Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Edgewood
A new gate installation in Edgewood typically runs $2,800 – $7,500 depending on size, material, and motor type, with most projects measured and scheduled within 48 hours. Our Gate Installation team works from the Seattle office and dispatches directly to Edgewood properties, so you’re not waiting on a contractor driving up from Tacoma or across the bridge. Call (469) 530-2485 for a free measure and written price.
Edgewood sits on the bluff above Commencement Bay with a mix of mid-century rambblers, newer builds on Meridian, and rural properties backing toward the Puyallup River valley. That variety means gate needs here aren’t one-size-fits-all. A homeowner on 112th Street East with a long gravel drive needs a different setup than someone on the Edgewood-Nyholm cutoff with a tight urban lot. We’ve installed gates on both. We know where the soil shifts with winter rain, where driveways grade steep enough to affect operator strain, and which Edgewood neighborhoods see more package theft driving demand for secure pedestrian gates.
Why Carver Gate Repair Is Edgewood’s Preferred Gate Installation Company
We’ve built our reputation in Edgewood the same way we do everywhere: showing up when promised, giving a written price before touching a tool, and standing behind the work for a full year. The Garrison Standard doesn’t bend for any market.
Our technicians are background-checked and uniformed. You get a name and photo before we arrive, not a stranger in an unmarked truck. Dispatch runs from our Seattle office, but the crew that installs your gate lives and works in the South Sound. That matters when you need a post-install adjustment and don’t want to wait three days.
Phones get answered by a live person, 24/7. No voicemail maze, no “leave a message and we’ll call back Monday.” We’ve taken calls at 10 p.m. from Edgewood homeowners whose gate failed during a storm and needed to know when help could arrive.
Every installation comes with our 365-Day Done Right Promise. If something isn’t right, we make it right. No charge for the return trip if the issue falls inside that window.
Driveway Gate Installation in Edgewood
Driveway Gate Installation in Edgewood ranges from $3,200 for a basic single swing in aluminum to $7,500 for a heavy-duty steel slider with automation on a long or steep approach. Most Edgewood homeowners call us when they’re replacing a deteriorating manual gate, adding security after a break-in on their street, or finishing new construction where the builder left the opening but no gate.
We measure the exact grade, check clearances for delivery trucks and emergency vehicles, and confirm power availability before quoting. Many Edgewood homes on the hill above the valley have drives that slope toward the street, which affects drainage at the gate line and operator mounting. We account for that in the plan, not as a surprise add-on.
Swing vs. Slider for Your Driveway
Swing gates work well on flat drives with room inside the property line for the arc. In Edgewood, we see them most on Meridian-area lots and older homes on 96th Street. Sliding gates need less interior space but require level track and a clear run alongside the fence. They’re the better choice for tight lots near the Nyholm corridor or anywhere the drive climbs steeply from the road.
Power and Access Planning
Most automated driveway gates need 110V within 50 feet of the operator. If your Edgewood property doesn’t have that, we coordinate the electrical run or specify a solar-ready system. We also plan for keypad, remote, or app entry during the initial measure so you’re not retrofitting six months later.
Sliding Gate Installation in Edgewood
Sliding Gate Installation in Edgewood typically costs $3,800 – $7,200, with the upper end covering cantilever designs for uneven ground or commercial-duty openers for heavy wood or ornamental steel. We recommend sliders for Edgewood properties where the drive slopes down to the street, where interior space is limited, or where snow accumulation could block a swing gate’s arc.
The track system is the critical detail. We pour a concrete footing below frost line and use galvanized V-groove wheels rated for the gate weight plus wind load. Edgewood’s wet winters and occasional freeze-thaw cycles punish cheap hardware, so we don’t install it.
Cantilever Track Systems
Cantilever gates hang from a counterbalanced frame and don’t touch the ground. They’re ideal for Edgewood properties with gravel drives, drainage issues, or grades that shift seasonally. The upfront cost runs 15 – 20% higher than a standard tracked slider, but you eliminate the maintenance of keeping a ground track clear.
