Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Cibolo
Gate installation in Cibolo, TX runs between $2,400 and $11,000 depending on the gate type, length, automation, and the footing work your property needs. Most Cibolo homeowners should expect a single swing gate to land near $3,200 to $5,500 installed, while a sliding gate with an operator typically falls between $5,500 and $9,000. We’re the Gate Installation crew from Carver Gate Repair, and we serve Cibolo from our San Antonio dispatch office with background-checked, uniformed technicians on every job. Call (469) 530-2485 and a live person answers, any hour, any day.
Why Carver Gate Repair Is Cibolo’s Preferred Gate Installation Company
Homeowners around Buffalo Creek, along FM 1103, and in the subdivisions off Wiederstein Road don’t need a general contractor who occasionally hangs a gate. They need a gate crew that knows how caliche soil behaves, what a properly set post footing looks like, and how to wire an operator so the safety reversal actually works when it matters. That’s what we do. Our technicians arrive in uniform, give you a written price before any work starts, and back every installation with a written guarantee through our 365-Day Done Right Promise.
The Garrison Standard is what we work to, and it’s non-negotiable. Written price before work begins. Background-checked technician on site. Gate tested through full open-close cycles, including safety reversal, before we call the job done. If a gate install fails inside the guarantee window, we come back free of charge. No argument, no invoice. Lonnie Burke leads the crew, and that consistency across the board is the only reason we can offer a guarantee in writing on every job.
Cibolo homeowners call us for Gate Repair – Cibolo because they’ve already burned through the other kind of experience: a tech who no-shows, a price that moves at the door, a gate that sags within a year. We’re not that. We pick up the phone, we show up on schedule, and the number on the written quote is the number you pay.
Sliding Gate Installation in Cibolo
Sliding Gate Installation in Cibolo usually costs between $5,500 and $9,000 for a complete build, including the gate panel, V-track or cantilever roller system, operator, and the concrete footing poured to handle the load. On properties along the FM 1103 corridor where the caliche shifts with South Texas moisture swings, we routinely pour footings deeper than the minimum spec. A sliding gate’s entire weight plus operator torque rides on that concrete, and Cibolo’s clay-heavy soil doesn’t forgive a shallow pour.
What The Job Includes
A proper sliding gate install starts with the footing and the track. We set the concrete pier below the active soil layer, anchor the rack and pinion track, mount the operator, then wire the safety photocell and run reversal tests under load. The gate doesn’t leave our hands until it opens and closes cleanly through fifty cycles.
When Cibolo Homeowners Choose Slides
Sliding gates are the right choice when a driveway slopes or when a swing gate would need to clear a car, a fence line, or a drainage swale. They also work well on wider driveways where a double swing would need four posts and a lot of real estate. In Cibolo’s newer subdivisions off Old Wiederstein Road, slide gates are the most common install we do, simply because the driveways are wide and the lots are in active soil.
Gate Opener Installation in Cibolo
Gate Opener Installation in Cibolo runs between $1,800 and $4,200 depending on whether you need a swing arm operator, a slide operator, or a full underground loop detector system added to the ground. If your gate already has power at the post, the work usually takes a single day. If we need to pull a dedicated electrical run or add solar, that’s a longer job with a written price agreed before we start.
Safety Sensors And Reversal Testing
Every automatic gate in Texas has to meet UL 325 entrapment protection standards. That means a properly wired safety edge or photocell, correct force settings, and a reversal test with a physical obstruction, not just a settings check. Cibolo homeowners should ask any installer whether they test reversal under load. If the answer is vague, that’s a red flag.
Keypad And Intercom Ready
We install openers with keypad entry, intercom, and loop detector readiness from day one. If your HOA in the Cibolo area requires a specific access setup, we’ll match the hardware to it. Power at the gate is the first question we ask, because retrofitting a solar opener onto a property with no planned electrical run is a lot easier before the operator is ordered.
Trusted Brands We Service in Cibolo
We install and service gate operators from DoorKing, Ghost Controls, and Viking, among others. What that means for a Cibolo homeowner is that we stock the right parts locally and we don’t waste a week ordering a control board from across the country. If your existing gate runs on a Viking operator and you want to add a keypad, we can do it. If a Ghost Controls arm gave out, we carry replacements. One call to (469) 530-2485 gets a live person who can schedule it.
