Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Allen
A new driveway or pedestrian gate in Allen typically runs $4,800 to $18,000 installed, depending on the gate size, material, operator, and what the soil and HOA rules demand. Most automatic gate installations take 2 to 4 weeks from written quote to final inspection, not because the work is slow but because concrete footings in our clay need proper cure time and masonry columns cannot be rushed. We serve the full Allen market from Bethany Drive to Stacy Road, and our crews know what this town’s HOAs expect before the first hole is dug. Call (469) 530-2485 and a real person answers, day or night.
Why Carver Gate Repair Is Allen’s Preferred Gate Installation Company
Allen homeowners don’t put up with sloppy work. The city runs on HOA covenants, design review boards, and neighbors who notice when a gate sags or a column tilts. Our crew treats every install in Allen as a job that will be inspected by the people living two doors down. Written price before any work starts. Background-checked, uniformed technicians on site. And a 365-Day Done Right Promise in writing on every job, so if something is off a year later, we come back on our dime.
We answer the phone. That sounds basic, but try calling most gate companies at 8pm on a Sunday and see who picks up. A live person answers at Carver Gate Repair 24 hours a day, 7 days a week, including holidays. When an Allen homeowner calls about an install question or a warranty follow-up, they get a human, not a voice mailbox. Lonnie Burke runs our crews to a standard that assumes the homeowner is watching the whole job from the kitchen window.
Our reputation in Allen is built on the unglamorous stuff: showing up when we said we would, leaving the job site cleaner than we found it, and never changing the number once the quote is signed. The Garrison Standard has governed this since 2008, and every Allen install follows it without exception.
Automatic Gate Installation in Allen
Automatic gate installation in Allen means more than hanging a panel and bolting on a motor. It means a concrete footing poured deep enough for our expansive clay, a masonry or steel column set level, an operator matched to the gate’s weight and cycle rate, and UL 325 entrapment protection wired and tested on every open and close cycle. When an Allen homeowner wants a driveway gate that opens from the car without getting out, this is the full scope of work. Expect $6,500 to $18,000 for a complete automatic driveway gate system, operator included.
Operator Selection and Wiring
We install and service operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. The right operator for an Allen home depends on gate length, leaf weight, daily cycle count, and whether the HOA requires the motor concealed inside a column. Wiring is run in conduit, and photo-eyes, safety edges, and keypads are wired before the operator is ever powered up.
Safety and Compliance Testing
Every automatic gate in Allen must pass UL 325 entrapment protection tests before we call the job done. That means the photo-eye beam is aligned, the reverse edge works, and the operator stops and reverses when it meets resistance. We test the full open and close cycle multiple times, then hand the homeowner a written report of what was installed and how it was calibrated.
Gate Installation Services in Allen
Gate installation services in Allen cover driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates. A manual single-swing driveway gate with steel frame and wood infill typically runs $4,800 to $8,500. A double swing gate with automatic operator starts around $8,000 and climbs with size and finish. These are real Allen numbers, quoted in writing before any concrete is poured.
Driveway, Swing, and Slide Designs
Driveway gates in Allen are often HOA-mandated to match the home’s brick or stone. That means a steel or wood gate dressed in stone veneer or cedar, mounted on a masonry column. Sliding gates fit properties with a long flat run of fence line. Swing gates work where the driveway opens wide enough for two leaf panels to fold inward or outward. We measure the actual opening, check slope, and recommend the design that fits the site, not the one that photographs best.
Security Gate Integration
Security gates in Allen frequently tie into existing access control: keypad, intercom, or even a phone-based entry app. We wire the new operator to the existing keypad when it’s compatible, and replace the keypad when it’s not. Every install includes a manual release so if power fails, the gate can still be opened by hand. That’s not an add-on. It’s part of the job.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Allen
We work on nine gate-motor brands, and we stock common parts for Linear, Viking, Ghost Controls, and DoorKing on our service vehicles. That means an Allen install does not stall for three weeks while a part ships from a warehouse. We carry limit switches, loop detectors, photo-eyes, and edge sensors for the systems our Allen customers already own. When a Homeowner’s existing operator is worth keeping, we’ll tell them straight. When it’s not, we quote a replacement from the same brand or an equivalent, and we explain the tradeoff in plain English.
