Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Crestline, CA
Carver Gate Repair is the gate company Crestline homeowners call when a gate won’t close, a motor quit, or the old setup needs to come out and be replaced with something that actually works on this terrain. We work exclusively on gates and gate motor systems, and every Crestline job gets a written price before any work starts. Call (469) 530-2485 and a live person answers, day or night. The three things Crestline homeowners ask us most: repair, installation, and motor work – each has its own page below.
Why Crestline Homes Are Different
Gate work in Crestline is shaped by the mountain, the trees, and the roads. Most properties here sit on sloped lots, which means a gate that binds in winter may swing fine in summer as the ground shifts. Post movement is common, and a gate that dragged on the uphill corner last spring will usually drag harder by the next storm. We account for that when we set hinges and align latch hardware, because a plumb install on day one doesn’t stay plumb through a wet season unless the foundation work is right.
The lots are tighter than down the hill, and many gates are the primary pedestrian entry, not just a driveway gate. A Crestline gate gets opened and closed by hand more often in a weekend than a Riverside gate does in a month, so hardware wears differently here: hinges oval, latch strikes loosen, and self-closing springs fatigue fast. Homeowners also deal with deep leaf litter in fall and ice on the gate tracks in winter, both of which finish off worn rollers and under-spec operators.
Permits are generally not required for repairing or replacing an existing gate on the same footprint, but if Crestline homeowners expand a driveway approach or add a new gate where none existed, the San Bernardino County planning office wants plans. Our crews flag that before any tear-out, not after.
Our Main Crestline Services
Two jobs dominate the calls we take from Crestline: a gate that has stopped moving, and a gate system that needs to come out entirely. A third, gate motor repair, usually starts as one of the first two. Each service has its own Crestline page because the scope and price are different enough to matter.
Gate Repair in Crestline
Repair work in Crestline is mostly about keeping an existing gate in service without tearing out the posts. That means welding broken pickets, replacing bent hinges, re-hanging a gate that drags, and fixing latch hardware that has worked loose from years of mountain freeze-thaw cycles. We carry steel, adjustable hinges, and latch parts on the truck, so most repairs finish the same day. If the gate is repairable, we repair it rather than selling a replacement. Full details are on the Gate Repair in Crestline page.
Gate Installation in Crestline
New gate installation in Crestline starts with the post holes, because everything in the mountains rests on how well the posts are set. We auger below frost line where the county requires it, set posts in concrete, then build and hang the gate to clear the slope it lives on. Homeowners choose between steel, aluminum, and wood-look steel, and we handle the site prep, old gate removal, and final hardware. Written pricing is delivered before the first hole is dug. See the Gate Installation in Crestline page for the full scope.
Gate Motor Repair in Crestline
Motor repair in Crestline usually fails in one of three places: the limit switch, the control board, or the drive mechanism. Cold snaps shorten the life of circuit boards, and long uphill approaches burn out swing operators that were sized for flat ground. We open the operator, test the board, replace what’s actually dead, and re-set the travel limits so the gate stops where it should. If the motor is beyond repair, we quote a replacement on the spot. See Gate Motor Repair in Crestline for costs and diagnostic specifics.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Crestline
Our technicians work on the systems Crestline homeowners already have in the ground, including Linear, Viking, Ghost Controls, and DoorKing. We match the board, arm, and parts to the installed brand. Common parts are stocked locally so there’s no multi-day wait for a limit switch or a control board. Full brand coverage is listed on our brands page.
Pricing for Gate Company in Crestline, CA
These are the ranges Crestline homeowners typically see when we quote gate work. The price is set in writing before any work begins, and it does not move at the door.
| Service | Typical range in Crestline |
|---|---|
| Gate repair – minor (hinges, latch, alignment) | $135 – $310 |
| Gate repair – major (welding, re-hang, post remediation) | $325 – $650 |
| Gate operator replacement (swing or slide) | $850 – $2,400 |
| Gate installation – single swing, steel or aluminum | $2,600 – $5,800 |
| Gate installation – double swing, steel or aluminum | $4,800 – $9,600 |
| Slide gate installation | $5,200 – $10,400 |
| Gate motor repair (board, limit switch, drive replacement) | $210 – $560 |
| Keypad or intercom addition | $390 – $900 |
What pushes a Crestline price toward the top of these ranges is access: steep driveways, narrow approaches, and gates set back from the road all add labor hours. Replacing rotted posts adds materials. Every quote includes the full scope, in writing, before we touch the gate.
Neighborhoods We Serve in Crestline
We work across the entire Crestline area, from the lakefront streets to the higher lots off the main ridge roads. Response time runs same-day or next-day for most repair calls, with the mountain access roads adding a little travel time in winter.
- Top Town
- Sandy Bottom
- Weaver / Valley of the Moon
- Cedar Pines Park
- Lake View Point
Service Area – Cities Near Crestline
Our crews cover Crestline and the surrounding mountain and valley communities. Homeowners in Lake Arrowhead, CA call us for the same freeze-related gate failures we see in Crestline. We also serve Highland, CA, San Bernardino, CA, and Running Springs, CA with the same written-price standard.
Serving Crestline, CA – Our Local Coverage Area
We’re based in the Crestline area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Crestline
Most Crestline repair calls are scheduled same-day or next-day. The mountain roads add travel time, but we schedule Crestline calls on the same route to keep arrival windows tight. Emergency calls are answered live by a person at (469) 530-2485, 24 hours a day.
Repairing or replacing an existing gate on the same footprint generally does not require a permit. Adding a new gate where none existed or widening a driveway approach may. We’ll tell you which applies before work starts so nothing surprises you later.
Yes. We run the power feed to the operator, mount the safety edges and photo eyes, and wire the keypad or intercom. The full electrical scope is included in the written price, so you’re not left hiring a second trade after the gate is hung. Call (469) 530-2485 to schedule a free measure.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Crestline Customers Say
"Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W.