Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Georgetown
A new driveway or pedestrian gate in Georgetown, TX typically runs $2,800 to $9,500 installed, depending on the gate style, opener, and ground conditions. Most residential installations take two to four days from first post hole to final safety testing. If you’re off Williams Drive, in Sun City, or along Berry Creek, call (469) 530-2485 and we’ll give you a written price before any work starts.
Georgetown isn’t a city where you can dig a 24-inch post hole and walk away. The Blackland Prairie clay under much of the city expands and contracts with every wet-dry cycle. That soil movement is the single biggest reason gates here sag, bind, or fail at the hinge post within a few years. We plan for it on every Gate Installation quote we write in Georgetown. Our crews are dispatched from the brand’s Austin office and serve Georgetown locally, so you’re not waiting on a crew from across the metro.
Why Carver Gate Repair Is Georgetown’s Preferred Gate Installation Company
Lonnie Burke runs our Georgetown gate work to a single standard: written price before the job starts, background-checked and uniformed technicians on site, and a 365-Day Done Right Promise in writing on every installation. That’s The Garrison Standard, and it’s been the operating rule since 2008. Homeowners in Georgetown who have been burned by a no-show or a price that moved at the door tend to notice the difference quickly.
We work all over Georgetown – from the older lots along University Avenue to the newer developments west of I-35 and the gated sections around Sun City. That local familiarity matters because Georgetown’s housing stock varies: a 1970s ranch on a large lot off Leander Road has different gate needs than a newer build in Teravista or a patio home near the Square. Our techs know which areas have the worst expansive clay and plan footings accordingly.
The phones are answered by a live person 24/7, including weekends and holidays. No voicemail queue. When you call about a gate install in Georgetown, you talk to someone who can schedule a site visit and get you a written quote.
Gate Opener Installation in Georgetown
Gate Opener Installation in Georgetown means mounting a motor and control system to a gate that’s already built, then wiring it, setting travel limits, and testing safety reverse functions. It’s the job we do most after a swing or sliding gate is already in place, and it typically runs $1,400 to $3,800 depending on the opener type and the power run distance. Georgetown’s climate – hot summers, occasional freezes, and high humidity – means we recommend openers rated for continuous outdoor duty, not a light-duty unit meant for a farm gate.
Swing Gate Operators
A swing opener uses an articulating arm to push and pull the gate leaf. On a Georgetown double gate, that means two synchronized operators, one per leaf. We set the limits carefully because an over-travel on a swing arm will chew through the opener gearbox fast, especially on a heavy steel gate.
Sliding Gate Operators
Sliding openers work with a chain or rack and pinion drive. They’re the right choice for long driveways or lots where a swinging gate would hit a slope or a fence line. In Georgetown, we see a lot of sliding gates on acreage properties east of the city and in equestrian subdivisions where the driveway is graded away from the house.
Gate Fabrication in Georgetown
Gate Fabrication in Georgetown is the process of building a gate from raw steel or aluminum to fit a specific opening – not adjusting a pre-built panel. When a homeowner has an odd-width opening, a matching fence style, or a slope that a stock gate can’t handle, fabrication is the answer. Expect $3,200 to $9,500 for a fabricated residential gate with powder coat finish, depending on size, material, and design. Georgetown’s older custom homes often have non-standard openings, and a generic 12-foot panel from the home center simply will not look right or hang correctly.
Custom Steel and Aluminum Gates
We fabricate steel gates for security and weight, aluminum for corrosion resistance and lighter operation. A fabricated steel gate off a Georgetown street with heavy tree canopy will hold up fine if the powder coat is done right. We specify coatings for Central Texas sun exposure, not coastal conditions.
Matching Fence Styles
If you have a wrought-iron fence along your Georgetown property line, a fabricated gate should match the picket spacing and top profile. A mismatch looks like an afterthought, and it hurts the whole property. We take field measurements and build to the opening, not the other way around.