Common Gate Installation Problems We See in Allen Homes
- Post rotation in Blackland clay. Allen sits on expansive clay that swells when wet and shrinks in a drought. A gate post set in a shallow footing will slowly rotate, pulling the gate leaf down and out of alignment. The fix is a deeper footing with rebar, not just another bag of concrete.
- HOA masonry columns on undersized footings. Brick and stone columns are heavy. When the footing is too shallow, the column settles or tips, throwing the gate operator and safety photocell out of alignment. We plan the footing for the full column load, not just the gate. Allen HOAs require masonry columns in many neighborhoods, so this matters.
- Operator and safety-edge mismatch. Installing an operator without testing the UL 325 entrapment protection means a gate that reverses mid-travel or jams against the stop. We test every cycle, not just the first one. A gate that fails the safety check doesn’t pass inspection with us.
- Concealed operator fitment. Allen HOAs often mandate that gate operators be hidden inside a column or behind a stone facade. That changes the column’s internal dimensions and the mounting hardware. We plan for concealed operators from the first measurement, not as an afterthought once the masonry is up.
Pricing for Gate Installation in Allen, TX
A manual single-leaf driveway gate in Allen runs $4,800 to $8,500 installed. A double swing gate with automatic operator starts around $8,000 and can exceed $18,000 for a large two-leaf system with concealed operator, masonry columns, and access control integration. Pedestrian gates are a smaller job, typically $1,800 to $4,500. What moves the number in Allen is footing depth and masonry work, which the clay and HOA rules both push toward the higher end. The price we quote is written before work starts, and it does not move at the door. Call (469) 530-2485 for a free estimate on your specific gate.
We Also Serve Cities Near Allen
Carver Gate Repair runs our Gate Installation crews from Allen into Plano, McKinney, Wylie, and Sachse. If you’re in one of those cities and need a gate built or an operator installed, same written pricing and same 365-Day Done Right Promise apply. Call the same number and a live person answers.
Serving Allen, TX – Our Local Coverage Area
We’re based in the Allen area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Allen
A complete automatic gate installation in Allen typically takes 2 to 4 weeks from signed quote to final walkthrough. Same-day turnaround is not possible on a new install because concrete footings in Allen’s expansive clay need proper cure time before a gate post or masonry column can carry load, and rushing that step is exactly how posts rotate and gates sag. You should get a written schedule at the quote stage: demolition, footing dig and pour, cure, column and gate install, operator wiring, and safety testing. Call (469) 530-2485 to get a written timeline for your specific project.
Allen’s Blackland Prairie clay expands when wet and shrinks when dry, which means a shallow footing will heave and rotate a gate post within a few seasons. We specify deeper footings with rebar reinforcement, and on heavy masonry columns we sometimes recommend engineered piers. That adds $400 to $1,200 to a typical install compared to a city with sandy soil, but it’s the difference between a gate that stays square for 20 years and one that drags in year three. In Twin Creeks off Bethany Drive, we pulled a five-year-old swing gate whose hinge post had rotated in the clay enough that the LiftMaster operator hit its hard stop every cycle. The fix was a deeper rebar-reinforced footing, a reset pressure-treated 6×6 post, and fresh concrete. The operator then ran smooth.
Yes, in most Allen neighborhoods you need HOA design review approval before installing a new gate or replacing a visible gate, and a city permit is often required when electrical work or a new driveway access point is involved. Allen HOAs frequently mandate masonry columns, concealed operators, and specific gate materials or colors. Our crews work from the approved design, and we can walk you through what your specific HOA requires. Call (469) 530-2485 before your design review meeting, and we’ll help you submit something that gets approved the first time.
We install and service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule operators in Allen. If your existing keypad or intercom is compatible, we wire the new operator into it and keep your current entry codes. If it is not, we quote a replacement keypad or control board and explain why. Every install includes a manual release so the gate can be opened by hand during a power outage.
UL 325 is the safety standard that requires automatic gates to have entrapment protection such as photo-eyes and reversing edges, and to stop and reverse when the gate meets resistance. A gate without working entrapment protection can crush a child, a pet, or a vehicle. We test photo-eyes and edge sensors on every cycle and document the test before we consider the job done. If a contractor skips this step, the gate is not code-compliant and your homeowner’s insurance may not cover an injury.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Allen, TX with gate installation and gate motor repair to The Garrison Standard.