Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Dania Beach, FL
Gate repair in Dania Beach, FL typically runs between $180 and $340 for common mechanical fixes, while full motor replacement usually lands between $850 and $1,900 depending on the operator and arm configuration. We’re Carver Gate Repair, and we work exclusively on gates and gate motors across Dania Beach, from the older swing gates off Stirling Road to the newer slide operators on the east side near the marina. If your gate won’t open or the motor’s grinding, call (469) 530-2485 and a live person answers, no voicemail queue.
Why Dania Beach Homes Are Different
Dania Beach sits right on the Atlantic edge of Broward County, and the salt air is the first thing that shows up in gate hardware. We see hinge pins corrode faster here than five miles inland, and limit switches on slide gates accumulate a film of salt and sand that makes them stick. A gate that would run another two years in Davie often needs limit switch replacement in Dania Beach in half that time.
The housing stock matters too. Many homes near the Dania Beach Boulevard corridor are older mid-century builds with chain-driven swing operators from the late 1990s and early 2000s. Those systems were built around AC-powered boards that are starting to fail, and the parts aren’t always on a shelf anymore. Newer construction west of Federal Highway tends toward slide gates mounted on aluminum track, which brings its own problem: sand gets into the track rollers after every heavy rain and the gate starts to bind. Either way, the repair looks different than it would in a gated HOA in Weston or a condo complex in Fort Lauderdale.
We also run into HOA requirements here more than in unincorporated parts of the county. Some Dania Beach communities require a specific gate finish or a matching operator brand when a swing arm gets replaced, and a few require the work to be done during weekday hours only. We’ll help you sort that out before the first part comes off the gate.
Our Main Dania Beach Services
The two calls we get most from Dania Beach homeowners are for gates that won’t open and motors that have burned out, but installation work picks up whenever a driveway gets repaved or a home changes hands. Each service has its own page with detailed pricing and process.
Gate Repair in Dania Beach
Mechanical gate repair in Dania Beach covers hinges, wheels, track, chains, and the physical hardware that moves the gate leaf. The salt air here accelerates rust on exposed steel hinges, especially on east-facing lots within a half mile of the ocean. We replace worn rollers, correct sagging gates, rebuild hinge mounts, and fix latching problems. Most mechanical repairs are finished in a single visit since we carry common Dania Beach hardware on the truck. See the full scope on the Gate Repair in Dania Beach page.
Gate Installation in Dania Beach
New gate installation in Dania Beach starts with a free measure and a written price, because no two driveways here are the same width and the set-backs vary block to block. We install swing and slide gates sized to the opening, set posts in concrete, and hang the gate so it swings true without sagging. Many Dania Beach buyers ask for aluminum or powder-coated steel frames because of the coastal air. Full details, including timing and what’s included, are on the Gate Installation in Dania Beach page.
Gate Motor Repair in Dania Beach
Motor repair here usually means a failed control board, a stripped gear, or a limit switch that quit reading the gate position. Salty air and humidity shorten the life of exposed circuit boards, and we replace them with the correct board for the operator already mounted on your gate, not a universal substitute. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. See the Gate Motor Repair in Dania Beach page for motor-level pricing and brand notes.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Dania Beach
Our technicians are trained on nine gate-motor brands, and in Dania Beach we most commonly service Linear, DoorKing, and Viking operators. Common boards, remotes, and limit switches are stocked on the truck, so many repairs complete the same day we arrive. See our brands for the full list and what we carry.
Pricing for Gate Company in Dania Beach, FL
| Service | Typical range in Dania Beach |
|---|---|
| Gate Repair (common mechanical fixes) | $180 – $340 |
| Gate Motor Repair (board, gear, limit switch) | $250 – $650 |
| Gate Motor Replacement (swing operator) | $850 – $1,500 |
| Gate Motor Replacement (slide operator) | $1,100 – $1,900 |
| Gate Installation (single swing gate) | $2,500 – $5,000 |
| Gate Installation (slide gate) | $3,500 – $7,500 |
| Swing Arm / Articulating Arm Replacement | $350 – $800 |
| Limit Switch Replacement | $150 – $300 |
| Loop Detector Replacement | $200 – $450 |
| Remote / Keypad Programming | $75 – $150 |
What pushes a Dania Beach gate job to the higher end of these ranges is usually the salt-air condition of the existing hardware: a swing arm that’s been in service for a decade near the Intracoastal often needs the mounting bracket rebuilt, not just the arm swapped. Every job gets a written price before any work starts, and that number doesn’t move at the door.
Neighborhoods We Serve in Dania Beach
We cover all of Dania Beach, and our scheduling is coordinated from the brand’s Miami office so a crew can reach most Dania Beach neighborhoods the same day for repair calls. We know the gate styles and common failures in each area:
- Downtown Dania Beach and the area near Dania Pointe
- Melaleuca Gardens
- Lauderdale Isles and the riverfront streets
- Ravenswood Estates
- Dania Beach Highlands and the Federal Highway corridor
Service Area – Cities Near Dania Beach
While this page covers Dania Beach specifically, we run crews through Broward and the surrounding metros. We serve Miami, FL to the south, Jacksonville, FL up the coast, and across the state to Tampa, FL and Orlando, FL. If you’re just outside the Dania Beach line, call and our dispatcher will route you to the right crew.
Serving Dania Beach, FL – Our Local Coverage Area
We’re based in the Dania Beach area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dania Beach
For gate and motor repair calls in Dania Beach, we typically arrive the same day you call, often within a few hours depending on traffic on I-95 and Stirling Road. Installation and full operator replacement are scheduled after a free measure. Call (469) 530-2485 and a live person confirms the arrival window on the spot.
Some Dania Beach HOAs require written approval before a gate or motor is replaced, and a few restrict work to weekday hours. We’ll help you identify what your community requires before we schedule. If a permit is needed, the city process is handled before installation begins.
We cover the entire city of Dania Beach, from the streets off Dania Beach Boulevard to the neighborhoods west of Federal Highway. There’s no trip fee, and the estimate is free. Call (469) 530-2485 to confirm your street is in our route rotation.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dania Beach Customers Say
"Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K.