Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Conroe, TX
Carver Gate Repair is a gate company serving Conroe, TX, focused exclusively on gate repair, gate installation, and gate motor work. Most Conroe homes sit on larger lots than you’ll find closer to Houston, which means longer driveway runs, heavier gate leaves, and more exposure to hard summer sun and spring storms. Those conditions shape the work we do here. If you need a gate fixed, a new one installed, or a dead opener diagnosed, call us at (469) 530-2485.
Why Conroe Homes Are Different
Conroe gates live outside all year. The heat and humidity here are a different animal than coastal air or dry inland climates. We see swing gates sag because post footings settle in Montgomery County’s clay-heavy soil, especially after a wet spring. We see slide gates bind because gate rollers grind against concrete that’s shifted a fraction of an inch. Control boards fail sooner when they’re mounted inside hot metal cabinets with little airflow. These are not exotic problems. They’re just what happens here.
Housing stock matters too. Conroe is a mix of older ranch-style homes on acreage, established neighborhoods like River Plantation and Teaswood, and new construction pushing out toward Willis and Montgomery. A custom iron driveway gate on a property off League Line Road needs different hardware and timing than a builder-grade tube steel gate in a newer subdivision. HOAs in several Conroe communities require gates to match a specific style or finish, which affects repair versus replacement decisions. We quote the job against the actual gate, the actual post, and the actual ground it sits on. Call (469) 530-2485 and we’ll send someone out to look.
Our Main Conroe Services
The calls we get most from Conroe homeowners fall into two buckets: a gate that stopped working, and a motor that quit. Here’s where each one lives.
Gate Repair in Conroe
Gate repair in Conroe usually means a swing gate that’s dragging, a slide gate that’s off its track, or hardware that’s worn past adjustment. We replace hinges, weld cracks, reset posts, and true gate leaves so they close square and latch clean. We work on residential driveway gates and larger property gates, and we quote a written price before any work starts. For the full scope of what we repair and what it typically costs on a Conroe job, see the dedicated page: Gate Repair in Conroe.
Gate Installation in Conroe
New gate installation in Conroe often means a fully welded steel or aluminum driveway gate, sometimes paired with a motor and sometimes manual. We take measurements, check the ground and the posts, and build the quote around your property and any HOA finish requirements. Installation work is scheduled, not same-day, and every job starts with a free measure and a written price. Details and the process are on the dedicated page: Gate Installation in Conroe.
Gate Motor Repair in Conroe
When a gate motor in Conroe stops responding, the fault is usually a limit switch, a loop detector, or a control board cooked by heat. We diagnose the motor and the safety edges, then quote the repair before we touch a wire. Our technicians are trained on the major brands already installed across Conroe, which means fewer return trips and the right part on the first visit. Read the full breakdown here: Gate Motor Repair in Conroe.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Conroe
We service and repair gate motors from Viking, Ghost Controls, and DoorKing, among others. Our trucks carry the common boards, limit switches, and remotes for these systems, so many Conroe repair calls are finished same-day. See the full list on our brands page.
Pricing for Gate Company in Conroe, TX
| Service | Typical range in Conroe |
|---|---|
| Gate repair, minor (hinge, latch, alignment) | $180 – $340 |
| Gate repair, structural (post reset, weld crack) | $350 – $700 |
| Slide gate roller replacement | $220 – $390 |
| Swing gate hinge replacement | $190 – $360 |
| Gate motor diagnosis | $95 – $160 |
| Gate motor repair (limit switch, capacitor) | $240 – $450 |
| Control board replacement | $380 – $780 |
| Loop detector replacement | $290 – $520 |
| Full gate installation (manual) | $2,200 – $5,500 |
| Full gate installation with motor | $4,500 – $9,800 |
Prices in Conroe move up when a gate is oversized, when posts need to be reset in clay soil, or when an HOA requires a specific finish or operator. Every Carver Gate Repair job gets a written price before any work begins. The number we quote is the number you pay.
Neighborhoods We Serve in Conroe
We take gate calls across all of Conroe, including the communities below. Response time in the Conroe area is typically same-day or next-day for repair calls, and we schedule installations around your property’s access needs.
- River Plantation
- Teaswood
- Barton Woods
- Woodland Hills
- Del Lago
Service Area – Cities Near Conroe
Carver Gate Repair serves Conroe and the surrounding communities. If you’re just outside city limits, we likely cover your road too. We also take gate calls in Willis, TX, Pinehurst, TX, Spring, TX, and Tomball, TX. Dispatch and scheduling are coordinated from the brand’s Houston office, with local crews serving Conroe.
Serving Conroe, TX – Our Local Coverage Area
We’re based in the Conroe area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Conroe
We can often reach homes throughout Conroe the same day you call, and most repair appointments are scheduled inside a one to two day window. Installation work is scheduled separately with a free measure first. Call (469) 530-2485 and a live person will give you the next available time.
Several Conroe HOAs require gate styles or finishes to match community standards. We recommend checking your covenants before starting a replacement, and we’ll work from whatever finish or material requirement your HOA has on file.
We serve the full Conroe area, including properties on the outskirts and along the Lake Conroe shoreline. If you’re unsure whether your address is covered, call (469) 530-2485 and we’ll confirm it on the spot.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Conroe Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.