Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Company in Fort Worth, TX
Carver Gate Repair is a gate company serving Fort Worth, TX homeowners with repair, installation, and motor work. Fort Worth gates take more punishment than most: clay soil shifts with every wet-dry cycle, summer heat cooks motors inside steel housings, and long gravel driveways in areas like Benbrook and Saginaw put real strain on swing and slide operators. If your gate is sagging, dragging, or not responding, call (469) 530-2485 and we’ll send a background-checked, uniformed technician to diagnose it. Every job gets a written price before work starts.
Why Fort Worth Homes Are Different
Fort Worth’s clay-heavy soil is the biggest factor in gate failures we see. When it rains, the ground swells. When the July heat bakes it dry, it contracts and cracks. A gate post set in that soil can lean two or three inches within a few years, which throws off the hinge alignment and makes the gate bind against the latch. Homes in Wedgwood, Ridglea Hills, and Arlington Heights, where many properties date from the 1960s and 1970s, often have original steel gates on piers that were poured shallow by modern standards.
Heat is the second factor. Fort Worth regularly sees 20 to 30 days above 100 degrees each summer. A gate motor mounted in a black steel cabinet on a west-facing wall can reach 140 degrees inside. That heat kills capacitors and control boards faster than anything else. We stock replacement parts for FAAC, BFT, and Linear systems so we’re not waiting on a distributor when a board fails in August. Fort Worth also has a lot of corner-lot homes with side-entry garages, which means the gate is the only way into the backyard. When it fails, the homeowner is locked out of their own yard until it’s fixed.
Our Main Fort Worth Services
Most Fort Worth calls fall into two buckets: a gate that will not open or close properly, and a motor that has stopped responding altogether. Here is what each service covers.
Gate Repair in Fort Worth
Gate repair in Fort Worth usually means correcting sagging hinges, re-welding cracked joints, or realigning a gate that has shifted on its posts. Clay soil movement is behind a lot of these failures, and we account for it when we set new hardware. We carry common hinge sets, roller assemblies, and latch hardware on the truck so most repairs finish in a single visit. If the gate frame itself is rusted through, we’ll tell you honestly whether a repair makes sense or whether replacement is the better use of your money. Read the full breakdown here: Gate Repair in Fort Worth.
Gate Installation in Fort Worth
New gate installation in Fort Worth starts with the soil. We dig posts deep enough to get below the active clay layer and set them in concrete so freeze-thaw and wet-dry cycles don’t move them. We build gates to the width of your driveway and match the material to the house: steel tube frames for modern homes, ornamental iron for older ranch styles, wood-stained steel for homes in areas like Fairmount where appearance matters. Every install includes a written quote before materials are ordered. Details on materials, sizes, and the process: Gate Installation in Fort Worth.
Gate Motor Repair in Fort Worth
Gate motor repair in Fort Worth is often a failing limit switch, a worn articulating arm, or a loop detector that has stopped sensing a vehicle. A limit switch tells the motor when to stop; when it wears, the gate slams or won’t fully close. A loop detector is the buried sensor that opens the gate when a car pulls up. Heat and ant activity are frequent causes of failure. We work on FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, Mighty Mule, and LiftMaster operators, so the parts and the know-how match your system. See more: Gate Motor Repair in Fort Worth.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in Fort Worth
Our Fort Worth technicians carry parts for FAAC, BFT, Linear, and Viking operators, among others. Most common control boards, limit switches, and capacitors are stocked locally, which means a same-week repair instead of a two-week backorder. See the full brand list on our brands page.
Pricing for Gate Company in Fort Worth, TX
| Service | Typical range in Fort Worth |
|---|---|
| Gate sag repair / hinge replacement | $220 – $480 |
| Weld repair on steel gate frame | $180 – $400 |
| Gate post reset / re-concrete | $400 – $900 |
| Gate latch or lock replacement | $120 – $280 |
| Roller assembly replacement | $150 – $350 |
| Slide gate track repair | $250 – $600 |
| Gate motor replacement (basic swing) | $800 – $1,600 |
| Gate motor replacement (slide operator) | $1,200 – $2,400 |
| Limit switch replacement | $140 – $300 |
| Loop detector replacement | $250 – $500 |
| Control board replacement | $300 – $650 |
| Full gate installation (steel, single swing) | $2,200 – $5,500 |
What pushes a Fort Worth job toward the high end of these ranges is access and age. A gate post that has been leaning in clay for years often needs a deeper concrete pour, and a motor that has overheated repeatedly may need a new housing and control board rather than a single part. Whatever the number is, you get it in writing before we start. The price on that sheet is the price you pay.
Neighborhoods We Serve in Fort Worth
We work across the full Fort Worth area, from the older central neighborhoods to the newer developments on the north and west sides. Typical response for most Fort Worth neighborhoods is same-day or next-day, depending on where our nearest equipped truck is at the time of your call.
- Arlington Heights
- Ridglea Hills
- Wedgwood
- Benbrook
- Fairmount
- Saginaw
Service Area – Cities Near Fort Worth
Carver Gate Repair also covers several cities that border Fort Worth. If you live just outside the city line, we likely still get to you on the same schedule. We serve Haltom City, TX, North Richland Hills, TX, Hurst, TX, and Kennedale, TX. Dispatch for all of these areas is coordinated from our Dallas-Fort Worth office, so the crew, the trucks, and the process are the same.
Serving Fort Worth, TX – Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Company in Fort Worth
Most Fort Worth addresses get same-day or next-day service. We schedule a real arrival window and the technician calls when they are on the way. If it is an emergency, like a gate stuck open or a car trapped behind a failed opener, call (469) 530-2485 and we’ll tell you honestly what is possible that day.
Most repairs do not require a permit. Full gate installations sometimes trigger HOA design review, especially in newer subdivisions north and west of Loop 820. We can provide drawings and material specs if your HOA asks for them. The written quote covers the work itself; permit fees, if any, are separate and we’ll tell you upfront.
Yes. Our phone line is answered by a live person 24 hours a day, every day, including weekends and holidays. Weekend scheduling in Fort Worth is common, especially for emergency motor failures. Call (469) 530-2485 for a free estimate and a written price before any work begins.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Fort Worth Customers Say
"Good repair on a motor board. Waited a few days on the part, but they stayed in contact."
- Shelby T."Showed up a little after the window, but he called ahead. On time otherwise, polite, and efficient. Cleaned up all the tools."
- Joan K."Swing gate arm snapped. They replaced the actuator and tested the safety reverse. Fair price."
- Angela P.