Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fate, TX
Gate work in Fate, TX doesn’t look like gate work in older Dallas suburbs. The housing here is newer, the lots are tighter in the master-planned sections, and the soil shifts with the seasons. That means gate posts settle, swing arms bind, and motors that worked fine in April struggle by August. Carver Gate Repair handles all of it, and we do it with a written price before any work starts. Call (469) 530-2485 if your gate is down today.
Why Fate Homes Are Different
Fate sits on Blackland Prairie clay, and that clay is the quiet culprit behind most of the gate repairs we see here. The soil swells after rain and contracts during dry spells, and over two or three years that movement is enough to pull a gate post a half-inch out of plumb. A gate that’s even slightly out of square will drag on the latch side, strain the hinges, and eventually burn out the motor. We account for that on every job in Fate: we check the post footing before we touch the operator, because replacing a board or a limit switch on a shifting post just means another repair in six months.
Most Fate homes were built after 2005, which means the gates themselves are younger than what we see in Rockwall or older parts of the metro. That’s good news in one way: the steel is usually in decent shape. The bad news is that the motors installed by production builders are often entry-level units that weren’t sized for the gate they’re operating. The housing stock here is also dominated by HOAs, and many have specific rules about gate style, height, and even motor type. If you’re in a community like Monterra or Lakes of Fate, we can work from your HOA’s specifications so you don’t get a violation letter a week after the install.
Our Main Fate Services
Most calls we take in Fate fall into two buckets: a gate that won’t open or close properly, and a motor that’s failed entirely. Each of those services has its own page with full detail.
Gate Repair in Fate
When a Fate homeowner calls about a gate that’s sagging, dragging, or stuck halfway, we treat it as a structural job first and a hardware job second. We check the post, the hinge welds, and the ground clearance before we touch the operator arm or the control board. In Fate’s clay soil, a gate that looks level from the street is often the one that’s moved the most. This is the service for broken welds, bent frames, failed hinges, and gates that work fine manually but fight the motor. Gate Repair in Fate covers the full repair scope for this city.
Gate Installation in Fate
New gate work in Fate means dealing with HOA specs, utility runs, and soil that will test your post footings within a year. We quote the whole job up front: gate, posts, concrete, hardware, and any automation you want now or later. We don’t sell a bare gate and hand you a surprise bill for the operator. If you’re building in a newer section of Fate or replacing a builder-grade gate that’s finally given up, Gate Installation in Fate walks through what’s involved.
Gate Motor Repair in Fate
Most motor failures in Fate come down to one of three things: a capacitor that gave out during a hot stretch, a control board fried by a nearby lightning strike, or an operator that was undersized for the gate from day one. We carry boards, capacitors, and arms for the major brands on our trucks, so many motor jobs are fixed on the first trip. If your keypad beeps but the gate doesn’t move, or the motor hums and stalls, Gate Motor Repair in Fate has the details.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fate
We work on Linear, Viking, Ghost Controls, and DoorKing operators regularly in Fate, and we stock common parts for each. That means fewer second trips and a faster repair when your gate is down. See our brands for the full list of what we service.
Pricing for Gate Company in Fate, TX
| Service | Typical range in Fate |
|---|---|
| Gate repair (minor: hinge, latch, alignment) | $135 – $385 |
| Gate repair (major: frame, post, weld work) | $485 – $1,400 |
| Gate motor repair (capacitor, limit switch) | $185 – $360 |
| Control board replacement | $275 – $615 |
| Swing gate motor replacement | $675 – $1,300 |
| Slide gate motor replacement | $825 – $1,600 |
| Complete gate installation (single swing) | $2,900 – $6,200 |
| Complete gate installation (slide) | $4,200 – $9,000 |
| Keypad or remote programming | $95 – $245 |
Prices in Fate push toward the higher end when soil correction is part of the job, when HOA specs limit material choice, or when the old post footing has to be re-poured. The lower end holds when the gate itself is sound and the fix is hardware or board-level. Regardless of what we find, your written price comes before any work starts, and that number does not move at the door.
Neighborhoods We Serve in Fate
We work across the full Fate area, from the master-planned communities along the I-30 corridor to the acreage properties on the edges of town. Response time for most Fate calls is same-day or next-morning, depending on when you call and the job’s urgency.
- Monterra
- Lakes of Fate
- Woodcreek
- Fate subdivision areas along CD Boren Parkway
- Acreage properties east and south of Highway 66
Service Area – Cities Near Fate
Carver Gate Repair is coordinated from the brand’s Dallas-Fort Worth office, and crews serve Fate locally. We also handle gate work in Royse City, TX, Rockwall, TX, Lavon, TX, and Wylie, TX.
Serving Fate, TX – Our Local Coverage Area
We’re based in the Fate area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fate
Most Fate calls are dispatched the same day if we hear from you before mid-afternoon. Emergency calls for a gate that won’t close or secure the property get priority, and a live person answers the phone 24/7 at (469) 530-2485.
For repairs, usually not. For a new gate or motor that changes the gate’s look or operation, many Fate HOAs require approval first. We can work from your community’s spec sheet if you have it, and we’ll flag anything that looks like a problem before you pay for the work.
Yes. You’ll see the full scope and price in writing before any work begins. If we open the gate and find something unexpected that adds cost, we stop and tell you before going further. You never get a surprise invoice after the fact.
If your gate is down, sagging, or making a noise it didn’t make last month, call Carver Gate Repair at (469) 530-2485 for a free estimate.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fate Customers Say
"Gate hinge was bending under the weight. Welded a new bracket on and re-hung it. Solid now."
- Rudy A."Slide gate wasn't opening fully. Veteran tech found a worn drive chain and a misaligned limit. Fixed both in one visit."
- Don H."Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T.