Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Flower Mound
Gate installation in Flower Mound starts with the ground under your feet. The black clay here swells in spring and shrinks through summer, and a gate post set in a shallow footing will move with it. We base every Gate Installation quote on a proper concrete pier below the active soil zone, not just a bag of quick-set and a hope. Most Flower Mound installations take one to two days once materials are on site, and every job begins with a written price before anything is dug. Call (469) 530-2485 and a live person will schedule the site visit.
Why Carver Gate Repair Is Flower Mound’s Preferred Gate Installation Company
Homeowners in Flower Mound don’t need another contractor who treats gate work as a side job. They need a crew that knows what the soil does to a post here. We schedule an arrival window, show up in uniform, and walk the site before quoting, so the price reflects what the ground and the existing power actually require. Lonnie Burke runs the crews to The Garrison Standard: written prices, background-checked technicians, and a full-year guarantee on every repair in writing.
Our Flower Mound customers call us after a previous installer put a post on a 24-inch footing and the gate was dragging within eighteen months. We measure the clay, we specify the pier depth, and we answer the phone when you call at 9 p.m. because the gate won’t open. That’s the whole job.
Gate Installation Services in Flower Mound
Gate Installation Services in Flower Mound cover the full job: removing old hardware, digging proper footings, setting posts plumb, hanging the panel, and mounting the operator if the gate is automated. Flower Mound homeowners typically need this when a wooded lot or side-entry driveway has no existing gate, or when a previous install failed and the post has heaved. A standard single swing gate installation here runs $2,800 to $5,500 depending on panel width, finish, and whether power already exists at the opening.
Driveway and Double Gates
A double swing (two leaf) gate across a wide Flower Mound driveway runs $6,000 to $12,500 installed. The two posts have to move independently, so each gets its own pier, and the operator has to coordinate both leaves through one controller. We set the posts deep enough that a wet spring won’t throw the leaves out of plane.
Pedestrian and Security Gates
A pedestrian gate is the simplest install we do and still gets the same footing work. Most run $1,800 to $3,400 with hardware. Security gates, which usually sit closer to the street or across a side approach, get a stronger post and a closer hinge spacing, and run $4,000 to $9,000 depending on height and panel material.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Electric Gate Installation in Flower Mound
Electric Gate Installation in Flower Mound means running power to the operator, mounting the arm or piston, setting the travel limits, and testing entrapment protection to UL 325 before we leave. A homeowner needs this when they want the gate to open without getting out of the car, which on a Flower Mound street with a 100-degree afternoon is most of them. An electric swing gate operator install, including the controller and safety photocells, runs $2,200 to $4,700 on top of the gate hardware itself.
Swing Operators and Articulating Arms
Most Flower Mound driveways suit a swing operator with an articulating arm, because the arm gives on uneven travel and won’t fight a panel that settles a fraction. We set the close direction and force to the panel’s actual weight, not a default value, and we cycle-test it at least ten times.
Slide Operators and Track Work
For wider or heavier gates, a slide operator on a steel track runs $3,500 to $7,200 installed, including the rack and the end stops. The track bed has to be set on compacted base above a level pad, because once the clay shifts, the rack binds and the operator faults mid-travel.
Trusted Brands We Service in Flower Mound
Carver Gate Repair technicians work on nine gate-motor brands, so if your Flower Mound gate already has a LiftMaster, FAAC, Linear, Viking, Ghost Controls, DoorKing, Elite, or Mighty Mule system, we can match the panel and controller instead of telling you it all needs to be ripped out. We keep parts for the most common boards and arms in local stock, and can call in brand-specific arms or remotes for most Flower Mound installs within a day. The brand on the box matters less than the soil under the post, but it helps to work with someone who knows all of them.
Common Gate Installation Problems We See in Flower Mound Homes
- Heaved hinge posts after a wet spring: Flower Mound’s expansive clay swells when wet, and a post on a shallow footing works loose. The swing gate starts dragging, then the operator’s obstruction fault cycles on every open.
- Slide operators mounted to a floating slab: A slab that moves with the clay puts the rack out of alignment. The pinion binds, the motor strains, and the gate refuses to travel its full course.
- Safety edges and photocells mounted for looks: When sensors aren’t set on a real sight line, settling just twists them further. The gate either won’t reverse, or it refuses to run at all, which is the correct but frustrating result.
- Operators under-specified for the panel weight: A heavier board-on-board panel on a small swing arm over-torques every cycle. The arm burns out early, and the homeowner thinks the brand is the problem when it was the sizing.
Pricing for Gate Installation in Flower Mound, TX
Here are the numbers in Flower Mound’s market. A pedestrian gate with hardware: $1,800 to $3,400. A single swing driveway gate installed: $2,800 to $5,500. A double swing driveway gate: $6,000 to $12,500. An electric operator added to any of those: $2,200 to $4,700 for swing, $3,500 to $7,200 for slide, including the controller and safety devices. The wildcard in Flower Mound is the footing depth; we won’t quote a number then discover bad soil and change the price. We walk the site first, so the written price already reflects the clay.
We Also Serve Cities Near Flower Mound
Carver Gate Repair covers Flower Mound and the surrounding area, including Roanoke, Southlake, Argyle, and Grapevine. We schedule across the corridor daily, so a gate install in any of these towns gets the same written price and the same crew standard.
Serving Flower Mound, TX – Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Flower Mound
Most Flower Mound gate installations take one to two working days once materials and any required power run are confirmed. The post-pier concrete needs to cure before we torque the hinges and mount the operator, so we don’t rush that step. You’ll get the schedule in writing at the quote.
Yes, any automatic gate in Flower Mound needs entrapment protection to meet UL 325: a minimum of two independent means of detection, usually photocells plus an edge sensor or an inherent reversing system. We test the reversal speed and force at both the minimum and maximum travel positions before we hand you the remote. Call (469) 530-2485 and we’ll walk through what your specific opening needs.
If the driveway slopes up toward the house, a swing gate that has to open uphill fights gravity; a slide gate stays on its rail and works better. A flat or wide Flower Mound lot with room for the leaf arc suits a swing gate, which costs less to install. We’ll tell you which makes sense for your driveway after one site visit.
Yes, in Flower Mound’s sun a solar operator is possible, but the panel needs to produce enough power for the duty cycle you actually use, not the optimistic rating on the box. We size the panel and a battery bank to the motor draw and the number of cycles per day, and we still run a wired low-voltage path when possible.
Yes, our Flower Mound crews install LiftMaster and FAAC operators regularly, along with Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems. Keypad entry is a standard part of the job; we wire it at the column and pair the codes before we leave, and we test it with you standing there. For an exact quote, call (469) 530-2485.
Get a Written Price for Gate Installation in Flower Mound
If your gate post is leaning, your operator is fighting a sagging panel, or you’re starting from bare fence posts, Lonnie Burke and the Carver Gate Repair crew will come out, walk the site, and hand you a written price before any dirt moves. The guarantee is in writing and good for a full year on every repair. Call (469) 530-2485 for a free estimate, and a real person will answer.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Flower Mound to The Garrison Standard.