Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Davie
Gate installation in Davie usually falls into one of two jobs: a new gate and operator from the ground up, or a replacement for a gate that’s drifted, sagged, or stopped closing square. Most quotes we give for a complete automatic gate installation in Davie land between $4,800 and $11,500, depending on driveway width, operator type, and how far power has to run. We quote that price in writing before any work starts, so the number never moves at the door. Call (469) 530-2485 for a free measure and written estimate.
Davie’s western neighborhoods still carry a lot of equestrian and large-lot properties. Long driveway runs, sandy soil, and gates wider than anything you’d see in a typical South Florida subdivision change how an installation has to be done. Our crew knows those conditions because we work them regularly. A gate that’s set too shallow in Davie’s sandy ground will drift within a year. A driveway 200 feet long needs a loop detector and safety photocell spec’d differently than a 40-foot run in a gated community off Flamingo Road. We account for all of it before the first post hole is dug.
Key Takeaways
- Typical cost: $4,800 – $11,500 for a complete automatic gate installation in Davie, quoted in writing upfront.
- Local conditions matter: Sandy, high-water-table soil and long driveway runs drive post depth and operator sizing.
- Full installs include more than a motor: groundworks, power run, safety photocells, loop detector, and UL 325 reversal testing.
- Written guarantee: every repair and installation is backed by the 365-Day Done Right Promise, in writing, for a full year.
- One phone number, answered by a person: (469) 530-2485, 24 hours a day.
Why Carver Gate Repair Is Davie’s Preferred Gate Installation Company
Carver Gate Repair is part of the Garrison Partners family, operating to The Garrison Standard since 2008. That standard isn’t a slogan. It’s a written set of rules every tech follows: written price before work starts, background-checked and uniformed technician on site, clean job site when the crew leaves, and a written guarantee on every repair and installation. That guarantee runs a full year from the date of service. If anything fails inside that window, we return and fix it at no charge. No argument, no re-quote.
Davie homeowners call us for gate installation, gate repair, and gate motor repair. We dispatch from our Miami (South FL) office and serve Davie locally, so the crew that shows up knows the difference between a swing gate on a quarter-acre lot and a slide gate opening onto Griffin Road. The Gate Installation team handles the full job:
- Driveway gate installation and replacement
- Pedestrian gate installation alongside a vehicle gate
- Sliding gate installation, including track and footing work
- Swing gate installation for double driveways and long entry runs
- Security gate installation with operator and access control wiring
Lonnie Burke leads our installation crews, and our techs train on nine motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, and Elite. We stock common parts for those brands so a Davie job doesn’t stall waiting on a part that has to ship from out of state.
Gate Fabrication in Davie
Gate Fabrication in Davie starts with one question: what does this gate actually have to do? A gate across a 20-foot driveway on a standard Davie lot is a different structure than a 30-foot slide gate on a horse property near Southwest Ranches. We fabricate to the opening, the soil, and how the gate will be used daily, not to a catalog photo.
A fabricated gate in Davie typically runs $2,200 to $6,500, depending on size, material, and whether you need a matching pedestrian gate built into the same frame. That price includes the gate structure itself: steel or aluminum frame, infill panels or pickets, hinge points, and powder coating. It does not include the operator, groundworks, or power run, which get priced separately and combined into one written estimate.
Steel and Aluminum Frames
Steel holds up to Davie’s humidity if it’s primed and powder-coated properly. Aluminum won’t corrode but flexes more on wide gates. We talk through both options at the measure and recommend based on width, weight, and how much wind the gate will catch. A wide solid-panel gate in a storm zone needs more frame than a picket gate on a sheltered lot.
Post Footings in Sandy Soil
Davie’s sandy soil and high water table are the main reason a gate fails early. A hinge post set 24 inches deep in a Fort Lauderdale yard might be standard, but on a wide swing gate in Davie, we set posts 36 to 42 inches deep with a concrete footing that carries past the frost-free mark and into stable ground. Undersized footings are the most common reason a gate drifts after a year or two.
Automatic Gate Installation in Davie
Automatic Gate Installation in Davie is more than bolting a motor to a gate post. The full job includes the operator, the gate’s physical alignment, the power and control wire run, safety photocells, a loop detector on the vehicle side, and Gate Installation testing to UL 325 standards before we call the job complete. A full automatic gate installation in Davie runs $4,800 to $11,500.
We don’t promise same-day turnaround on installations. A proper automatic gate job takes planning, a measure, sometimes a day of concrete work, and then the operator and wiring. What we do promise is a written price and a schedule we hold to. The phone rings to a live person; you won’t be calling a voicemail box at 8 p.m. on a Friday.
Operators and Loop Detectors
We install operators from LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, and DoorKing. The operator gets sized to the gate’s weight, width, and cycle count. On long Davie driveway runs, we add a loop detector so the gate stays open when your truck is still on the loop, and safety photocells so the gate reverses if anything breaks the beam.
