Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Burleson
A new Gate Installation in Burleson typically runs $2,400 to $7,800 for a complete automatic driveway gate, including the operator, safety sensors, and the ground work to keep the posts where they belong. For a welded steel single swing gate with a basic keypad, most Burleson homeowners land around $3,200 to $4,500. We quote the full job in writing before any work starts, so the number you approve is the number you pay. Call (469) 530-2485 and a live person answers, day or night.
Burleson’s black clay soil is the thing you won’t hear about from a catalog. We know it because we dig in it. Gate posts here heave and shift between spring rain and August heat, which means an installation that skimps on the footing will fail inside a year no matter how good the gate panel is. We build for that ground.
Why Carver Gate Repair Is Burleson’s Preferred Gate Installation Company
We work on gates. That’s the whole job. Not fences, not landscaping, not general contracting. Gates and gate operators, across nine major motor brands, every day of the week. Our technicians arrive in uniform, background-checked, and they know a limit switch from a loop detector without glancing at the manual.
Every Gate Installation in Burleson job we take gets a written price before the first tool comes off the truck. That price holds. The crew hauls off the old gate, the old footing, and the packaging. We don’t leave a mess for you to deal with on Saturday morning.
You may not know the name Gate Repair – Burleson yet. You may know the problem: a gate that worked fine for two years and now drags the driveway after every rain. That’s the clay moving the post. We fix the footing, not just the symptom.
Our phones are answered by a person, 24 hours a day. Not a voicemail box. Not a call-back list. If you need a gate job priced in the Alsbury, Hidden Vistas, or Greenridge Estates areas, call (469) 530-2485 and we’ll schedule around your day, not ours.
Gate Fabrication in Burleson
Gate Fabrication in Burleson means building the gate to the opening, not pulling something off a rack and hoping. When a house has an odd driveway width, a slope, or an existing brick column that’s out of plumb, custom fabrication is what makes the gate hang square and seal the way it should. The materials are cut and welded here, to the measurements we take on your property. You don’t pay for standard sizes. You pay for what fits your posts and your driveway.
Steel fabrication for a single swing gate in Burleson, fully welded with hinges and a latch plate, generally runs $900 to $2,100 depending on the height and the amount of steel. That’s the fabricated gate panel. It does not include the operator, the concrete work, or the electrical run. Those are separate line items we show you line by line in the written quote.
Nothing about that price is a secret until the invoice. We walk you through it before we start: steel gauge, post size, hinge hardware, coating. A heavier gauge panel costs more up front and rattles less in a Texas windstorm ten years later. We show you both numbers and you choose.
Most homeowners in Burleson with a gate that’s rusted through along the bottom rail choose fabrication over patching. You can weld patches onto rusted square tube and get one more season, or you can replace the gate once and have a panel that drains water instead of holding it. Every fabricated gate we build gets drain holes, a primer coat, and hinge points reinforced at the stress corners. That is the difference between a gate we warranty for a year and a gate that follows you around as a problem.
Custom Swing Gate Fabrication
A custom swing gate starts with the hinge side. We anchor new steel posts in deeper concrete footings, set the hinges at the right standoff from the column, and build the panel to swing through its full arc without binding on the driveway grade. On gates with a slope, that means a rake cut along the bottom rail so the panel follows the ground instead of scraping it.
If you want the gate to match an existing fence or a brick column, we match the top line and the picket spacing rather than forcing an off-the-shelf design onto the house. That attention to detail costs the same as doing it badly and gives you a gate that looks like the builder did it, because in practice that’s what we’re doing.
Pedestrian Gate Setup
A pedestrian gate handles a much lighter daily load than a driveway gate, but the post is still in the same clay. We dig the same proper footing, set the same galvanized hinge hardware, and build for the same ground movement. A sagging walk gate on Willow Creek Drive is almost always the post, not the gate.
Where possible we match the pedestrian gate’s lock height and hinge layout to the driveway gate at the same property, so the two don’t look like they were installed in different decades.
Automatic Gate Installation in Burleson
Automatic Gate Installation in Burleson means more than bolting a motor to a gate. The job includes the operator, the safety photocells, the edge sensor or reversing mechanism, the keypad or remote receiver, the loop detector if you want the gate to open for a car leaving the driveway, and the wiring or solar panel that powers all of it. Every automatic gate we install is tested for reversal force and sensor response before we call the job done. That is not optional. Entrapment protection is required by code and we treat it that way.
A full automatic gate install in Burleson, with a new fabricated gate panel, a lift-master or FAAC operator, two safety photocells, a keypad, and a deep post footing, typically runs $4,200 to $7,800. The operator by itself, installed on an existing gate that’s in good shape, usually lands between $1,600 and $2,400 depending on the brand and whether we need to run conduit to the house. Solar setups add $500 to $1,200 over a direct power run because you’re paying for the panel, the charge controller, and a battery that gets changed every few years. We quote all of it in writing before we start.
Swing Gate Operators
Most Burleson driveways were built with swing gates, and we install more swing operators than anything else. The operator mounts on the hinge post and moves the gate through an articulating arm, so the arm needs clearance and the post needs to stay exactly where we set it. A swing gate operator that worked fine on a new post is the same operator that fights you when the clay shifts that post two degrees.
We size the operator for the gate’s weight and wind load, not for the cheapest package that fits. An undersized motor burns out the limit switch in the first season, and then you’re paying for the repair a good install would have avoided. Homeowners who went cheap on the first motor call us when the second one dies.