Trusted Brands We Service in Georgetown
We’re trained on nine gate-motor brands, so the parts and programming match the system on your Georgetown property. For most Georgetown homes, we install and service Viking, DoorKing, and Ghost Controls openers. Viking and DoorKing are common on heavier steel gates and commercial-style residential entries; Ghost Controls shows up often on DIY kits that need a proper retrofit. Because we service these brands daily, we can usually pull parts without a multi-day wait for a Georgetown customer. That matters when a gate is stuck closed and you need the driveway back.
Common Gate Installation Problems We See in Georgetown Homes
- Expansive clay movement at the hinge post. Blackland Prairie soil shrinks in drought and swells after rain, which slowly levers gate posts out of plumb. Fixing only the gate panel means the sag returns within a season.
- Missing or non-working safety photocells and edge sensors. An automatic gate without functional entrapment protection violates UL 325 and is dangerous, especially for children and pets. We test reversal force on every new install.
- Undersized post footings. The 24-inch footing depth that works in Round Rock or Cedar Park often fails in Georgetown’s clay. We use deeper, bell-shaped footings to anchor posts below the active shrink-swell zone.
- Incorrect opener type for the gate weight. A light-duty opener on a heavy steel gate burns out the gearbox. We size the opener to the actual gate weight and cycle frequency, not a generic chart.
Pricing for Gate Installation in Georgetown, TX
A standard single swing driveway gate with a Viking or DoorKing opener in Georgetown runs $4,200 to $7,800. A double swing gate adds $1,200 to $2,500. A sliding gate on a rack and pinion setup runs $5,500 to $9,500. Pedestrian gates are the most affordable at $1,800 to $4,200 installed. The biggest cost variables are footing depth, power run length, gate material, and opener brand. One thing doesn’t change: you get a written price before any work starts. The number on that quote is the number you pay – no adjustments at the door. Call (469) 530-2485 for a free estimate on your Georgetown gate.
We Also Serve Cities Near Georgetown
Our crews serve Georgetown plus the surrounding Williamson County area. That includes Round Rock, Hutto, Leander, and Cedar Park. If your property sits outside Georgetown proper, we’ll still come out, measure, and write a quote the same way we do inside the city limits.
Serving Georgetown, TX – Our Local Coverage Area
We’re based in the Georgetown area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Georgetown
Most residential gate installations in Georgetown take two to four days from the first post hole to final safety testing. A simple pedestrian gate can go in one day. A fabricated double swing gate with a new opener, deeper footings, and a power run can take a full week, especially if we’re working around weather or waiting on a custom powder coat. Call (469) 530-2485 and we’ll give you a realistic schedule in writing.
Georgetown requires a permit for most automatic gate installations, particularly when electrical work or a new operator is involved. The City of Georgetown development services office handles these permits. We handle the permit paperwork as part of the job, so you’re not chasing forms yourself. Call (469) 530-2485 for specifics on your property.
For Georgetown’s heat and humidity, we most often recommend Viking or DoorKing openers for heavy steel gates, and Ghost Controls for lighter residential swing gates. These are continuous-duty rated and hold up to Central Texas summers without overheating. We stock repair parts for all three brands locally, which shortens turnaround when something does fail.
A gate that keeps sagging in Georgetown is almost always a hinge post problem, not a gate panel problem. The expansive clay under the post shifts with moisture, and a post set at a shallow depth will move every season. The fix is a deeper, bell-shaped footing that anchors the post below the shrink-swell zone. Patching the hinge or adjusting the panel without addressing the footing will not hold.
Yes. Automatic gate operators in Georgetown must comply with UL 325, which requires photo eyes or contact edge sensors that reverse the gate when something is in the path. We install and test these on every automatic gate job, and we verify the reversal force before we leave the site. A gate without working entrapment protection is a serious liability. Call (469) 530-2485 for a free estimate that includes all required safety equipment.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Georgetown, TX under The Garrison Standard since 2008.