Common Gate Installation Problems We See in Cibolo Homes
- Post footings set too shallow in caliche soil. Cibolo’s clay-heavy ground expands and contracts with moisture, and a shallow footing lets the gate drift out of plumb within a season. We dig past the active soil layer and set a deeper concrete pier, which means planting the post in load-bearing ground, not just below the frost line.
- Operators installed without entrapment protection wired correctly. A gate that stops on force alone isn’t UL 325 compliant and it’s a danger to kids and pets. Every automatic gate we install in Cibolo gets a safety photocell or safety edge, plus a live reversal test before we leave.
- Solar openers added after the fact without planning the power run. Homeowners often decide on an automatic gate after the panel is already fabricated, and then we’re stuck retrofitting a solar panel and battery box onto a post that wasn’t designed for the weight. Planning the power first saves a mid-project design change.
- Swing gates that bind because the hinge post moved. We see it regularly in the black clay off Buffalo Creek: a gate that worked fine for six months, then starts dragging. The panel usually isn’t the problem. The footing is. Fix the foundation and the gate stops binding.
Pricing for Gate Installation in Cibolo, TX
Here’s what Cibolo homeowners can expect on a written quote from Carver Gate Repair:
- Pedestrian gate installation: $400 to $1,200
- Single swing gate with operator: $3,200 to $5,500
- Double swing gate with operator: $5,500 to $9,500
- Sliding gate with operator: $5,500 to $9,000
- Gate opener installation (existing gate): $1,800 to $4,200
- Security gate or custom steel gate: $6,500 to $11,000
What moves the number is the gate’s width, the material, whether we’re pulling a new electrical run, and how deep the footings need to go in your specific soil. We quote the full job before any work starts, and that written price doesn’t change at the door. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Cibolo
Our Gate Installation crews work throughout the Cibolo area, including Schertz, Universal City, Converse, and New Braunfels. Same written-price policy, same background-checked technicians, same one-year guarantee. If you’re just outside Cibolo, call (469) 530-2485 and we’ll let you know if we cover your street.
Serving Cibolo, TX – Our Local Coverage Area
We’re based in the Cibolo area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Cibolo
Most Cibolo gate installations take two to four working days from the day we start digging to the final reversal test. A single swing gate with an existing operator can often be done in one day, while a sliding gate with new footings and a dedicated power run is typically a three-day job. We’ll give you a written schedule before we start, and the date we commit to is the date we show up.
The usual reason is a post footing that was set too shallow in Cibolo’s caliche-heavy soil. The clay expands and contracts with moisture, and a shallow pier lets the hinge post move, which makes the gate bind or sag. The fix is a deeper concrete footing below the active soil layer, not another adjustment to the hinges. Call (469) 530-2485 and we’ll tell you honestly whether your footing is the problem.
Yes. Every automatic gate in Texas must meet UL 325 entrapment protection standards, which means a safety photocell, a properly wired safety edge, or both, plus a reversal test under load. A gate that stops on motor force alone is a danger and a compliance gap. We wire and test the safety system on every install in Cibolo.
Yes, and this comes up often in Cibolo’s newer subdivisions where the power run wasn’t planned when the house was built. We can pull a dedicated electrical line to the gate, or we can size a solar opener system with battery backup. The best time to plan this is before the gate panel is ordered, so call (469) 530-2485 for a written quote once you know the gate’s location.
We install and service DoorKing, Ghost Controls, and Viking operators, plus several other major brands. We keep parts for these systems locally, so a failed control board in Cibolo doesn’t mean waiting two weeks for a shipment. If you’re not sure what operator you have, we can identify it over the phone and have the right parts on the truck before we arrive.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Cibolo through the Garrison Partners family since 2008.
Contact Carver Gate Repair in Cibolo
If you need a gate installed, a gate opener added, or a sagging gate diagnosed, call (469) 530-2485. A live person answers at any hour. We’ll schedule a time that works, send a background-checked technician in uniform, and put a written price in your hand before any work starts. Every installation carries our written one-year guarantee, and if anything fails inside that window, we come back free of charge. That’s the Garrison Standard.