Slide Gate Operator Options
A sliding gate removes the swing arc problem, which means it’ll work better than a swing gate on a steep driveway or a narrow gooseneck. The trade is that the track and the rack need to stay clean, and the gate needs a flat, level path to travel. Burleson soil that heaves in wet spring can push the track up, so we pour a continuous footing under the full slide path instead of just setting a few pads.
We install slide operators from FAAC, BFT, and Viking. Those are belt and chain drive units built for the weight and cycle count of a real driveway gate, and we stock parts for them locally. A slide operator with a new track and safety edge on an existing gate usually runs $2,800 to $4,000.
Trusted Brands We Service in Burleson
We work on nine gate-motor brands, including FAAC, BFT, Linear, and Viking. That matters in Burleson because the gate you already have, the one the builder dropped in ten years ago, was probably not chosen by you. It was chosen by the cheapest quote. So when we show up to repair or replace it, the conversation isn’t “we don’t touch that brand.” It’s “we know exactly what’s failing and we have the part.”
We stock common drive belts, limit switches, loop detectors, and control boards for brands we see most in the DFW market. If your BFT swing operator fails in Hidden Vistas on a Thursday, we can usually be out the next morning with the part on the truck.
Common Gate Installation Problems We See in Burleson Homes
This is the list we work through when a Burleson homeowner calls us about a gate that isn’t right. Most of them trace back to the soil, the footing, or a shortcut that was made long before the gate panel ever showed up.
- Post heave from expansive clay. Burleson’s black clay swells after spring rain and shrinks in the summer dry, and a shallow concrete footing moves with it. We see swing gates on the Alsbury corridor where the panel leaned a full inch within eight months of install. The gate hardware was fine. The footing wasn’t deep enough.
- Re-used operators without UL 325 safety. A homeowner asks if we can hang a new gate on the old motor to save money. We won’t wire an automatic gate without working photocells and a reversing edge. It’s a code requirement and a basic safety question. A gate that’s closing and can’t tell the difference between a garbage bin and a child is not an install we’ll put our name on.
- Rack-and-pinion drift after a freeze cycle. A slide gate runs smooth the week it’s installed, then starts grinding in February. The post footing and the guide rail settle differently, and the rack walks out of alignment. We re-bed the rail and re-time the rack rather than just greasing it and hoping.
- Undersized swing operators on heavy gates. A builder’s-grade operator that was rated for a 300-pound gate on a 600-pound gate will fail at the limit switch first, then burn the motor. We size the operator to the actual gate weight and wind face, and we show you that math in the quote.
Pricing for Gate Installation in Burleson, TX
For a plain steel single swing gate with no automation, you’re looking at $2,400 to $3,800 installed in Burleson, including the post footing and hinge hardware. Add an automatic operator and the safety package, and that same gate lands between $3,900 and $5,500. A full custom double swing gate with a lift-master operator, keypad, safety sensors, and concrete ground work runs $5,800 to $7,800 depending on the driveway width and how much fabrication is required.
A gate operator only, new, on an existing steel gate in good condition: $1,600 to $2,400. A new slide track and rack on an existing slide gate: $900 to $1,600. We give you the line items, the brand, and the footing specs in writing before any work starts. Estimates are free. Call (469) 530-2485 and Lonnie Burke will get you a written number.
We Also Serve Cities Near Burleson
If you’re just outside the city limits, we handle gate work in Crowley, Joshua, Alvarado, and Kennedale the same way we work Burleson. Same written prices, same background-checked technicians, same live phone answer. Dispatch and scheduling are coordinated from the Dallas-Fort Worth office, and our crews cover Burleson and every neighboring city on regular routes.
Serving Burleson, TX – Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Burleson
Most single swing gate installations finish in one full day in Burleson, but the concrete footing needs a day or two to cure before we hang a heavy gate or an automatic operator on it. We schedule the footing pour, return when the concrete has set, and then mount the gate, the operator, and the safety sensors. A double gate or a full slide track job is usually two days. We don’t promise same-day for an install because the concrete won’t let us do it right. Call (469) 530-2485 and we’ll schedule a firm arrival window.
Almost always, the post footing wasn’t deep enough for Burleson’s expansive clay. The clay swells in wet spring and shrinks in the dry summer, and a shallow footing rides that movement. You’ll see the gate panel lean or drag the driveway within a season. We pull the old footing, pour deeper concrete, and reset the post. That’s the fix. Shimming the hinges will not solve it.
Yes. Every automatic gate installed in Burleson must meet UL 325 entrapment protection requirements, which means minimum two safety photocells and a reversing edge or force setting that stops and reverses the gate on contact. We test reversal before we finish the install. We will not wire an automatic gate without working safety devices. It’s code, and it’s ground truth.
We install and service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. For Burleson residential work we install a lot of FAAC swing operators and BFT slide operators because they’re reliable and we keep parts for them locally. We match the operator to the gate’s weight and the driveway layout, not to whatever was on sale that week. Call (469) 530-2485 for a written recommendation based on your gate.
A new automatic gate in Burleson, fabricated and installed with the operator and safety gear, runs $4,200 to $7,800 for a single driveway gate. A double gate costs more in steel and operator capacity, usually $6,500 to $9,000. The operator on an existing gate is $1,600 to $2,400. We give you a written line item quote before any work starts. Call (469) 530-2485 for a free estimate.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Burleson and the surrounding area with gate installation, gate repair, and gate operator work built to The Garrison Standard.