Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Kendall
Gate installation in Kendall means dealing with two things: sandy soil that shifts and a wet season that floods shallow ground. A gate that is not set on deep footings and wired with sealed enclosures will fail here. We know that because we work Kendall every week, from Kendale Lakes to West Kendall to the streets off Killian Drive. Call (469) 530-2485 for a free estimate, and we’ll give you a written price before any work starts.
Why Carver Gate Repair Is Kendall’s Preferred Gate Installation Company
Kendall homeowners call us because we show up when we say we will and the number we quote is the number they pay. That is the Garrison Standard, and it has been the same since 2008. Every technician who comes to your Kendall home is background-checked and uniformed. Every job includes a written guarantee good for a full year. If something fails inside that window, we come back and fix it at no charge. That is not a promise we make lightly.
Our dispatch is coordinated from our Miami office, but the crews working your gate live and work in the Kendall area. They know the difference between a 1960s ranch off Sunset Drive with a narrow driveway and a newer gated community off Kendall Drive with an HOA that has specific height and style rules. That local knowledge keeps your installation moving without surprises.
Automatic Gate Installation in Kendall
Automatic gate installation in Kendall is more than setting posts and hanging a gate leaf. The operator has to survive our rain, our humidity, and the salt air that drifts in from Biscayne Bay. We install swing and slide operators from brands including Viking, Ghost Controls, and DoorKing, and we mount every operator on a properly poured concrete pad with sealed conduit runs. A typical single swing operator installation in Kendall runs $2,800 to $4,600, including the operator, arms, safety edges, photo-eyes, and control wiring. A slide gate with operator typically falls between $4,200 and $7,800, depending on gate weight, track length, and whether the existing access has power nearby.
Operator Selection for Kendall’s Climate
We specify operators rated for continuous duty and humid environments. A Viking or DoorKing slide operator holds up better in Kendall than a light-duty residential unit meant for dry western climates. We also size the operator based on gate weight, not just width, because Kendall’s wind and rain add resistance to any leaf that catches weather.
Safety Reversal and Entrapment Testing
Every automatic gate we install in Kendall gets tested against UL 325 requirements before we leave. That means the gate reverses when it hits resistance, the photo-eyes break the close cycle, and the warning placards are mounted where they can be seen. We test the safety loop with the gate both open and closed so a car parked on the in-ground sensor never gets pinned.
Gate Installation Services in Kendall
Gate installation services in Kendall cover everything from a new driveway swing gate to a full perimeter opening with a slide gate and pedestrian access. What the job includes depends on your property: a standard single swing gate on a residential driveway runs $2,200 to $4,400 installed, while a double swing gate set and hung correctly runs $3,800 to $7,200. A pedestrian gate set in a block wall or fence opening is the most affordable, typically $1,400 to $2,600.
Groundworks and Post Setting
Kendall’s sandy soil does not hold a shallow post. We dig footings below the local frost line and deeper than the loose top layer, usually 36 to 42 inches, and set every post in concrete with rebar. A post set 24 inches deep in this soil will lean within two years, and then the gate drags, the operator overheats, and you are paying for a repair that should never have happened.
Power Runs and Control Wiring
A new automatic gate needs power and low-voltage control wiring. If your driveway does not have a nearby outlet, we run a dedicated circuit from your panel to a weather-rated junction box at the gate. We do not tap an existing landscape lighting circuit. That is a fire risk and a code violation, and it is exactly the kind of shortcut we will not take on a Kendall job.
What happens when you call
- 1
A real person answersNo phone trees – you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kendall
Our technicians are trained on nine gate-motor lines, and we keep common control boards, limit switches, and safety photo-eye kits stocked for the brands most often installed across Kendall. That includes Viking, Ghost Controls, DoorKing, and Elite. When a control board fails on a door in Country Walk or a photo-eye gets soaked by sprinklers in Three Lakes, we usually have the part in the truck and can finish the job the same day. That matters in Kendall’s wet season, when a gate stuck open becomes a security problem by nightfall.
Common Gate Installation Problems We See in Kendall Homes
- Water in the junction box. Kendall’s high water table and daily summer downpours push water into unsealed enclosures. Once a control board or photocell connection gets wet, the gate stops, starts randomly, or fails to reverse. We replace boxes with NEMA 4X enclosures rated for temporary submersion.
- Sagging posts in sandy soil. The top layer of soil across much of Kendall is loose and drains fast. Post footings that are too shallow or not reinforced start to lean after a few heavy rains. We set posts in concrete with rebar and let the concrete cure before hanging the gate.
- Photocell failure from sprinkler overspray. Sprinkler heads aimed at the driveway soak safety sensors daily. The lenses fog, the circuits corrode, and the gate loses entrapment protection. We mount photo-eyes away from direct spray and use weather-shielded housings.
- Wrong operator for the gate weight. A heavy iron gate hung on a light-duty operator will burn out in two years in Kendall’s heat and humidity. We size operators by actual gate weight and duty cycle, not by what is cheapest to sell.
Pricing for Gate Installation in Kendall, FL
Gate installation in Kendall runs from about $1,400 for a basic pedestrian gate to $7,800 for a full slide gate with automatic operator. A typical single swing gate with a motor lands between $2,800 and $4,600. Double swing gates run $3,800 to $7,200 installed. What moves the price is gate material, gate weight, whether we need to run a new power circuit, and whether the site needs extra concrete work. We give you a written line-item price before any work starts, and that number does not move at the door. Call (469) 530-2485 for a free estimate.
We Also Serve Cities Near Kendall
Our crews work throughout South Florida, including Jacksonville, Miami, Tampa, and Orlando. If you are outside Kendall but need Gate Installation with the same written prices and guarantee, we can schedule you from the same dispatch desk. The response time to areas outside Kendall may be longer, so call ahead when you can. Learn more about how we serve Gate Installation in Kendall and the surrounding communities.
Serving Kendall, FL – Our Local Coverage Area
We’re based in the Kendall area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Kendall
Most automatic gate installations in Kendall take two to three days on site: day one for footings and concrete, day two for hanging the gate and mounting the operator, and day three for fine-tuning and safety testing. If we are replacing an existing gate, the job often finishes in a single day. Call (469) 530-2485 and we will give you a timeline in writing with your estimate.
Yes. We install openers in NEMA 4X enclosures and run wiring through sealed conduit so the system handles standing water. In Kendall’s wet season, groundwater can sit in the area around a gate post for days, so we also elevate junction boxes above soil level and use marine-grade wire connections. If your yard floods, we will walk the site before pricing and factor drainage into the plan.
In most cases, yes. Miami-Dade County requires permits for new automatic gate installations, including electrical work. We prepare the submittal documents and work with the county inspector so the final installation is code-compliant. If you are in an unincorporated Kendall neighborhood, the county rules still apply; we will confirm the requirements for your specific address before we start.
Automatic gates in Kendall must meet UL 325 safety standards, which means the gate reverses on contact, the photo-eye sensor stops the close cycle when blocked, and warning signs are mounted on both sides of the gate. We test every one of these before we leave the site, and we include a copy of the written test record with your paperwork.
We prevent sagging by digging post holes 36 to 42 inches deep, below the loose sandy topsoil, and setting every post in concrete with rebar. We also let the concrete cure completely before hanging the gate. A post set shallow will lean within two years in Kendall soil; we would rather take an extra day and not come back. For an exact quote, call (469) 530-2485. Estimates are free.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Kendall, FL.