Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Benbrook
Gate installation in Benbrook typically runs $2,400 to $7,800 depending on the gate type, operator, and whether power needs to be trenched to the driveway line. Most single swing gate installs here land between $3,200 and $5,400 with the opener included, and a full custom double-drive gate with automation can push past $9,000 when soil work is required. That’s the honest range before anyone steps onto your property. Our crews work Benbrook neighborhoods like Westpark, Timber Creek, and the acreage lots off Bellaire Drive South regularly, and we coordinate every job through one live-answered line: (469) 530-2485.
Benbrook isn’t just another corner of Tarrant County. The soil here moves, the housing stock spans five decades, and a gate that was installed cheaply in another metro won’t survive two summers of Benbrook clay. We build for that reality. The price is written before work starts, the crew shows up background-checked and uniformed, and the installation is covered by the same 365-Day Done Right Promise we put on every job since 2008. If you want a gate that swings true and closes on its own without daily fuss, you call a team that does gates and nothing else.
Why Carver Gate Repair Is Benbrook’s Preferred Gate Installation Company
We’re Gate Installation specialists first. That matters in Benbrook because general contractors don’t know what Benbrook clay does to a hinge post, and handymen don’t stock parts for Ghost Controls or Viking operators. We do. Our technicians arrive with the right components in the truck because we service these systems every week across Benbrook and the surrounding Tarrant County communities. No second trip for a forgotten bracket, no “I’ll order that part” text at 2 p.m.
Every technician on a Benbrook job is background-checked, uniformed, and works to The Garrison Standard. That standard means a written price before any work begins, a site left clean when the job is done, and a full-year guarantee in writing on every installation. Homeowners who have been burned by no-shows and moving prices tell us that’s what finally made them stop dreading the phone call. Our phones are answered by a live person 24/7, including weekends and holidays. You call, a person picks up, and we schedule around what’s actually happening at your property.
Lonnie Burke runs our installation crews with the same rule he’s held since 2008: if it’s not done right, we make it right. That’s the 365-Day Done Right Promise, and it’s not marketing language. It’s a written guarantee on every install, and if something fails inside the year, the second visit is free. No charge, no argument. Benbrook homeowners don’t need another gate company that disappears after the check clears. They need one that’s still accountable in 11 months. That’s the whole point.
Gate Opener Installation in Benbrook
Gate Opener Installation in Benbrook usually means mounting an operator on an existing gate that was built years before anyone thought about automation. The job involves setting the operator, running a low-voltage circuit or confirming solar viability, wiring safety photocells, and testing the automatic reversal until it stops cleanly against an obstruction. In Benbrook, a basic single-swing opener install runs $1,400 to $2,800 when power already exists at the gate line. If we’re trenching power from the house, expect $2,800 to $4,900 total. A new slide gate opener installs for $2,200 to $4,600 depending on the run length and the motor’s duty rating.
Retrofit Opener on an Existing Gate
Most Benbrook homes built before 2010 never had a low-voltage circuit pulled to the driveway. That’s the first thing we check because it’s the most common delay on a retrofit. We test the existing post strength before mounting anything. A gate that’s been sagging in clay for five years will bind under an operator, and no motor fixes a footing problem.
New Opener With Full Automation Package
When we install a new operator as part of a full gate build, the package includes the motor, photocells, a keypad, and two remotes. We hardwire a loop detector when the driveway design calls for it and test the auto-reverse with a 2×4 before we call the job done. If the gate ever fails inside the guarantee window, the repair visit is free.
Gate Fabrication in Benbrook
Gate Fabrication in Benbrook covers building the gate itself when an off-the-shelf panel won’t fit the opening or match the house. A custom steel frame gate for a single driveway runs $1,800 to $4,200 here. A double-drive custom gate with welded pickets and a steel frame runs $4,500 to $9,000 depending on width, height, and weight. The heavier the gate, the more the operator has to work, and the more important the footing becomes. We weld to the actual measurements of your driveway, not to a catalog spec.
Custom Driveway Gates
Driveway gates in Benbrook often span wider than the 12-foot openings common in newer construction. A 16-foot double swing gate out near Timber Creek Creek has a lot of leverage on its hinge posts, and we design for that load. We fabricate the frame in steel, weld or bolt the infill to match your fence line, and hang it level on day one.
Pedestrian and Security Gates
We also fabricate smaller pedestrian gates and reinforced security gates for side yards and alley access. These jobs run $900 to $2,600 depending on the height and the locking hardware. Any pedestrian gate with a self-closing hinge mechanism should be tested for closing speed, which we do as standard before leaving the site.
Trusted Brands We Service in Benbrook
We work on Ghost Controls, Viking, and DoorKing equipment most often in Benbrook because those are the three brands we see installed most commonly across Tarrant County driveways. We stock their common parts locally, which means a repair on an existing opener usually happens in one visit. If you already have a LiftMaster, FAAC, BFT, Linear, Elite, or Mighty Mule system, we service those too. Our team is trained on nine major gate-motor brands so the right parts and the right know-how get matched to the system already on your gate. No one in Benbrook should wait a week for a board that’s sitting in our truck.
