Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Frisco
Gate installation in Frisco means dealing with one thing most installers never talk about: expansive clay soil. It swells when wet and shrinks when dry, which slowly moves gate posts out of alignment. That is why a post footing dug too shallow or poured too narrow will fail here long before the gate panel itself shows wear. We plan every Frisco installation around that soil behavior from day one. If you need a new driveway gate, pedestrian gate, or a full motorized system, call us at (469) 530-2485 and we will walk you through what the job actually requires.
Why Carver Gate Repair Is Frisco’s Preferred Gate Installation Company
Frisco homeowners tend to ask the same three questions before hiring anyone: who is showing up, what is the real price, and what happens if it fails. We answer all three before you sign anything. Every Carver technician is background-checked and uniformed, so the person at your gate is the person we said we were sending. Every job gets a written price before any work starts. And every repair carries our 365-Day Done Right Promise in writing: if it is not right, we make it right, with a free second visit inside the guarantee window.
Lonnie Burke runs our operation to the Garrison Standard, the same process framework that has governed Garrison Partners work since 2008. That means consistent arrival windows, clean job sites, and no moving numbers at the door. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, and our crews serve Frisco locally, so we are never more than a short drive from neighborhoods like Phillips Creek Ranch, Stonebriar, or The Trails.
We stock parts for Linear, Viking, Ghost Controls, and DoorKing systems locally, which keeps turnaround tighter for Frisco customers who do not want to wait on a distributor in another state. When a gate operator fails, the fix usually comes down to having the right limit switch, control board, or gear kit on the truck, not guessing at it.
Gate Opener Installation in Frisco
Gate Opener Installation in Frisco typically runs $950 to $2,600 depending on the operator, the gate’s weight and cycle count, and whether new wiring or a solar kit is required. This is the job clients call us for most often after a builder-grade operator burns out on a busy family driveway. The work involves mounting the operator, setting travel limits, wiring any safety devices, and programming remotes and keypads. We quote the full number in writing before the first tool comes off the truck.
Retrofit Openers on Existing Gates
Most Frisco gates we install openers on are already in place. That is fine. We match the operator to the gate’s actual weight and daily cycle count, not the leaflet spec. A double swing gate on a two-car driveway cycling eight times a day needs a different class of operator than a pedestrian gate used twice daily.
Safety Device Integration
Every motorized gate gets photo-eyes and edge sensors aligned and tested for automatic reversal before we call the job done. We run reversal testing with a calibrated force gauge, not a visual check. This is the part of an installation that protects children and pets, and we treat it as non-negotiable.
Gate Fabrication in Frisco
Gate Fabrication in Frisco is for homeowners whose existing gate is too far gone to repair, or who want a gate sized and styled for a specific driveway. Custom fabrication here typically runs $3,800 to $9,500 for a single driveway gate, and $6,500 to $14,000 for a double gate, depending on material, height, and automation. We build to the opening, not to a catalog, which matters in Frisco because lot sizes and setback styles vary widely across the city.
Driveway and Double Gates
A double driveway gate in Frisco needs a solid center stop, reinforced hinge posts, and a properly paired opener system if it is automated. We also account for the slope of your driveway at the gate line. A gate that looks fine on paper can drag if the drive has a crown or a grade change near the entry.
Pedestrian and Security Gates
Pedestrian gates in Frisco backyards and side yards are often the first thing a homeowner automates. We fabricate narrow swing gates with smaller operators sized for daily use, and we build them to swing clear of fences and landscaping without adjustment a year out.
Trusted Brands We Service in Frisco
Our technicians are trained across nine gate-motor brands, and in Frisco we see a lot of LiftMaster, Viking, Ghost Controls, and DoorKing on residential properties. That matters because parts are not interchangeable between brands. A Viking control board will not drive a Ghost Controls arm. We carry common boards, limit switches, remotes, and gear kits for the brands most common in Frisco, so a repair often finishes the same day we diagnose it. When a part is not on the truck, we order it same day and come back as soon as it lands.
