Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Ennis, TX
Carver Gate Repair is the home gate company serving Ennis, TX, and we handle repair, installation, and motor work on residential and light-commercial gate systems. Most Ennis work reaches us through one of three doors: a swing gate that has sagged off its hinges on blackland prairie soil, a slide gate that has jumped its track after heavy weather, or an opener that has stopped responding at the keypad. This page covers what Ennis homeowners should know about gate work in this market, including pricing, neighborhoods, and the local conditions that change how a gate is repaired. Call us at (469) 530-2485 any time.
Why Ennis Homes Are Different
Ennis sits on the eastern side of Ellis County, and the soil here is a factor on nearly every gate job. The blackland clay expands when wet and contracts hard during dry spells, which means a gate post set shallow will lean within a few seasons. We see it on properties along Highway 34 and across the older residential streets near downtown Ennis, where fence lines and gate posts shift enough to throw a gate out of plumb. That movement is the root cause of most binding, dragging, and latch failures in this city.
Ennis also has a real mix of housing stock. The older neighborhoods near downtown have gates and fences that went in generations ago, often with chain-link or tube-steel construction and manual hardware. Newer developments on the south and west sides run to ornamental steel and automatic openers, and those systems deal with a different problem: long, hot summers that age capacitors, circuit boards, and batteries faster than the manufacturer’s typical service interval. Spring storm season adds another layer, with wind gusts and lightning taking out sensors and control boards. A gate in Ennis is not a set-and-forget fixture. It moves with the soil, bakes in the heat, and takes weather head-on.
Our Main Ennis Services
Most calls to Carver Gate Repair in Ennis fall into two sturdy categories: the gate itself has failed, or the motor that moves it has. The three services below are the backbone of what we do in this city.
Gate Repair in Ennis
A gate that scrapes the ground, hangs crooked, or will not latch is a repair job, and in Ennis the cause is usually visible once we level the gate and check the hinges. Clay-soil shifting takes posts out of alignment, and a gate that dragged for months has usually worn the hinge barrels and bent a hinge leaf or two. We quote the work in writing before touching a bolt. Full detail on Gate Repair in Ennis.
Gate Installation in Ennis
New gate work in Ennis means setting posts below the blackland clay’s active zone or they will move. A proper install here starts with concrete depth matched to the soil, not just the gate’s weight, and the difference shows up two years later. We build and hang steel and aluminum gates sized to the opening, whether manual or pre-wired for an opener. Full detail on Gate Installation in Ennis.
Gate Motor Repair in Ennis
Openers in Ennis fail in patterns: a limit switch that no longer stops the gate at the right point, a control board that stopped reading a loop detector, or a battery that died after a lightning storm. We carry parts for most major residential brands and diagnose on site, then give a written repair price before any work is done. Full detail on Gate Motor Repair in Ennis.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Ennis
We work on the gate motor brands most common across Ellis County, including DoorKing, Ghost Controls, and Elite. We carry common control boards, sensors, and remotes for these systems, so most repairs in Ennis do not wait on a shipped part. For the full list, see our brands.
Pricing for Gate Company in Ennis, TX
| Service | Typical range in Ennis |
|---|---|
| Gate repair, minor (hinge, latch, wheel) | $145 – $385 |
| Gate repair, major (weld, post, full alignment) | $400 – $1,300 |
| Gate opener / motor repair | $180 – $520 |
| Circuit board replacement | $275 – $650 |
| Gate installation (single swing) | $1,500 – $4,200 |
| Gate installation (double swing) | $2,800 – $6,500 |
| Slide gate installation | $3,400 – $7,800 |
| New gate operator / motor | $900 – $2,800 |
| Remote / keypad add-on | $120 – $350 |
What pushes a gate job in Ennis toward the high end is access, concrete depth, and what we find when we dig. Blackland clay is heavy to work in, and older posts are often set shallow, so a rebuild costs more than a straight hinge swap. Every price above is a starting range. We put the actual number in writing before any work starts.
Neighborhoods We Serve in Ennis
We run gate calls across all of Ennis and the rural properties on the way in from the county roads. Response inside the city is typically same-day or next-day, and the county properties are scheduled on the same routes. Some of the areas we work in regularly:
- Downtown Ennis and the historic grid around Baylor Street
- The neighborhoods flanking Highway 34 north and south of downtown
- Properties along Lake Bardwell on the west side
- Rural acreage sites off Farm Roads 879 and 1183
- Newer subdivisions on the south side near the high school
Service Area – Cities Near Ennis
We also serve properties in the surrounding Ellis County towns. If your gate is outside the Ennis city limits, we cover Waxahachie, TX, Red Oak, TX, Wilmer, TX, and Lancaster, TX. Scheduling is coordinated from our Dallas-Fort Worth office, with crews dispatched locally to Ennis.
Serving Ennis, TX – Our Local Coverage Area
We’re based in the Ennis area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Ennis
Most Ennis jobs inside the city limits are scheduled same-day or next-day. We answer the phone with a live person 24/7, so you get a real answer on timing when you call, not a callback queue. Rural properties around Lake Bardwell and the county roads are typically the next morning.
For a repair, no. For a new installation, the answer depends on the address and whether the gate is part of a larger fence project. We confirm permit requirements with the city before scheduling an install, and we handle the paperwork if one is required. Nothing is left for the homeowner to chase.
The written price we give before starting is the full job price: labor, parts, and any small hardware the repair needs. If we find something unanticipated after opening a gate operator, we stop and bring you a revised written number before proceeding. The goal is no surprises at the end.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Ennis Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.