Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Company in Dixon, CA
Carver Gate Repair is the gate company Dixon homeowners call when a gate stops opening, a motor burns out, or a new gate needs to go in right the first time. Dixon sits in a hot, dry stretch of Solano County where summer heat bakes gate motors and the alkaline soil can shift concrete footings. We work on swing gates, slide gates, and the motor systems that run them, and every job starts with a written price before any work begins. Call (469) 530-2485 and a live person answers, day or night.
Why Dixon Homes Are Different
Dixon runs on a mix of older ranch-style homes near downtown and newer subdivisions spreading east toward Pedrick Road and north toward the I-80 corridor. The housing stock spans forty to seventy years in many pockets, which means we regularly see gate frames that have settled, hinges that have sagged, and motor brackets bolted to posts that were never meant to carry that much weight. Dixon’s summer heat is the bigger issue: daytime highs in July and August routinely pass 95 degrees, and motors mounted without shade or ventilation fail earlier here than they do on the coast.
The soil matters too. Much of Dixon sits on clay-heavy ground that expands when wet and contracts when dry, and that movement pulls concrete post footings out of line over time. A gate that drags or a latch that no longer meets the post is usually a footing issue, not a hinge issue. Homes on larger parcels – especially south of town toward Tremont Road and east along Sievers Road – often run heavier estate gates with longer spans, and those need reinforced posts and properly sized operators. HOA requirements in some of the newer developments also specify gate styles and finishes, and we work with those specs rather than around them.
Our Main Dixon Services
Most Dixon calls come down to two things: a gate that has stopped working, and a motor that no longer responds. All three services below run on the same written-price rule and the same one-year guarantee.
Gate Repair in Dixon
A Dixon gate repair usually starts with the obvious – hinges, wheels, latch – and then moves to the frame itself. Heat and clay soil work against welds and footings over time, and a gate that was hung level ten years ago may not be level today. We check the post alignment, the hinge wear, and the point where the gate meets the latch, then give you a written price for the fix before we touch a tool. Full details are on the Gate Repair in Dixon page, including what a typical repair costs here.

Gate Installation in Dixon
New gate installation in Dixon has to account for the ground it sits on and the heat it will run in. We set posts deeper than code minimums on clay-heavy lots, and we size operators for the gate’s weight and the summer temperatures it will see. Whether it’s a pedestrian gate on a downtown lot or a driveway gate on a two-acre parcel off Currey Road, the process starts with a free measure and a written quote. See Gate Installation in Dixon for what’s included and what to budget.

Gate Motor Repair in Dixon
When a Dixon gate motor quits, the cause is often the control board, the limit switch, or a capacitor cooked by heat. We diagnose the motor before we quote the repair, and we keep common parts for FAAC, BFT, Linear, and Viking operators on hand so most motor repairs don’t wait on a parts order. Every motor repair carries the same one-year written guarantee. Details and pricing ranges are on the Gate Motor Repair in Dixon page.

What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Dixon
Our Dixon techs work on the motor brands most common in this area: FAAC, BFT, Linear, and Viking, along with others. We keep control boards, limit switches, and remotes for these systems stocked on the truck, which keeps most repairs to a single visit. See our brands for the full list of what we service.
Pricing for Gate Company in Dixon, CA
| Service | Typical range in Dixon |
|---|---|
| Gate repair (minor – hinge, latch, wheel) | $150 – $400 |
| Gate repair (major – frame, welding, post reset) | $400 – $1,200 |
| Gate motor repair (control board, limit switch) | $225 – $550 |
| Gate motor replacement | $800 – $2,200 |
| New gate installation (single swing) | $2,000 – $5,500 |
| New gate installation (double swing or slide) | $4,500 – $11,000 |
| Keypad or intercom addition | $300 – $900 |
| Loop detector installation | $350 – $800 |
| Remote programming or replacement | $50 – $150 |
Two things push Dixon prices higher than the bottom of those ranges: long driveway runs that need heavier operators, and post footings that have to be dug out and re-set in clay soil. Whatever the number, you get it in writing before we start – and that written number is the number on the invoice. It does not move.
Neighborhoods We Serve in Dixon
We run calls across all of Dixon, from the older grid streets near downtown to the newer developments east of Pitt School Road and the larger parcels south of town. Most Dixon jobs are reached within the day, and many same-day when the call comes in before noon.
- Downtown Dixon (the original grid, A through F Streets)
- Pitt School Road corridor and newer subdivisions east of it
- South Dixon toward Tremont Road and Sievers Road
- North Dixon near the I-80 corridor and West A Street
- Rural parcels east of Pedrick Road
Service Area – Cities Near Dixon
Beyond Dixon, our crews cover the surrounding Solano and Yolo county area. We run calls into Davis, CA, Vacaville, CA, and Winters, CA, and we also serve Woodland, WA. Scheduling and dispatch are coordinated from our Bay Area office, and the crews serving Dixon are local to this area.
Serving Dixon, CA – Our Local Coverage Area
We’re based in the Dixon area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Dixon
Most Dixon gate repairs are scheduled same-day or next-day. Emergency calls – a gate stuck open with a security concern – take priority, and our phone line is answered by a live person 24/7, including weekends and holidays. Call (469) 530-2485 and we’ll give you a straight arrival window.
If your development has an HOA with architectural guidelines, yes – most require written approval before a new gate goes in, and some specify materials, colors, and height limits. We work off the HOA’s spec sheet when one exists, and the written quote reflects those requirements. No surprises after the fact.
Yes. We service the parcels along Sievers Road, Tremont Road, and the rural roads east of Pedrick Road, where driveway gates are often heavier and run on solar or long power runs. Those jobs are quoted after a site measure, always in writing before any work starts.
If you need gate service in Dixon, call (469) 530-2485 for a free estimate. A live person answers, the price is in writing before we begin, and every repair carries a one-year guarantee.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Dixon Customers Say
"Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F."Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A.





Before
After
Before
After
Before
After