Common Gate Installation Problems We See in Frisco Homes
- Sagging or dragging gates from undersized post footings. Frisco’s expansive clay pushes shallow footings out of true within a couple of seasons. We may dig the old post out and pour a deeper, wider footing before hanging the gate back on it.
- Operators specced for weight but not cycle count. A family driveway gate in Frisco can cycle dozens of times daily. That load strips rack-and-pinion gears and burns out motors that were rated for the gate’s weight but not its use pattern. We size operators to real usage.
- Safety entrapment protection never verified. We regularly find photo-eyes misaligned and edge sensors disconnected on recently installed gates. Homeowners have often never tested automatic reversal. We test it on every job and show you how to test it too.
- Gates hung on posts that were never deep enough for clay movement. The symptom is a gate that closes fine in March and drags by August. The fix is a proper footing, not a hinge adjustment.
Pricing for Gate Installation in Frisco, TX
A standard single swing gate installation in Frisco, including posts, hinges, and a new operator, runs $2,400 to $5,500. Pedestrian gates without automation run $1,200 to $3,000. Full custom fabrication with automation and access controls starts around $6,500 and can exceed $14,000 for a double driveway security gate with intercom and keypad entry. What moves the number is footing depth, gate weight, linear feet of conduit for power, and the operator brand. Every quote we give is a written price you approve before we start. Call (469) 530-2485 and we will price your specific setup honestly.
We Also Serve Cities Near Frisco
Our Frisco crews also cover Gate Installation work in Prosper, Aubrey, Little Elm, and Celina. If you are in one of those communities and need a new gate or a motor replacement, the same written-price, background-checked process applies. You can read more about our broader service area on our Frisco page.
Serving Frisco, TX – Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Frisco
Because the post footing was likely not deep or wide enough for Frisco’s expansive clay soil. The clay swells and shrinks through North Texas moisture swings, which slowly moves the post, and the gate sags or drags regardless of the hinge work. The real fix is a deeper, wider post footing. Call (469) 530-2485 and we will tell you if your footing is the root cause.
Most single driveway gate installations in Frisco take one to two days on site, not including concrete cure time on new footings. If we are fabricating a custom gate, add two to three weeks for build and finishing before the install day. We give you a written schedule at the quote stage, and we do not promise same-day installation because proper concrete placement and operator programming cannot be rushed safely.
Yes. Automatic gate operators in Frisco must meet UL 325 entrapment protection standards, which require photo-eyes or edge sensors and verified automatic reversal. Frisco code enforcement can require this on new and retrofitted installations. We install and test entrapment protection on every motorized gate we put in, and we show you the reversal test so you can verify it each month. Call (469) 530-2485 if your current gate lacks working sensors.
You can install a gate opener on an existing gate in most cases. We check the gate’s weight, swing arc, hinge condition, and post stability first. If the gate is structurally sound, we retrofit the opener onto it. If the posts have shifted or the panel is rusted through, we will tell you straight before any work starts. Call (469) 530-2485 for a free assessment of your gate’s condition.
Solar is a good option in Frisco when running conduit to the gate is impractical or cost-prohibitive. North Texas gets enough sun to run a solar gate opener reliably, but you need correctly sized panels and battery storage for the gate’s cycle count, not just a panel bolted on. We install solar kits for Viking, Ghost Controls, and Linear systems. Call (469) 530-2485 and we will price a solar solution for your gate’s actual usage.
Contact Carver Gate Repair in Frisco
If you are ready to replace a sagging gate or automate your driveway, call us at (469) 530-2485 for a free estimate. We answer the phone with a live person, give you a written price before any work begins, and stand behind every repair for a full year. Lonnie Burke and our Frisco crews work to the Garrison Standard on every job, from post footing to final reversal test.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Frisco and the surrounding North Texas communities.