Common Gate Installation Problems We See in Benbrook Homes
- Post footing movement in expansive clay. Benbrook’s older residential pockets frequently mix expansive clay soils with undersized original post footings, so many new gate installs here fail at the ground line before the operator ever wears out. We set deeper footings with proper drainage so the gate stays plumb through wet and dry cycles.
- No low-voltage circuit at the gate. Older Benbrook homes often lack a dedicated low-voltage circuit at the driveway, so an opener install stalls on power runs and trenching rather than the motor itself. We inspect the power access during the estimate and price the trench honestly.
- Phantom opens from nicked loop detector wiring. Loop detector wiring gets nicked during driveway rework or landscape edging, producing phantom opens on a freshly installed slide gate. We test the loop before and after setting the gate, and we run the wire in conduit to prevent the next edging job from cutting it.
- Operator strain from an out-of-plumb hinge post. A gate that’s binding at the hinge will burn out a new opener’s gears within a season. We level the gate and reinforce the hinge post before mounting the motor, which is why our installs don’t come back for bent arms and stripped gears.
Pricing for Gate Installation in Benbrook, TX
Gate installation in Benbrook runs $2,400 to $7,800 for most residential jobs. A single swing gate with a basic opener: $3,200 to $5,400. A double-drive custom gate with automation: $4,500 to $9,000. Retrofit opener only: $1,400 to $2,800 when power is already at the gate. The soil work is what moves the number here. If we’re pulling a post and setting a deeper footing because the original is swimming in clay, that adds $400 to $900 per post depending on depth and access. The price you’re quoted is the price you pay. It’s written before any work starts, and it does not move at the door. Call (469) 530-2485 and we’ll send a technician to measure, inspect the soil and power access, and hand you a written price. Estimates are free.
We Also Serve Cities Near Benbrook
Our crews cover Benbrook and the surrounding metro, including Fort Worth, Dallas, San Antonio, and Houston. If your property sits outside the Benbrook city line, we still dispatch locally and schedule around your availability. One call to (469) 530-2485 gets the same written price and the same full-year guarantee, wherever you are in the region.
Serving Benbrook, TX – Our Local Coverage Area
We’re based in the Benbrook area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Benbrook
A typical single swing gate installation in Benbrook takes one to two days once the concrete has cured. Custom fabrication adds one to three weeks depending on our welding schedule and your gate’s dimensions. Soil work, trenching, and weather can extend the job, but we give you a written timeline with the estimate and we stick to it. Call (469) 530-2485 for a schedule based on your actual driveway.
Yes, we install openers on existing gates in Benbrook all the time, provided the hinge posts are still structurally sound and the gate swings without binding. We check the post, the hinges, and the power access during the free estimate. If the post has moved in clay, we’ll tell you before we mount a motor, because the operator will fail early on a sagging gate. Call (469) 530-2485 to schedule a measurement.
A new automatic gate in Benbrook should have UL 325 compliant automatic reverse, photocells at the opening and closing edges, and a manual release for power outages. We test the reversal with a 2×4 obstruction before we leave, and we set the force limits so the gate stops instead of crushing. Pedestrian gates with self-closing hinges need closing-speed checks too. Every install we do includes this testing as part of the written price.
Phantom opens on a new Benbrook gate are almost always a loop detector wiring issue or a frequency conflict with a neighbor’s remote. We run loop wire in conduit and test the detector before finalizing the install. If the gate still opens on its own inside the guarantee year, the second visit is free. Call (469) 530-2485 and we’ll trace the circuit.
Yes, we fabricate custom driveway, pedestrian, and security gates for Benbrook properties in our own shop, built to your actual measurements. Custom gates run $1,800 to $9,000 depending on size, material, and whether we’re also installing an opener. We weld the frame, set the infill to match your fence line, and hang it level on a footing sized for Benbrook’s soil. Call (469) 530-2485 for a free measure and written quote.
Clay Soil and Gate Footings: What Benbrook Homeowners Need to Know
Benbrook sits on expansive clay that shrinks in drought and swells after rain. That movement is why so many gate installations here fail at the ground line, not at the hinge or the motor. A post set in a shallow, narrow footing will heave out of plumb within a season, and then the gate binds, the operator strains, and the whole system starts wearing unevenly. We set footings deeper here than we would in sandy soil, and we add drainage so water doesn’t pond against the post base. This is the single biggest difference between a Benbrook gate that works for a decade and one that’s sagging by October.
We installed a Ghost Controls solar gate opener on a double-drive swing gate off Mercedes Street after the original hinge post had twisted in moving clay. Our crew pulled the old post, set a deeper footing, mounted the new operator, and tested the safety photocell and automatic reversal until it stopped cleanly against a 2×4. The gate now swings level and closes reliably without the owner’s daily push. That’s the job done right, and it’s what the 365-Day Done Right Promise stands behind.
Call (469) 530-2485 today to schedule your free gate installation estimate in Benbrook. A live person answers, the price is written before we start, and the work is guaranteed for a full year.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Benbrook since 2008.