Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Paradise
Gate installation in Paradise means dealing with Clark County permitting, zero-lot-line setbacks, and clay soil that shifts posts if the footing isn’t deep enough. We handle all of that for you. Our crews install driveway gates, pedestrian gates, and electric gate operators across Paradise every week, from the streets off Paradise Road near the Convention Center to the residential pockets south of Flamingo. We know what the county requires and we know what works in this soil. Call (469) 530-2485 and a live person answers, no voicemail queue.
Why Carver Gate Repair Is Paradise’s Preferred Gate Installation Company
Paradise homeowners deal with the same thing we see county-wide: contractors who quote a gate install, show up late, and then hand over an invoice that doesn’t match the number they gave on the phone. We don’t operate that way. Every install starts with a written price, delivered before any work begins. The number on that sheet is the number you pay, full stop. Lonnie Burke, who runs our Paradise service team, enforces The Garrison Standard on every job: written prices, background-checked and uniformed technicians, and a 365-Day Done Right Promise in writing on every repair and install. If it’s not right, we come back and make it right, free, within the guarantee year.
We’re part of the Garrison Partners family, operating since 2008, and every Carver location works to the same standard. When a Paradise customer calls, the phone is answered by a person, not a recording, 24 hours a day. That includes weekends and holidays. For a gate that won’t close at midnight, that’s the difference between someone driving out and someone calling back on Monday.
Electric Gate Installation in Paradise
Electric Gate Installation in Paradise typically runs $2,800 to $6,500, depending on the operator, panel size, and power work involved. Most Paradise lots are small or zero-lot-line, which means the operator and the panel have to be matched carefully. A heavy steel panel on an undersized operator fails early and pushes the motor out of alignment within months, not years. We size the operator to the panel and the use cycle, not to a generic spec sheet.
Every electric install includes the safety equipment Nevada requires under UL 325: a photocell or edge sensor that detects obstructions, and reversal testing after the operator is mounted. We also run the power correctly, either from an existing circuit or by pulling a new run with an appropriate disconnect. The county inspects this work, and we build it to pass the first time.
Operator and Control Setup
We mount the operator, install the keypad or intercom, and set limit switches so the gate stops where it should, not where it happens to drift. Homeowners often ask for a wireless keypad or a phone app. Both are doable. We configure access so you control who opens the gate from your driveway, not the other way around.
Safety Sensor Installation
Photocells and edge sensors are not optional extras. A gate without entrapment protection is a red-tag hazard waiting for the first county inspection or the first person caught in the path. We install sensors on every automatic gate, test them, and show you exactly how they work before we finish.
Driveway Gate Installation in Paradise
Driveway Gate Installation in Paradise typically runs $3,200 to $7,800 for a full job, including gate panel, posts, operator, safety sensors, and site cleanup. The range depends on panel material and length, whether the existing driveway has power nearby, and whether the old posts need to be pulled and re-poured. Many Paradise driveway gates sit on shallow footings poured years ago and never built for an automated system.
A proper install in this part of Clark County means digging a footing deep enough to sit below the expansive clay layer that shifts with wet-dry cycles. We check the recorded plat line before digging, because on zero-lot-line lots the property boundary is often closer to the driveway edge than homeowners assume. An install that crosses the line even a few inches becomes your problem when the neighbor surveys.
Post Setting and Footing Depth
For a residential swing or slide gate in Paradise, we typically go 36 to 42 inches for post footings, which is deeper than a standard fence post because the gate post carries cyclical load every time the operator cycles. In clay-dominant soil near wash corridors, that extra depth keeps the rack and pinion alignment true. Shallow footings are the most common root cause of a driveway gate that sags within 18 months.
Gate Panel and Hinge Sizing
The hinge post has to be sized for the full panel weight plus wind load, not just the panel as it sits still. We see undersized hinge posts all over Paradise, especially on double gates where the original install saved a few dollars on steel. We size the post, the hinges, and the operator together so the panel hangs square and cycles clean.
Trusted Brands We Service in Paradise
Our Paradise technicians work on FAAC and BFT swing operators, Linear slide operators, and Viking equipment, among others. That matters because the parts and the programming are brand-specific. A FAAC operator has a different control board and different limit switch hardware than a Linear unit. We stock common parts locally and can source brand-specific components quickly, so a repair doesn’t turn into a two-week wait for a bolt from a distributor. If your existing gate already has a working operator and you just need a new panel or a sensor, we work with what’s there. Full list of what we install and service is on our Gate Installation page.
