Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Fulshear
Gate installation in Fulshear runs $2,400 to $7,800 for most residential jobs, depending on gate type, operator, and how much ground work the clay soil requires. We serve every part of Fulshear, from Cross Creek Ranch to Fulbrook and Weston Lakes, and we schedule most installations within seven to ten business days of the measure. Call (469) 530-2485 to book a free measure and get a written price before any work is scheduled.
Fulshear’s newer subdivisions keep pushing west into Blackland Prairie clay, and that soil moves. A gate post set to the same depth that works fine in sandy Katy ground will creep out of plumb here within a couple of seasons. That’s the difference between a gate that swings square for a decade and one that starts dragging its latch in year two. We grew up on this kind of ground. Our crews know what a proper footing looks like out here, and we don’t cut that corner.
Why Carver Gate Repair Is Fulshear’s Preferred Gate Installation Company
We operate to the Garrison Standard: a written price before any work starts, background-checked and uniformed technicians on every call, and a 365-day written guarantee on every installation. That guarantee is not a verbal promise. It’s on paper, covers a full year from the date of service, and if something fails inside that window we return on a free second visit. No charge, no argument.
A live person answers our phone 24 hours a day, seven days a week. Not an answering service, not a callback queue. When a Fulshear homeowner calls about a gate that won’t close at 10 p.m., someone picks up and starts working the problem. Lonnie Burke leads our crews, and the standard he holds is simple: show up when we say we will, leave the site cleaner than we found it, and stand behind the work in writing.
Scheduling and dispatch for Fulshear jobs run out of our Houston office, but the crews arrive in marked vehicles with local familiarity of Fulshear’s neighborhoods, streets, and building patterns. That matters when you’re routing conduit through a flower bed at a Fulbrook property or setting a slide gate track beside a Cross Creek Ranch driveway. We know what the ground is doing here.
Gate Fabrication in Fulshear
Gate fabrication in Fulshear means building a gate to the specific width, height, and weight your driveway or entry actually needs, not ordering a one-size-fits-none panel out of a catalog and hoping it hangs straight. Fulshear lots vary widely, from the tighter cul-de-sac lots in older sections to the acre-plus estates pushing west, so the fabrication step is where sloppy work gets baked in before installation even begins.
A custom-fabricated driveway gate in Fulshear typically runs $1,700 to $4,600 for the gate itself, before operator and installation. Pedestrian gates sit lower, usually $600 to $1,400 depending on material and hardware. Steel is the most common material we fabricate here because it holds up to the humidity and sun better than wood frames that warp.
Driveway Gates Built to the Opening
We fabricate each driveway gate to the actual measured opening, accounting for slope, swing clearance, and post condition. A double swing gate covering a 16-foot drive needs different hinge geometry than a single 12-foot panel, and we build to those numbers rather than forcing a stock panel to fit.
Pedestrian Gates With Proper Hardware
Pedestrian gates in Fulshear need at minimum a heavy-duty post, adjustable hinges, and a latch rated for repeated daily use with a self-closing mechanism if it feeds a pool or controlled access point. Cheap hinges sag fast. We spec hardware that lasts.
Automatic Gate Installation in Fulshear
Automatic gate installation in Fulshear pairs a fabricated or existing gate with an operator, power source, access control, and a working entrapment protection system that passes a UL 325 check. The operator is only one part of the job. Without proper footings, a dedicated power run or solar option, and a tested safety photocell or edge sensor, the automation is a refund request waiting to happen.
Installing the operator and automation side in Fulshear starts around $1,600 and can reach $3,800 or more when you add a loop detector, keypad entry, and long power run conduit. The cost tracks two things more than anything else: how far the gate sits from the house electrical panel, and whether the ground needs deeper footings for the operator post.
Swing Operators
A swing operator on a Fulshear gate must be mounted on a post set deep enough to stay put when the clay moves. We check post depth as part of every swing automation install. An articulating arm operator gives the smoothest operation on heavy double gates, and we set the close limits so the gate sets down without slamming in wind.
Slide Gate Systems
Slide gates work well on Fulshear properties with longer driveways and flat ground, but they need a straight, level track and correct rack-and-pinion alignment from day one. We pour the track slab to match the gate’s weight and travel, then test the full open and close cycle before we call the job done.
