Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Campbell, FL
Gate work in Campbell, FL means dealing with two things most other Florida towns don’t: coastal humidity that eats hinges and circuit boards, and tight lot lines on older Sandpiper Bay homes where a swinging gate has maybe eighteen inches of clearance before it hits a fence or a parked car. We handle gate repair, installation, and motor service here as a specialist, not as a side job for a general contractor. When you call (469) 530-2485, a live person answers and schedules a background-checked technician who works on your gate system every day, not once a month.
Why Campbell Homes Are Different
Campbell sits close enough to the water that salt air is a constant factor. Steel gate frames that last fifteen years inland will show rust at the weld points here in half that time unless they’re prepped and coated for coastal exposure. The homes in this area skew older, many built in the 1970s and 1980s, which means a lot of original swing gates on post footings that have shifted over the decades. When we pull a gate off its hinges in Campbell, we’re as likely to find a corroded post base as a failed hinge bearing. It changes how we quote the job: we price the visible repair and tell you what we expect underneath before we touch anything.
Terrain matters too. Most Campbell lots are flat, which is good for gate travel, but drainage is a recurring theme in neighborhoods like Sandpiper Bay. A gate operator mounted low on a post will sit in standing water after a heavy afternoon storm unless the mounting is raised and sealed properly. That’s a detail we handle as standard practice here because we see it weekly. No HOA in Campbell means homeowners make their own calls on gate style and hardware, which usually means faster decisions and fewer approval delays than master-planned communities to the south.
Our Main Campbell Services
Most Campbell homeowners call us for one of two reasons: a gate that stopped moving, or a gate that was never installed quite right in the first place. Each service has its own page with pricing and specifics.
Gate Repair in Campbell
Campbell’s older gate hardware fails in predictable ways: rusted hinge pins, bowed frames from years of wind load, and operators that quit after a power surge or a lightning strike. We carry replacement hinges, rollers, and limit switches on the truck so most Campbell repair jobs finish same-day. The corrosion factor here means we inspect the entire gate during a repair call, not just the part that broke, and we tell you what’s failing before it fails. Full details are on the Gate Repair in Campbell page.
Gate Installation in Campbell
A new gate in Campbell has to handle coastal air, flat drainage, and older post footings that may need replacement. We quote the full job in writing: new posts set to depth, a frame built for salt exposure, and an operator matched to the gate’s weight and swing. We don’t sell a gate without looking at what it’s hanging from. Most Campbell installations include new post footings because the originals are often thirty years old and undersized. Read the full breakdown on the Gate Installation in Campbell page.
Gate Motor Repair in Campbell
Motor failures in Campbell usually trace back to water intrusion, ant colonies inside the control board housing, or lightning strikes on ungrounded systems. We diagnose first, then quote a written price before opening the operator. In many cases the motor itself is fine and the problem is a limit switch or a loop detector, so the repair costs less than a full replacement. If the board is fried, we match the replacement to the existing unit rather than selling you a new system you don’t need. See Gate Motor Repair in Campbell for pricing and timelines.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Campbell
Our Campbell technicians work on Viking, Ghost Controls, DoorKing, and Elite operators, among others, on a weekly basis. We stock common control boards, limit switches, and remotes for these brands locally, which keeps most Campbell repairs from waiting on a parts shipment. See our brands for the full list and what we carry.
Pricing for Gate Company in Campbell, FL
| Service | Typical range in Campbell |
|---|---|
| Hinge replacement (single gate) | $150 – $350 |
| Hinge replacement (double gate) | $250 – $500 |
| Gate frame repair (bowed or rusted) | $200 – $600 |
| Gate wheel / roller replacement | $120 – $280 |
| Gate opener motor replacement | $450 – $1,200 |
| Control board replacement | $250 – $650 |
| Limit switch replacement | $150 – $350 |
| Loop detector replacement | $200 – $450 |
| Full gate installation (single swing) | $2,500 – $6,000 |
| Full gate installation (double swing) | $4,500 – $10,000 |
| Gate operator installation | $1,200 – $3,500 |
| Service call / diagnostic | $75 – $150 |
Coastal corrosion can push a Campbell repair toward the top of the range if we’re replacing corroded posts or chasing rust through the frame. Your price is written down before any work begins, so the number you approve is the number you pay.
Neighborhoods We Serve in Campbell
We work throughout Campbell and the immediate roads feeding it, with our typical response time running same-day or next-day for non-emergency repair calls. These are the neighborhoods we see most often:
- Sandpiper Bay
- Campbell Park
- Baywood Estates
- Riverview
- The Pines
Service Area – Cities Near Campbell
Campbell sits within our broader Florida coverage area, and we run crews to nearby markets on a scheduled basis. If you’re located outside Campbell proper, see our pages for Jacksonville, FL, Miami, FL, Tampa, FL, and Orlando, FL for local details. Dispatch for the region is coordinated from our South Florida office, with crews serving Campbell directly.
Serving Campbell, FL – Our Local Coverage Area
We’re based in the Campbell area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Campbell
For a gate stuck open or a security concern, we typically reach Campbell addresses same-day. Non-emergency repairs and installations are usually scheduled within one to two business days. Call (469) 530-2485 and a live person will give you a specific window, not a callback promise.
Most Campbell gate repairs and like-for-like replacements don’t require a permit. New installations with new footings or electrical runs may, and we’ll tell you during the quote if yours does. We handle the paperwork if it’s needed.
We cover all of Campbell, from the older streets around Sandpiper Bay to the newer lots on the eastern edge near the county line. Our technicians are dispatched from the South Florida office and work Campbell as a regular service area, not an occasional stop.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Campbell Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.