar and latch replacement, and remotes and receivers. Because Alamo’s gates are often heavier custom pieces, we always check the operator’s limit settings after mechanical work so the motor is not asked to push a load it was never sized for.
Gate Installation in Alamo
New gate work in Alamo starts with a site measure: the driveway width at the gate opening, the slope, the distance back to the house, and the existing gate posts or lack of them. Those facts dictate the gate weight and the operator package. We install driveway gates, pedestrian gates, and fence-and-gate runs, and we are just as comfortable hanging a welded steel privacy gate as a lighter aluminum frame matched to existing fence lines. Gate Installation in Alamo explains what a full installation includes, how long the permitting step typically takes in Contra Costa County, and what the work costs. A written price comes before any material is ordered or any footing is dug.
Gate Motor Repair in Alamo
When a gate’s mechanical structure is sound but the operator will not run, or it runs halfway and faults out, the issue is usually in the motor, the control board, the limit switch, or a loop detector. Gate Motor Repair in Alamo covers swing operators, slide operators, and the wiring from the power source to the arm. Alamo’s longer driveway runs mean the low-voltage control wiring can be buried under decades of landscaping, so a no-power symptom is often a broken wire run, not a dead motor, and the repair keeps that possibility in mind from the first test.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Alamo
Our Alamo trucks carry parts for the operators installed most often in the area, including FAAC, BFT, Linear, and Viking, among the nine brands our technicians work on. Stocking the right control boards, limit switches, and arm parts locally means many motor repairs finish on the first trip. See the full manufacturer list on our brands page.
Pricing for Gate Company in Alamo, CA
These are the price ranges our Alamo customers see for common jobs. The written quote you receive before work begins is the number you pay, full stop.
| Service | Typical range in Alamo |
|---|---|
| Standard gate repair (labor only) | $89 – $1,200 |
| Gate checkup and adjustment | $49 – $99 |
| Gate remote replacement | $29 – $59 |
| Keypad installation or replacement | $99 – $179 |
| Loop detector replacement | $179 – $349 |
| Signal amplifier installation | $129 – $189 |
| Battery backup installation | $279 – $449 |
| Driveway alarm installation | $149 – $349 |
| Pedestrian gate opener installation | $699 – $1,499 |
| Swing gate opener installation | $899 – $1,799 |
| Slide gate operator installation | $1,199 – $2,799 |
| Full gate installation | $2,500 – $20,000 |
In Alamo, a heavier custom gate, a longer power run to the house, and any soil work around the posts are the three things that most often push a job toward the top of its range. The quote you see before we start is written, and the number does not move while the work is open.
Neighborhoods We Serve in Alamo
We dispatch to the entire Alamo area, from the homes along Danville Boulevard to the larger properties up toward the Las Trampas foothills and the neighborhoods off Stone Valley Road. Typical response for a repair call is same-day or next-day.
- Stone Valley Road corridor
- Danville Boulevard area
- Alamo Springs
- Bryan Ranch
- Round Hill Country Club area
Service Area – Cities Near Alamo
Our Bay Area dispatch office schedules crews across central Contra Costa County, so the same written-price, full-year-guarantee standard that serves Alamo reaches the surrounding communities too. We also answer calls in Walnut Creek, CA, Moraga, CA, Lafayette, CA, and Danville, CA.
Serving Alamo, CA – Our Local Coverage Area
We’re based in the Alamo area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Alamo
Most Alamo repair calls are reached same-day or next-day. Emergency calls for a gate stuck open or a motor that will not secure the property come first. Call (469) 530-2485 and a live person checks the closest crew’s schedule while you are still on the phone.
Many repairs do not. A full gate replacement, new posts, or new electrical work to the operator can trigger Contra Costa County permit and setback reviews, especially on larger lots. We identify the permit exposure before quoting so there are no mid-job surprises, and we handle the paperwork when a permit is required.
Yes. We serve the full Alamo service area, from Danville Boulevard to the neighborhoods off Stone Valley Road and the hillside lots that need swing operators rated for steeper grades and longer wiring runs. The written guarantee and the written price are the same on every job, regardless of where in Alamo the gate sits.
If your gate in Alamo needs a repair, a motor replacement, or a full installation, call Carver Gate Repair at (469) 530-2485. A live person answers, we schedule a time that works, and the price you see before we start is the price on the invoice. Every repair carries our 365-Day Done Right Promise in writing, and the guarantee is backed by a free second visit if the same issue returns inside the year. Whether it is a sagging hinge on Stone Valley Road or a dead operator off Danville Boulevard, we show up, quote it straight, and fix it.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Alamo Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.