Trusted Brands We Service in Fulshear
We install and service Viking, Ghost Controls, and DoorKing operators in Fulshear, and our techs carry the common boards, limit switches, and safety sensors for those systems on the truck. That means a service call on a Viking swing operator in Weston Lakes doesn’t turn into a two-week part wait. We match the operator to the system already installed, so you’re not paying to replace a whole automation setup when one component failed.
Common Gate Installation Problems We See in Fulshear Homes
- Shallow post footings in expansive clay. Fulshear’s Blackland Prairie soil swells when wet and shrinks when dry. A hinge post set 24 inches deep that holds fine in Katy will walk sideways here, dragging the gate and stressing the operator until something cracks.
- Missing or misaligned entrapment protection. We regularly find automatic gates with no working safety photocell, or photo-eyes aimed directly into the afternoon sun so the beam never registers. That fails UL 325 safety requirements and leaves the gate a hazard to kids and pets.
- No dedicated power planning. The cheapest install is a gate panel hung on an existing post with no new conduit and no solar option quoted for gates far from the panel. Then the homeowner pays for a trenching job later that should have been part of the original install.
- Wrong operator for the gate weight. A heavy steel double gate on an undersized operator burns through the limit switch and gears fast. We match the operator to the actual gate weight, not the gate’s advertised weight.
Out in Cross Creek Ranch, a homeowner had us replace a sagging double swing gate on a LiftMaster operator. The panel looked fine, but the hinge post had walked almost an inch in the clay. We pulled it, set a deeper concrete footing, re-hung the gate, and re-leveled the operator arm before running the safety photocell and reversal test. The gate swings square now, and the loop detector triggers the close cycle exactly where it should. We also moved their keypad entry up out of the sprinkler spray line while we were there.
Pricing for Gate Installation in Fulshear, TX
Here’s what gate installation in Fulshear costs in today’s market. A fabricated steel driveway gate on new posts runs $2,400 to $7,800 installed. Adding a swing or slide operator pushes the total to $4,000 to $11,000 depending on brand, gate weight, and access control. Pedestrian gate installation with hardware typically lands between $900 and $2,200. A solar gate opener option for driveway gates far from a power source adds $300 to $900 over a hardwired operator, but it saves the trenching cost.
The written price we give you is the price you pay. We quote all materials, ground work, power, and safety testing before we schedule the install. Call (469) 530-2485 for a free Gate Installation estimate, and we’ll send a technician to measure and write the number down.
We Also Serve Cities Near Fulshear
Our Fulshear crews take jobs in the surrounding area as well. We handle gate installation in Richmond, Katy, Rosenberg, and Sugar Land on a regular basis, so if your property sits just outside the Fulshear line, call (469) 530-2485 and we’ll confirm coverage and schedule a free measure.
Serving Fulshear, TX – Our Local Coverage Area
We’re based in the Fulshear area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Fulshear
Most residential gate installations in Fulshear take two to four days from first measure to final safety test, depending on whether we’re reusing existing posts, the gate type, and whether we need to run power. Post removal and new concrete footings add a day because the concrete needs to set before we hang weight on it. Call (469) 530-2485 and we’ll give you a written schedule with your estimate.
Sometimes we can reuse existing posts, but in Fulshear’s expansive clay we inspect the post depth and plumb before we agree to it. A post that’s set less than 30 inches deep in this soil, or one that’s out of plumb by more than a quarter inch, should come out. Reusing a shallow or leaning post is a false economy.
Yes. A new automatic gate must pass a UL 325 safety check, which means a functioning entrapment protection device, usually a safety photocell or an edge sensor, plus correct force settings so the gate reverses on contact. We test every install and document the test before we call the job complete.
For Fulshear properties with the gate more than 100 feet from the main panel, a solar gate opener is usually the better option. Hardwired power at that distance means a dedicated conduit trench and a permit in some cases; solar avoids the trench entirely. We quote both options at the measure and give you real numbers for each.
We install and service Viking, Ghost Controls, DoorKing, and Elite operators, among others, and our techs carry parts for the common failures in those brands. We match the operator to the system already on the gate so you’re not paying for a full automation replacement when a single component failed. Call (469) 530-2485 and we’ll tell you what you have and what it needs.
Ready to get a gate installed in Fulshear? Call (469) 530-2485 for a free measure. We’ll send a uniformed, background-checked technician to your property, listen to what you need, and write a real price before any work starts. The number on the quote is the number you pay. That’s the Garrison Standard, and it’s in writing.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Fulshear and surrounding communities.