Common Gate Installation Problems We See in Paradise Homes
- Post shift from expansive clay soil. Paradise sits on clay that swells when wet and shrinks when dry. A post footing poured too shallow lifts and tilts within 12 to 18 months, and the gate starts dragging or binding. Swings near wash corridors are the worst.
- Missing or bypassed safety sensors. An automatic gate without a working photocell or edge sensor fails UL 325 entrapment protection. This is the single most common red-tag item we see on existing Paradise installations.
- Hinge post undersized for the panel. Homeowners or previous contractors hang a heavy steel panel on a post built for a lighter gate. The hinge side sags, the latch side drops, and the gate starts scraping the driveway. That sag correction work usually costs more than doing the post right the first time.
- Operator mounted on a footing that was never designed for automation. A gate built as a manual swing gets a motor bolted on years later. The post was never engineered for the operator’s torque. Rack and pinion alignment drifts, and the gears wear unevenly until the motor strips or stalls.
Pricing for Gate Installation in Paradise, NV
Here are the ranges we quote most often for Paradise work:
- Pedestrian gate install: $950 – $2,200
- Electric gate operator install on existing gate: $1,400 – $3,100
- Complete driveway gate with operator and sensors: $3,200 – $7,800
- Swing gate install (new posts, panel, operator): $3,500 – $7,200
- Sliding gate install (track, operator, safety edges): $4,000 – $8,500
What moves the price inside those ranges: panel material and length, whether we’re pulling old posts, how far the power run is, and whether Clark County requires a plan submittal for your specific lot. You get one written price before we start. The estimate is free, and the number doesn’t change when the work is underway. Call (469) 530-2485 for an exact quote.
Safety on Gate Installation Work
Gate operators run on high-tension springs, heavy steel panels, and electrical power. The danger is real. A torsion spring under load can break bones or worse, and an energized operator can crush a hand or a child if the sensors aren’t working. We never recommend homeowners attempt post removal, spring adjustment, or operator wiring themselves. Our technicians are trained for this work, carry the right tools, and follow UL 325 testing on every automatic gate. If your gate is misbehaving, don’t try to force it. Call us and let a trained crew handle it.
We Also Serve Cities Near Paradise
Our crews cover Gate Installation in Paradise and the surrounding communities: Las Vegas, Henderson, North Las Vegas, and Enterprise. If you’re just outside the Paradise boundary, call anyway. Dispatch is coordinated from the brand’s Las Vegas office, and we send Paradise-local crews to jobs throughout the metro.
Serving Paradise, NV – Our Local Coverage Area
We’re based in the Paradise area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Paradise
Yes. Paradise is unincorporated Clark County, so gate installation permits go through Clark County Public Works, not a city building department. We handle the permit path as part of the install and build to county spec so the inspection passes clean the first time. If you want to know whether your specific project needs a plan submittal, call (469) 530-2485 and we’ll walk you through it.
For a residential swing or slide gate, we typically set post footings 36 to 42 inches deep, below the active clay layer. That’s deeper than a standard fence post, and it’s what keeps the gate from shifting as Paradise clay expands and contracts through wet and dry seasons.
Usually, yes, provided the post footings are deep enough and the posts are plumb. On many Paradise properties the existing post isn’t up to carrying motor torque, so we pull and re-pour before mounting the operator. It adds cost up front but prevents the rack and pinion alignment from failing inside two years. A typical operator-on-existing-gate install runs $1,400 to $3,100.
Nevada follows UL 325, which requires photocells or edge sensors, plus reversal testing after installation. A gate that stops and reverses when it hits an obstruction is the minimum bar. We install those sensors on every automatic gate and test them with a simulated obstruction before we leave the site.
Most residential installs take two to three days from start to finish: day one for post excavation and concrete, a day for concrete cure, then panel and operator mounting. If the job requires a Clark County plan submittal, add a week or two for review. We’ll give you a written timeline with the written price, and the schedule is agreed before any work starts. Estimate is free, so call (469) 530-2485.
Yes. We work all over Paradise, from the neighborhoods off Tropicana and Flamingo to the residential streets east of the Strip and the older lots along Maryland Parkway. If you’re in 89169, 89119, or 89103, a technician is close by. Scheduling is coordinated from the Las Vegas office, and crews serve Paradise daily.
Need a gate installed right in Paradise? Call (469) 530-2485 now. A live person answers, the estimate is free, and the price we write down is the price you pay. No moving numbers, no no-shows, no clean-up left behind. That’s the job, done to Garrison Standard.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Paradise since 2008.