Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Pomona
Gate installation in Pomona comes down to two things: getting the footings right and matching the operator to the gate. Most of the calls we take from Pomona homeowners aren’t for brand-new construction. They’re for replacing a gate that sagged, dragged, or stopped opening because the original install cut corners. We serve all of Pomona, including the neighborhoods around Lincoln Park, Phillips Ranch, Westmont, and the historic districts near downtown. Call us at (469) 530-2485 and you’ll talk to a live person who can schedule a free measure and written quote.
Why Carver Gate Repair Is Pomona’s Preferred Gate Installation Company
Our Pomona customers tend to ask the same questions: what does a proper installation actually include, how long will it take, and will the price move once the work starts. We answer all three before we ever break ground. The Garrison Standard means a written price before any work starts, background-checked and uniformed technicians on your property, and a 365-Day Done Right Promise on every repair. If something fails inside that year, we come back free. No charge, no argument.
Lonnie Burke runs our crews to that standard on every job. Dispatch and scheduling for Pomona are coordinated from our Los Angeles office, and the technicians who show up at your driveway are the same ones you’ll see through to the final walk-through. We don’t subcontract gate work. We stock parts locally for Pomona customers, which means less waiting on a distributor when a bracket or control board needs replacing mid-install.
Electric Gate Installation in Pomona
Electric Gate Installation in Pomona usually means one of two scenarios: a homeowner replacing an old manual gate with a motorized one, or an existing electric gate that’s beyond repair and needs a full replacement. Either way, the work starts the same – checking the post footings, measuring the gate weight and panel dimensions, and confirming the power run. The operator gets matched to the actual load, not to whatever was on sale at the supply house. Depending on size and access, a complete electric gate installation in Pomona typically runs $4,500 to $9,800.
Operator Selection and Matching
We don’t install an operator that’s too small for the gate. A swing gate operator that has to strain shortens its own life and wears out limit switches fast. We calculate the gate weight, panel width, and wind exposure before recommending a unit. We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, which means we can match the operator to whatever is already on the property or to what makes sense for a new installation.
Full Installation Scope
A complete electric gate installation includes the operator, hinge adjustment or replacement, safety photocells, keypad or remote entry, and full UL 325 entrapment testing before we leave. We run the power properly, in conduit where code requires it, and we don’t leave extension cords strung across a planter bed. That’s the difference between a gate that works for a decade and one that needs a service call every few months.
Driveway Gate Installation in Pomona
Driveway Gate Installation in Pomona often starts with a problem the homeowner already knows about: the old gate sagged off its hinge post, dragged on the concrete, or the post itself moved. The mid-century homes around Lincoln Park and Westmont were built with driveway layouts and footings that were never meant to carry a 400-pound gate panel for forty years. A new gate panel on the old posts will fail the same way. In Pomona, a proper driveway gate installation with new post footings typically runs $3,800 to $8,600 depending on width, material, and whether we’re reusing any existing structure.
Why Post Footings Matter Here
Pomona’s older neighborhoods contain a large number of mid-century homes with original or lightly upgraded driveway layouts, and many of those gates are swing gates whose hinge posts were set in shallow or undersized footings. That is why so many installations here need new post footings rather than just a new panel or operator. We dig out the old concrete, set the post to the right depth and diameter, and let it cure before we hang anything on it. It adds a day or two to the job. It also keeps the gate plumb for the next thirty years.
Materials for Pomona Conditions
Pomona gets real heat in the summer, and that means steel panels expand and move. We account for that in hinge placement and gate gap spacing. For most driveways, we recommend powder-coated steel or aluminum depending on the homeowner’s priorities for weight and finish. Aluminum weighs less, which is easier on the operator. Steel is more rigid, which matters for wide double gates.
Trusted Brands We Service in Pomona
Our technicians are trained across nine gate-motor brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. In Pomona we see a lot of LiftMaster operators on older swing gates, and a fair number of FAAC and BFT units on newer installations. That matters because a BFT control board doesn’t wire like a LiftMaster, and using the wrong replacement part is how a simple repair turns into a repeat failure. We keep common parts in local stock for Pomona calls, which shortens turnaround when something breaks mid-install.