Power Runs and Conduit
Power and control wire in Davie needs to be in conduit and buried below a depth that lawn equipment and standing water can’t reach. We saw the result of a shallow wire run after a heavy rain on a job off Stirling Road: the gate worked fine in dry weather and faulted every time the ground saturated. We run the wire once, in conduit, at depth, and test it before we cover the trench.
Trusted Brands We Service in Davie
Our techs are trained on Linear, Viking, Ghost Controls, DoorKing, and the other major gate operator brands. That matters because a gate motor isn’t a lightbulb. A DoorKing swing operator wired like a Viking slide operator will fault out or burn a board. We stock common replacement parts and control boards for these brands so a Davie repair doesn’t sit waiting for a part. If your operator is already installed and failing, we diagnose it by brand, model, and symptom, not by guesswork.
Common Gate Installation Problems We See in Davie Homes
- Posts set too shallow in Davie’s sandy soil. A swing gate or slide gate drifts, the operator fights the geometry, and the gate starts banging or sticking. The fix is usually new footings and a re-set post, not another motor adjustment.
- Long driveways with no loop detector or safety photocell. A fast automatic gate closes on a car or a child because nothing is detecting the vehicle. UL 325 entrapment protection isn’t optional; it’s part of the job.
- Homeowners calling for gate repair when the real fix is gate installation. A hinge post footing that’s corroded or undersized can’t be saved by adjusting the operator. We’ll tell you straight if the structure has to be replaced.
- Wire runs without proper conduit or trench depth. The gate looks fine until the first heavy Davie rain, and then the control board faults. Shallow wire is one of the most common failure points we find on recent installations done by generalists.
Pricing for Gate Installation in Davie, FL
A partial picture of costs, based on what we quote in Davie:
| Job | Typical Davie Range |
|---|---|
| Pedestrian gate, basic | $900 – $2,200 |
| Driveway swing gate, single | $2,200 – $4,800 |
| Double swing gate, 20 – 30 ft | $3,400 – $6,800 |
| Slide gate, including track and footing | $3,800 – $7,500 |
| Full automatic gate installation (gate, operator, wiring, safety edges, loop detector) | $4,800 – $11,500 |
What moves a Davie quote: driveway width, single or double gate, slide versus swing, operator brand, and how far power has to run from the panel. Long runs on western Davie horse properties add cost because material and trenching add up. We give one written price before work starts, and the price on that paper is the price you pay when the gate is done and tested. Call (469) 530-2485 for a free measure and written estimate.
We Also Serve Cities Near Davie
Beyond Davie, our crews cover gate installation and gate motor work in Gate Installation in Davie and the surrounding area. That includes Jacksonville, Miami, Tampa, and Orlando. If you’re on the edge of Davie or just across a city line, call and ask; we’d rather tell you straight whether we can get to you than burn your time.
Serving Davie, FL – Our Local Coverage Area
We’re based in the Davie area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Davie
We set hinge post footings 36 to 42 inches deep for standard swing gates in Davie, and sometimes deeper for wide or heavy double gates. The sandy soil and high water table mean a shallow footing will shift, and the gate will start to sag and drag within a couple of years. We drill, set, and pour so the post sits in stable ground, not in the top layer of loose sand.
Yes. On a residential automatic gate in Davie, proper installation means safety photocells and, on most driveway applications, a vehicle loop detector. UL 325 testing covers entrapment protection, and a gate that reverses when it meets an obstruction is a basic requirement. If a previous installer skipped those, we’ll bring the gate up to standard as part of the job. Call (469) 530-2485 and we’ll explain exactly what your gate needs.
Sometimes. If the panel itself is sound and the sag comes from worn hinge hardware or a gate that’s out of square, we can often cut and reinforce the frame and re-hang it. If the hinge post footing has settled or corroded in Davie’s sandy soil, tightening hinges won’t hold. In that case the real fix is pulling the post, re-setting the footing, and re-hanging the gate square. We’ll tell you which one your gate needs before quoting.
Most full automatic gate installations in Davie take two to five working days, depending on how much concrete has to cure and how far the power run goes. A simple single swing gate on an existing concrete apron can go faster. A slide gate with new track, deeper footings, and a 150-foot power run takes longer. We give you a schedule with the written quote and hold to it.
Yes. Our techs train across all nine brands listed, including Linear, Viking, Ghost Controls, and DoorKing. When a Davie customer calls about a failing operator, we diagnose by brand and model, and we stock common parts locally. The same crew handles repair and installation, so the person who fixes your operator is the person who knows how the whole gate system should work.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Davie, FL and the surrounding area with gate installation, gate repair, and gate motor work to The Garrison Standard.