Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fairfax, CA
Gate systems in Fairfax, CA take more abuse than most homeowners expect. The town sits against oak-and-bay hills with narrow lots, steep driveways, and weather that swings from wet winter mud to dry summer heat. That combination pushes wooden gates out of square, stresses hinges, and works swing arms harder than flat-land installations. We’re Carver Gate Repair, and we run every Fairfax job to The Garrison Standard: a written price before work starts, background-checked technicians in uniform, and a written guarantee on every repair. When your gate stops opening or starts sagging, call (469) 530-2485.
Why Fairfax Homes Are Different
Fairfax’s housing stock runs older than most of Marin County. Homes along Sir Francis Drake Boulevard and up into the Cascade Canyon and Deer Park areas were built decades apart, which means gate posts range from stout redwood to 4×4 steel set in concrete. Wooden gates predominate, and after a wet Fairfax winter the bottom rails swell and bind against the latch post. That’s the most common call we take here: a gate that used to close cleanly now drags or won’t latch at all.
Terrain changes the job, too. Many Fairfax properties climb, so gate operators work against a slope every cycle. A swing arm rated for flat ground burns out faster on a 12-degree grade. We account for rise and fall when we size motors and set travel limits. Redwood duff, bay leaf litter, and damp soil also clog track channels on slide gates. These are Fairfax conditions, not generic gate problems, and they change how we approach a repair.
Our Main Fairfax Services
Homeowners in Fairfax most often call us for two things: a gate that has stopped working, and a gate that was never installed right in the first place. Each service below has its own Fairfax page with local pricing and specifics. Read the one that matches your situation.
Gate Repair in Fairfax
Sagging hinges, split posts, broken wheels, bent latch bars. Fairfax’s older wooden gates fail in predictable ways, and most repairs take a few hours once we’re on site. We carry redwood shims, heavy-gauge hinges, drop rods, and casters on the truck so we’re not driving back and forth. If your gate scrapes, won’t close, or has pulled away from the post, start here. Gate Repair in Fairfax has local pricing and what to expect on a service call.
Gate Installation in Fairfax
New gates and posts in Fairfax need to be set for the slope and soil you actually have, not a generic spec sheet. Clay-heavy ground expands in winter, so posts need proper depth and concrete collars. We install wood, steel, and aluminum gates, plus full operator systems when you want automation from day one. This is measured and scheduled work, never a rush job. Gate Installation in Fairfax covers materials, site prep, and written quotes.
Gate Motor Repair in Fairfax
If your gate opens but won’t stay open, or the motor hums without moving the arm, the issue is usually a limit switch, a capacitor, or a stripped gear. Fairfax’s damp mornings get into control boards faster than inland heat would. We bench-test motors, replace logic boards, and set travel and force limits so the gate doesn’t slam. Gate Motor Repair in Fairfax explains diagnostic steps and motor replacement costs.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fairfax
We work on all major gate-motor brands, including Linear, Viking, Ghost Controls, and DoorKing. Parts for common failures ship to our Bay Area office quickly, which keeps most Fairfax repairs moving without days of waiting. See our brands for the full list.
Pricing for Gate Company in Fairfax, CA
| Service | Typical range in Fairfax |
|---|---|
| Service call and on-site diagnosis | $89 |
| Gate repair, minor (hinges, latch, wheel) | $150 – $350 |
| Gate repair, major (post reset, frame rebuild) | $400 – $900 |
| Gate motor repair | $250 – $600 |
| Gate motor replacement | $600 – $1,200 |
| Control board replacement | $350 – $750 |
| Limit switch replacement | $110 – $230 |
| Loop detector install or repair | $250 – $500 |
| Full gate installation (single swing, wood or steel) | $1,800 – $4,500 |
| Automation added to existing gate | $900 – $2,500 |
Fairfax pricing runs higher than flatland towns because of drive time, slope work, and older gate hardware that fights back. Whatever the number ends up being, you get it in writing before any work starts. The price is agreed upfront, and it does not move at the door.
Neighborhoods We Serve in Fairfax
We cover the entire Fairfax town limits, from the flats near downtown to the hillside streets that climb toward the open space. Response time runs 60 to 90 minutes for emergency calls in most areas.
- Downtown Fairfax
- Cascade Canyon
- Deer Park
- Bennett Ridge
- Sir Francis Drake corridor
Service Area – Cities Near Fairfax
Beyond Fairfax proper, we run calls into San Anselmo, CA, Kentfield, CA, San Rafael, CA, and Larkspur, CA. Dispatch coordinates from our Bay Area office, so a Fairfax crew reaches all of these towns without a long lead time.
Serving Fairfax, CA – Our Local Coverage Area
We’re based in the Fairfax area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fairfax
Most calls get a technician on site the same day, usually within a couple of hours for emergencies. A gate that won’t close is a security issue, not just a nuisance, so we prioritize those. Call (469) 530-2485 and a live person answers, day or night.
Repairs and motor replacements generally don’t require permits. New installations and post work sometimes do, depending on height and where the gate sits relative to the property line. We handle the check before you commit. If a permit is required, it’s built into the written scope.
Technicians are dispatched from our Bay Area office and serve Fairfax locally. You’ll know the technician’s name before they arrive, and they’ll be in uniform and background-checked. No mystery subcontractors.
If your gate is down, sagging, or stuck, call (469) 530-2485. We’ll give you a straight answer and a written price before any work starts, and every repair carries a one-year guarantee in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fairfax Customers Say
"Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P."Keypad and remotes set up fresh for the whole neighborhood. Done cleanly and quickly."
- Chris W."Straight answers on whether to repair or replace the operator. Repair was the right call."
- Wanda F.