Common Gate Installation Problems We See in Pomona Homes
- Hinge posts set in shallow footings on older driveways. The gate sags, the panel drags, and the operator works harder than it should. We see this constantly in neighborhoods built from the 1950s through the 1970s, including areas around Lincoln Park and along Holt Avenue.
- Reusing the existing slab or gate frame without checking the footing. It’s tempting to save money by keeping the old posts, but the sag comes back within a year. We’ll tell you straight if the footing needs replacing versus if it can be reinforced.
- Skipping entrapment protection on a new operator. Every electric gate in California needs UL 325-compliant safety edges and photocells, properly tested. A gate without working entrapment protection is dangerous, and it’s a code violation.
- Running a slide gate without a loop detector where traffic requires it. On driveways near curb cuts and sidewalks, a loop detector or safety photocell keeps the gate from closing on a car or a pedestrian. It’s not optional equipment in those situations.
In the Lincoln Park area of Pomona, we replaced a tired swing gate on a 1970s driveway where the hinge post had moved enough that the panel dragged and the LiftMaster operator was straining against it. We pulled the old post, poured a proper footing, reset the hinge post, and installed a new swing gate with a LiftMaster operator, safety photocells, and a keypad entry. During the final walk-through we ran reversal testing and showed the homeowner the safety edge working before we left.
Pricing for Gate Installation in Pomona, CA
In Pomona, a pedestrian gate installation runs $1,100 to $2,900. A single swing driveway gate with new post footings runs $3,800 to $8,600. A full electric driveway gate with operator, safety equipment, keypad, and power run runs $4,500 to $9,800. What moves the number is the post footing work, the gate width and material, the operator brand, and whether we’re running a new electrical circuit from the panel. Every quote is written, itemized, and agreed before any work starts. The price on that sheet is the price you pay. Call (469) 530-2485 for a free measure and written estimate.
We Also Serve Cities Near Pomona
Our Gate Installation team covers Pomona and the surrounding communities. If you’re in Diamond Bar, Montclair, Chino Hills, or Claremont, we can schedule the same free measure and written quote. Each job gets the same Garrison Standard: written pricing, background-checked technicians, and a 365-Day Done Right Promise on every repair.
Serving Pomona, CA – Our Local Coverage Area
We’re based in the Pomona area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Pomona
Most driveway gate installations in Pomona take 2 to 4 days from the first cut to the final walk-through. If we’re replacing post footings, that adds a day or two for concrete to cure before we hang the gate. You’ll get a clear timeline in your written estimate before work begins. Call (469) 530-2485 to schedule a free measure and get your installation window.
If your existing hinge post has moved, the footing is undersized, or the concrete is cracked, yes. Many homes in Pomona’s older neighborhoods have original footings that weren’t built for the weight of a modern gate. We’ll inspect the posts during the free measure and tell you honestly if they can be reused or need replacing. Estimates are free.
Every new electric gate in Pomona should include UL 325-compliant entrapment protection: safety photocells across the gate opening and a reversing edge or inherent obstruction detection on the operator. If the gate opens toward a sidewalk or street, additional protection may be required. We test all safety equipment during the walk-through before we leave. Call (469) 530-2485 to discuss your specific gate configuration.
Yes. We install swing and slide gate operators on sloped driveways in Pomona regularly. The operator needs to be matched to the gate weight plus the slope load, and hinge placement has to account for the grade. This is one of the reasons we don’t use generic operator sizing charts. A free measure will tell you exactly what your driveway requires.
We install and service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems in Pomona. If you have an existing operator and want to keep the same brand, we’ll match parts and programming to what’s already installed. If you’re open to a different brand for a new installation, we’ll recommend based on gate weight, usage, and budget. Call (469) 530-2485 with your current gate details and we’ll tell you what’s possible before scheduling anything.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Pomona and surrounding communities with written pricing, trained technicians, and a full-year guarantee on every repair since 2008.