Operator Sizing for Long Runs
A sliding gate on a 60-foot Edgewood ranch entrance needs a different motor than a 12-foot urban driveway gate. We match the operator to the gate weight, cycle frequency, and wind exposure. For heavy gates or high-use situations, we spec commercial-grade units from Viking or Linear rather than pushing a residential motor past its limit.
Trusted Brands We Service in Edgewood
We install and maintain equipment from nine gate-motor brands, including FAAC, BFT, Linear, and Viking. For Edgewood customers, that means we don’t force-fit whatever’s in the warehouse. If you want a quiet Italian-made FAAC hydraulic operator for a residential swing gate, we can source it. If you need a workhorse Linear slide gate operator for a rental property on Pacific Highway, we stock those parts and know the adjustment points. Our Seattle warehouse carries common control boards, limit switches, and loop detectors for fast turnaround when something needs replacement. You’re not waiting two weeks for a part from California while your gate hangs open.
Common Gate Installation Problems We See in Edgewood Homes
- Post heave from clay soil and winter saturation. Edgewood’s glacial till holds water like a sponge. Gate posts set without proper drainage or depth work loose after two or three wet seasons. We set posts in concrete to 42 inches minimum and add gravel drainage at the base.
- Operator strain from steep driveway grades. Gates on hillside Edgewood properties fight gravity every cycle. We spec higher-torque operators and heavier hardware than flatland installs require, and we adjust clutch settings for the actual load, not the catalog default.
- Corrosion on hardware near the salt air influence. Properties closer to Commencement Bay see faster rust on hinges, chains, and track. We use stainless or hot-dip galvanized hardware in those locations and recommend aluminum or vinyl-clad gates over raw steel.
- Inadequate clearances for emergency access. Edgewood Fire Department needs 20 feet of horizontal clearance and 14 feet vertical for apparatus. We verify those dimensions during measure and won’t install a gate that blocks a required access path.
Pricing for Gate Installation in Edgewood, WA
Here’s what gate installation costs in Edgewood’s current market:
- Basic pedestrian gate (manual, aluminum or steel): $2,800 – $3,800
- Single swing driveway gate with operator: $3,200 – $5,200
- Double swing driveway gate with operator: $4,500 – $6,800
- Sliding driveway gate with track and operator: $3,800 – $7,200
- Security gate with access control (keypad, intercom, remote): add $800 – $2,400
- Electrical run from house to gate (if needed): $600 – $1,800
These are installed prices with labor, concrete footings, and basic hardware. Custom ornamental work, cedar cladding, or stone pillars push the top of range. We give you a written, itemized price before any work starts. The number doesn’t move once you approve it. Call (469) 530-2485 for a free measure and exact quote for your Edgewood property.
We Also Serve Cities Near Edgewood
Our crews install gates throughout the South Sound and beyond. We regularly work in Edgewood itself plus Seattle, Spokane, Tacoma, and Vancouver. Dispatch is coordinated from our Seattle office, but the technician who measures your job is the same one who returns to install it.
Serving Edgewood, WA – Our Local Coverage Area
We’re based in the Edgewood area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Edgewood
We typically schedule a free measure within 24 – 48 hours of your call, and most Edgewood installations are completed 1 – 2 weeks after approval, depending on material availability. Call (469) 530-2485 to book a measure – estimates are free.
Yes, we work across Edgewood including properties near Meridian, along 112th Street East, and in the Nyholm area. Rural lots with long drives and urban infill lots with tight setbacks each get a plan matched to the site.
Every installation is covered by our 365-Day Done Right Promise. If anything fails or doesn’t operate as promised within that year, we return and fix it at no charge. The guarantee is in writing on every job.
Edgewood pricing runs roughly parallel to Tacoma and slightly below Seattle for equivalent work. Travel time is shorter from our dispatch point, and permitting, when required, moves faster through Pierce County than King County.
Yes, we also handle Gate Repair in Edgewood and Gate Motor Repair in Edgewood on all major brands. If your current gate can be salvaged, we’ll tell you honestly. If replacement makes more sense, we’ll show you why.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Edgewood since 2008.