Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Selma
Gate installation in Selma typically runs $2,800 – $7,500 for a complete residential system, with most projects measured and scheduled within a week. Our Gate Installation crews coordinate dispatch from our San Antonio office and carry the full inventory of swing operators, slide tracks, and access hardware needed for Selma’s mix of newer developments off Lookout Road and established properties near the Retama Park corridor. We’re familiar with the clay-heavy soils that shift after Texas rain, the wind exposure that comes with open terrain, and the HOA requirements that govern everything from gate height to finish color in communities along Evans Road. Call (469) 530-2485 to book a free measure and written price.
Why Carver Gate Repair Is Selma’s Preferred Gate Installation Company
We’ve installed gates at homes from The Ridge at Lookout to properties backing up to Cibolo Creek, and the pattern is consistent: Selma homeowners want the job done once, done right, and done by someone who shows up when they say they will. That’s The Garrison Standard, and it’s how we’ve operated since 2008.
Our technicians are background-checked and uniformed on every call. You get a written price before any work starts, and our 365-Day Done Right Promise covers every installation in full. If something fails inside that year, we come back free. No argument, no re-quote.
Phones are answered by a live person 24 hours a day, including weekends and holidays. When you’re ready to move forward in Selma, you’re not waiting on a callback queue.
Gate Opener Installation in Selma
Gate Opener Installation in Selma means matching the right operator to your gate type, your daily traffic, and the power setup at your property. Most Selma homes with existing 110V near the gate post can run a standard swing or slide operator; properties without nearby power need a low-voltage system or a solar-ready unit, which we see frequently on larger lots off Schertz Parkway where the meter sits well back from the road. A typical opener installation in Selma runs $1,200 – $2,800 for the unit, mounting, wiring, and safety devices.
Articulating Arm vs. Linear Actuator
An articulating arm folds as it pushes, which clears tight spaces where a straight arm would hit a pillar or wall. Linear actuators extend and retract in a straight line, simpler and quieter, but they need more clearance. In Selma’s newer communities with stone-clad columns, we usually recommend the articulating setup.
Loop Detectors and Safety Edges
Every opener we install includes a loop detector for vehicle sensing and safety edges that reverse the gate on contact. These aren’t extras; they’re required by UL 325 and we don’t quote without them. The loop gets cut into your driveway, sealed, and wired back to the control board.
Gate Fabrication in Selma
Gate Fabrication in Selma covers everything from a custom wrought-iron driveway gate to aluminum pedestrian entries that match HOA specs in communities along Lookout Road. We measure on-site, fabricate to fit your exact opening, and install with hardware rated for Texas wind loads. A custom fabricated gate in Selma typically runs $3,500 – $8,500 depending on width, height, material, and finish. Steel gates cost more and last longer; aluminum resists corrosion without the weight but won’t take the same impact.
Wind Load and Local Code
Selma sits in Bexar County’s 110 mph wind zone, which means gate frames need diagonal bracing and posts set in concrete footings at least 36 inches deep. We engineer for that standard on every fabrication, not as an upgrade.
Matching Existing Fencing
When your gate needs to blend with an existing fence line, we pull samples from your current pickets or panels and match the profile, spacing, and color. Powder coat finishes carry a 10-year warranty against fade and chalking in direct sun.
Trusted Brands We Service in Selma
We stock parts and install new systems from Linear, Viking, and Ghost Controls, along with six other major brands. For Selma customers, that means faster turnaround when a motor fails and no waiting on cross-country shipping for a limit switch or control board. Our technicians train on each manufacturer’s programming sequence, so a Viking slide operator gets set up with Viking-specific parameters, not generic defaults. We also handle Gate Motor Repair in Selma and Gate Repair in Selma for systems already in the ground.
Common Gate Installation Problems We See in Selma Homes
- Shifting posts after spring rains. Selma’s clay soils expand and contract with moisture, and gate posts set in shallow footings lean within two years. We pour 36-inch minimum footings with rebar cages on every installation.
- Corrosion on hardware near Cibolo Creek. Properties with drainage exposure or morning fog off the creek see faster rust on hinges and latches. We spec stainless or galvanized hardware for those locations.
- HOA rejection of standard designs. Communities near Retama Park and along Evans Road have specific aesthetic requirements. We pull the CC&Rs before fabricating and submit shop drawings for approval if required.
- Inadequate power at the gate line. Older Selma homes often have no 110V run to the property edge. We handle the trenching, conduit, and electrical connection as part of the install scope, not as a surprise add-on.
Pricing for Gate Installation in Selma, TX
A typical driveway gate installation in Selma runs $2,800 – $5,500 for a standard single swing with operator; double swing or slide systems range $4,200 – $7,500. Pedestrian gates without automation start around $1,800. Security gates with access control, intercom, and keypad add $800 – $2,200 depending on the hardware tier. What moves the number: gate width and height, material choice (steel vs. aluminum), automation level, power run distance, and whether we need to remove an existing system. Every price is written and agreed before work starts. Call (469) 530-2485 for a free measure and exact quote for your Selma property.
We Also Serve Cities Near Selma
Our crews work across the region, and we regularly handle Gate Installation in Selma alongside projects in Houston, San Antonio, Dallas, and Fort Worth. Dispatch is coordinated from our San Antonio office, with local technicians assigned to each market for faster response.
Serving Selma, TX – Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage – if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Selma
Most Selma installations are measured within a week and scheduled within two to three weeks after approval, depending on fabrication lead time. Call (469) 530-2485 to check current availability.
We install gates throughout Selma, including The Ridge at Lookout, communities along Evans Road, and properties near Retama Park and Schertz Parkway. If you’re inside Selma city limits or in nearby unincorporated Bexar County, we cover it.
We don’t offer same-day installation, gates are measured, fabricated, and scheduled. For urgent gate security needs, we can often perform a temporary secure closure while your custom gate is in production. For existing gate failures, our live-answer line is open 24/7.
Selma pricing is comparable to San Antonio, though properties on larger lots with longer power runs may see slightly higher costs for trenching and conduit. We quote each job individually, and your written price is locked before work begins.
Every installation carries our 365-Day Done Right Promise in writing. If any part of the work fails within one year from completion, we return and fix it at no charge. The gate structure and powder coat carry manufacturer warranties up to 10 years depending on material.
Written by Lonnie Burke, Owner at Carver Gate Repair, serving Selma since 2008.